Gentoo Archives: gentoo-amd64

From: Drake Donahue <donahue95@×××××××.net>
To: gentoo-amd64@l.g.o
Subject: Re: [gentoo-amd64] Re: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown block(2,0)
Date: Mon, 12 Dec 2005 05:37:54
Message-Id: 001101c5fedd$f1ca9460$0200a8c0@donahues.us
In Reply to: Re: [gentoo-amd64] Re: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown block(2,0) by Felipe Ribeiro
our grub.conf and fstab are virtual twins should not be problem
according to asus web site, asus k8s-mx does not have a sis5513 drive 
controller, SiS 965L south bridge instead, perhaps removing the sis5513 
entry from menuconfig and recompiling in hope generic drivers will get you 
up??
----- Original Message ----- 
From: "Felipe Ribeiro" <felipernb@×××××.com>
To: <gentoo-amd64@l.g.o>
Sent: Sunday, December 11, 2005 10:05 PM
Subject: Re: [gentoo-amd64] Re: Kernel panic - not syncing: VFS: Unable to 
mount root fs on unknown block(2,0)


> The hard drive is not sata neither scsi. > All file systems support are compiled into the kernel > > in fstab i have: > > /dev/hda1 /win vfat auto,user 1 0 > /dev/hda2 / reiserfs notail,defaults,noatime 1 2 > /dev/hda3 none swap sw 0 0 > /dev/cdrw /cdrw iso9660 auto,ro,user 0 0 > /dev/cdrom1 /cdrom iso9660 auto,ro,user 0 0 > /dev/fd0 /floppy auto noauto,user 0 0 > > proc /proc proc defaults 0 0 > > shm /dev/shm tmpfs nodev,nosuid,noexec 0 0 > > i have no /boot partition, it is in my root partition. > > i compilled the kernel manually, and when it generated the bzImage file, i > moved it to /boot/bzImage-2.6.14 > > Here i put my new grub.conf file and my .config file from kernel. > > Cheers, > Felipe > > ----- grub.conf ----- > timeout 5 > > default 1 > > vga=0x315 > video=vesafb:mtrr,ywrap > splashimage=/boot/grub/splash.xpm.gz > > title Gentoo Linux > root (hd0,1) > kernel /boot/bzImage-2.6.14 root=/dev/hda2 > > title Windows XP > rootnoverify (hd0,0) > makeactive > chainloader +1 > > ------ end of grub.conf ----- > > ----- .config ----- > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.14-gentoo-r2 > # Sun Dec 11 23:24:13 2005 > # > CONFIG_X86_64=y > CONFIG_64BIT=y > CONFIG_X86=y > CONFIG_SEMAPHORE_SLEEPERS=y > CONFIG_MMU=y > CONFIG_RWSEM_GENERIC_SPINLOCK=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_X86_CMPXCHG=y > CONFIG_EARLY_PRINTK=y > CONFIG_GENERIC_ISA_DMA=y > CONFIG_GENERIC_IOMAP=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > CONFIG_CLEAN_COMPILE=y > CONFIG_LOCK_KERNEL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > > # > # General setup > # > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_POSIX_MQUEUE=y > # CONFIG_BSD_PROCESS_ACCT is not set > CONFIG_SYSCTL=y > # CONFIG_AUDIT is not set > CONFIG_HOTPLUG=y > CONFIG_KOBJECT_UEVENT=y > CONFIG_IKCONFIG=y > CONFIG_IKCONFIG_PROC=y > CONFIG_CPUSETS=y > CONFIG_INITRAMFS_SOURCE="" > # CONFIG_EMBEDDED is not set > CONFIG_KALLSYMS=y > CONFIG_KALLSYMS_ALL=y > # CONFIG_KALLSYMS_EXTRA_PASS is not set > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SHMEM=y > CONFIG_CC_ALIGN_FUNCTIONS=0 > CONFIG_CC_ALIGN_LABELS=0 > CONFIG_CC_ALIGN_LOOPS=0 > CONFIG_CC_ALIGN_JUMPS=0 > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > CONFIG_MODULE_FORCE_UNLOAD=y > CONFIG_OBSOLETE_MODPARM=y > # CONFIG_MODVERSIONS is not set > # CONFIG_MODULE_SRCVERSION_ALL is not set > CONFIG_KMOD=y > CONFIG_STOP_MACHINE=y > > # > # Processor type and features > # > CONFIG_MK8=y > # CONFIG_MPSC is not set > # CONFIG_GENERIC_CPU is not set > CONFIG_X86_L1_CACHE_BYTES=64 > CONFIG_X86_L1_CACHE_SHIFT=6 > CONFIG_X86_TSC=y > CONFIG_X86_GOOD_APIC=y > CONFIG_MICROCODE=y > CONFIG_X86_MSR=y > CONFIG_X86_CPUID=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_MTRR=y > CONFIG_SMP=y > CONFIG_SCHED_SMT=y > CONFIG_PREEMPT_NONE=y > # CONFIG_PREEMPT_VOLUNTARY is not set > # CONFIG_PREEMPT is not set > CONFIG_PREEMPT_BKL=y > CONFIG_K8_NUMA=y > # CONFIG_NUMA_EMU is not set > CONFIG_ARCH_DISCONTIGMEM_ENABLE=y > CONFIG_NUMA=y > CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y > CONFIG_ARCH_SPARSEMEM_ENABLE=y > CONFIG_SELECT_MEMORY_MODEL=y > # CONFIG_FLATMEM_MANUAL is not set > CONFIG_DISCONTIGMEM_MANUAL=y > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_DISCONTIGMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > CONFIG_NEED_MULTIPLE_NODES=y > # CONFIG_SPARSEMEM_STATIC is not set > CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y > CONFIG_NR_CPUS=32 > # CONFIG_HOTPLUG_CPU is not set > CONFIG_HPET_TIMER=y > CONFIG_X86_PM_TIMER=y > CONFIG_HPET_EMULATE_RTC=y > CONFIG_GART_IOMMU=y > CONFIG_SWIOTLB=y > CONFIG_X86_MCE=y > # CONFIG_X86_MCE_INTEL is not set > CONFIG_PHYSICAL_START=0x100000 > # CONFIG_KEXEC is not set > CONFIG_SECCOMP=y > # CONFIG_HZ_100 is not set > CONFIG_HZ_250=y > # CONFIG_HZ_1000 is not set > CONFIG_HZ=250 > CONFIG_GENERIC_HARDIRQS=y > CONFIG_GENERIC_IRQ_PROBE=y > CONFIG_ISA_DMA_API=y > CONFIG_GENERIC_PENDING_IRQ=y > > # > # Power management options > # > CONFIG_PM=y > # CONFIG_PM_DEBUG is not set > > # > # ACPI (Advanced Configuration and Power Interface) Support > # > CONFIG_ACPI=y > CONFIG_ACPI_AC=y > # CONFIG_ACPI_BATTERY is not set > CONFIG_ACPI_BUTTON=y > # CONFIG_ACPI_VIDEO is not set > CONFIG_ACPI_HOTKEY=m > CONFIG_ACPI_FAN=y > CONFIG_ACPI_PROCESSOR=y > CONFIG_ACPI_THERMAL=y > CONFIG_ACPI_NUMA=y > # CONFIG_ACPI_ASUS is not set > # CONFIG_ACPI_IBM is not set > # CONFIG_ACPI_TOSHIBA is not set > CONFIG_ACPI_BLACKLIST_YEAR=2001 > # CONFIG_ACPI_DEBUG is not set > CONFIG_ACPI_EC=y > CONFIG_ACPI_POWER=y > CONFIG_ACPI_SYSTEM=y > # CONFIG_ACPI_CONTAINER is not set > > # > # CPU Frequency scaling > # > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_TABLE=y > # CONFIG_CPU_FREQ_DEBUG is not set > CONFIG_CPU_FREQ_STAT=y > # CONFIG_CPU_FREQ_STAT_DETAILS is not set > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set > CONFIG_CPU_FREQ_GOV_USERSPACE=y > CONFIG_CPU_FREQ_GOV_ONDEMAND=y > # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set > > # > # CPUFreq processor drivers > # > # CONFIG_X86_POWERNOW_K8 is not set > # CONFIG_X86_SPEEDSTEP_CENTRINO is not set > CONFIG_X86_ACPI_CPUFREQ=y > > # > # shared options > # > CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y > # CONFIG_X86_SPEEDSTEP_LIB is not set > > # > # Bus options (PCI etc.) > # > CONFIG_PCI=y > CONFIG_PCI_DIRECT=y > CONFIG_PCI_MMCONFIG=y > CONFIG_UNORDERED_IO=y > # CONFIG_PCIEPORTBUS is not set > CONFIG_PCI_MSI=y > CONFIG_PCI_LEGACY_PROC=y > # CONFIG_PCI_DEBUG is not set > > # > # PCCARD (PCMCIA/CardBus) support > # > # CONFIG_PCCARD is not set > > # > # PCI Hotplug Support > # > # CONFIG_HOTPLUG_PCI is not set > > # > # Executable file formats / Emulations > # > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_MISC is not set > CONFIG_IA32_EMULATION=y > CONFIG_IA32_AOUT=y > CONFIG_COMPAT=y > CONFIG_SYSVIPC_COMPAT=y > CONFIG_UID16=y > > # > # Networking > # > CONFIG_NET=y > > # > # Networking options > # > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_UNIX=y > # CONFIG_NET_KEY is not set > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_FIB_HASH=y > CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > # CONFIG_IP_PNP_BOOTP is not set > # CONFIG_IP_PNP_RARP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_ARPD is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > # CONFIG_INET_TUNNEL is not set > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_BIC=y > # CONFIG_IPV6 is not set > # CONFIG_NETFILTER is not set > > # > # DCCP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_DCCP is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_SCTP is not set > # CONFIG_ATM is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > # CONFIG_NET_SCHED is not set > # CONFIG_NET_CLS_ROUTE is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_HAMRADIO is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > # CONFIG_IEEE80211 is not set > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > CONFIG_FW_LOADER=m > # CONFIG_DEBUG_DRIVER is not set > > # > # Connector - unified userspace <-> kernelspace linker > # > # CONFIG_CONNECTOR is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play support > # > CONFIG_PNP=y > # CONFIG_PNP_DEBUG is not set > > # > # Protocols > # > CONFIG_PNPACPI=y > > # > # Block devices > # > CONFIG_BLK_DEV_FD=y > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > # CONFIG_BLK_DEV_COW_COMMON is not set > CONFIG_BLK_DEV_LOOP=y > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_SX8 is not set > # CONFIG_BLK_DEV_UB is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=4096 > CONFIG_BLK_DEV_INITRD=y > CONFIG_LBD=y > CONFIG_CDROM_PKTCDVD=m > CONFIG_CDROM_PKTCDVD_BUFFERS=8 > # CONFIG_CDROM_PKTCDVD_WCACHE is not set > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > # CONFIG_ATA_OVER_ETH is not set > > # > # ATA/ATAPI/MFM/RLL support > # > CONFIG_IDE=y > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_IDE_SATA is not set > # CONFIG_BLK_DEV_HD_IDE is not set > CONFIG_BLK_DEV_IDEDISK=y > CONFIG_IDEDISK_MULTI_MODE=y > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > CONFIG_BLK_DEV_IDEFLOPPY=m > CONFIG_BLK_DEV_IDESCSI=m > # CONFIG_IDE_TASK_IOCTL is not set > > # > # IDE chipset support/bugfixes > # > # CONFIG_IDE_GENERIC is not set > # CONFIG_BLK_DEV_CMD640 is not set > # CONFIG_BLK_DEV_IDEPNP is not set > CONFIG_BLK_DEV_IDEPCI=y > # CONFIG_IDEPCI_SHARE_IRQ is not set > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_GENERIC is not set > # CONFIG_BLK_DEV_OPTI621 is not set > # CONFIG_BLK_DEV_RZ1000 is not set > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > # CONFIG_BLK_DEV_ATIIXP is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5520 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > # CONFIG_BLK_DEV_SC1200 is not set > # CONFIG_BLK_DEV_PIIX is not set > # CONFIG_BLK_DEV_IT821X is not set > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIIMAGE is not set > CONFIG_BLK_DEV_SIS5513=y > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_IDE_ARM is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_IVB is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_BLK_DEV_HD is not set > > # > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > CONFIG_SCSI=y > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > # CONFIG_BLK_DEV_SD is not set > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > CONFIG_CHR_DEV_SG=m > # CONFIG_CHR_DEV_SCH is not set > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > # CONFIG_SCSI_MULTI_LUN is not set > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI Transport Attributes > # > CONFIG_SCSI_SPI_ATTRS=y > # CONFIG_SCSI_FC_ATTRS is not set > # CONFIG_SCSI_ISCSI_ATTRS is not set > # CONFIG_SCSI_SAS_ATTRS is not set > > # > # SCSI low-level drivers > # > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_3W_9XXX is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > CONFIG_SCSI_AIC79XX=y > CONFIG_AIC79XX_CMDS_PER_DEVICE=32 > CONFIG_AIC79XX_RESET_DELAY_MS=4000 > # CONFIG_AIC79XX_ENABLE_RD_STRM is not set > # CONFIG_AIC79XX_DEBUG_ENABLE is not set > CONFIG_AIC79XX_DEBUG_MASK=0 > # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set > # CONFIG_MEGARAID_NEWGEN is not set > # CONFIG_MEGARAID_LEGACY is not set > # CONFIG_MEGARAID_SAS is not set > CONFIG_SCSI_SATA=y > # CONFIG_SCSI_SATA_AHCI is not set > # CONFIG_SCSI_SATA_SVW is not set > CONFIG_SCSI_ATA_PIIX=y > # CONFIG_SCSI_SATA_MV is not set > # CONFIG_SCSI_SATA_NV is not set > # CONFIG_SCSI_SATA_PROMISE is not set > # CONFIG_SCSI_SATA_QSTOR is not set > # CONFIG_SCSI_SATA_SX4 is not set > # CONFIG_SCSI_SATA_SIL is not set > # CONFIG_SCSI_SATA_SIS is not set > # CONFIG_SCSI_SATA_ULI is not set > CONFIG_SCSI_SATA_VIA=y > # CONFIG_SCSI_SATA_VITESSE is not set > CONFIG_SCSI_SATA_INTEL_COMBINED=y > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_IPR is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > CONFIG_SCSI_QLA2XXX=y > # CONFIG_SCSI_QLA21XX is not set > # CONFIG_SCSI_QLA22XX is not set > # CONFIG_SCSI_QLA2300 is not set > # CONFIG_SCSI_QLA2322 is not set > # CONFIG_SCSI_QLA6312 is not set > # CONFIG_SCSI_QLA24XX is not set > # CONFIG_SCSI_LPFC is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_DEBUG is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > # CONFIG_FUSION_SPI is not set > # CONFIG_FUSION_FC is not set > # CONFIG_FUSION_SAS is not set > > # > # IEEE 1394 (FireWire) support > # > # CONFIG_IEEE1394 is not set > > # > # I2O device support > # > # CONFIG_I2O is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > # CONFIG_DUMMY is not set > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > CONFIG_TUN=y > # CONFIG_NET_SB1000 is not set > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > > # > # PHY device support > # > # CONFIG_PHYLIB is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > CONFIG_MII=y > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > # CONFIG_CASSINI is not set > # CONFIG_NET_VENDOR_3COM is not set > > # > # Tulip family network device support > # > # CONFIG_NET_TULIP is not set > # CONFIG_HP100 is not set > CONFIG_NET_PCI=y > # CONFIG_PCNET32 is not set > # CONFIG_AMD8111_ETH is not set > # CONFIG_ADAPTEC_STARFIRE is not set > # CONFIG_B44 is not set > # CONFIG_FORCEDETH is not set > # CONFIG_DGRS is not set > # CONFIG_EEPRO100 is not set > # CONFIG_E100 is not set > # CONFIG_FEALNX is not set > # CONFIG_NATSEMI is not set > # CONFIG_NE2K_PCI is not set > # CONFIG_8139CP is not set > # CONFIG_8139TOO is not set > # CONFIG_SIS900 is not set > # CONFIG_EPIC100 is not set > # CONFIG_SUNDANCE is not set > CONFIG_VIA_RHINE=m > # CONFIG_VIA_RHINE_MMIO is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_R8169 is not set > CONFIG_SIS190=m > # CONFIG_SKGE is not set > # CONFIG_SK98LIN is not set > # CONFIG_VIA_VELOCITY is not set > # CONFIG_TIGON3 is not set > # CONFIG_BNX2 is not set > > # > # Ethernet (10000 Mbit) > # > # CONFIG_CHELSIO_T1 is not set > # CONFIG_IXGB is not set > # CONFIG_S2IO is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > # CONFIG_NET_FC is not set > # CONFIG_SHAPER is not set > # CONFIG_NETCONSOLE is not set > # CONFIG_NETPOLL is not set > # CONFIG_NET_POLL_CONTROLLER is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > CONFIG_INPUT_EVDEV=y > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_LKKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=y > # CONFIG_MOUSE_SERIAL is not set > # CONFIG_MOUSE_VSXXXAA is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > > # > # Hardware I/O ports > # > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > # CONFIG_SERIO_SERPORT is not set > # CONFIG_SERIO_CT82C710 is not set > # CONFIG_SERIO_PCIPS2 is not set > CONFIG_SERIO_LIBPS2=y > # CONFIG_SERIO_RAW is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > # CONFIG_SERIAL_8250_ACPI is not set > CONFIG_SERIAL_8250_NR_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > # CONFIG_SERIAL_JSM is not set > CONFIG_UNIX98_PTYS=y > CONFIG_LEGACY_PTYS=y > CONFIG_LEGACY_PTY_COUNT=256 > > # > # IPMI > # > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > CONFIG_HW_RANDOM=y > # CONFIG_NVRAM is not set > CONFIG_RTC=y > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > > # > # Ftape, the floppy tape device driver > # > CONFIG_AGP=y > CONFIG_AGP_AMD64=y > # CONFIG_AGP_INTEL is not set > # CONFIG_DRM is not set > # CONFIG_MWAVE is not set > CONFIG_RAW_DRIVER=y > CONFIG_HPET=y > # CONFIG_HPET_RTC_IRQ is not set > CONFIG_HPET_MMAP=y > CONFIG_MAX_RAW_DEVS=256 > # CONFIG_HANGCHECK_TIMER is not set > > # > # TPM devices > # > # CONFIG_TCG_TPM is not set > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # Dallas's 1-wire bus > # > # CONFIG_W1 is not set > > # > # Hardware Monitoring support > # > CONFIG_HWMON=y > # CONFIG_HWMON_VID is not set > # CONFIG_SENSORS_HDAPS is not set > # CONFIG_HWMON_DEBUG_CHIP is not set > > # > # Misc devices > # > # CONFIG_IBM_ASM is not set > > # > # Multimedia Capabilities Port drivers > # > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # Digital Video Broadcasting Devices > # > # CONFIG_DVB is not set > > # > # Graphics support > # > CONFIG_FB=m > CONFIG_FB_CFB_FILLRECT=m > CONFIG_FB_CFB_COPYAREA=m > CONFIG_FB_CFB_IMAGEBLIT=m > CONFIG_FB_SOFT_CURSOR=m > # CONFIG_FB_MACMODES is not set > CONFIG_FB_MODE_HELPERS=y > # CONFIG_FB_TILEBLITTING is not set > # CONFIG_FB_CIRRUS is not set > # CONFIG_FB_PM2 is not set > # CONFIG_FB_CYBER2000 is not set > # CONFIG_FB_ARC is not set > # CONFIG_FB_VGA16 is not set > CONFIG_VIDEO_SELECT=y > # CONFIG_FB_HGA is not set > CONFIG_FB_NVIDIA=m > # CONFIG_FB_NVIDIA_I2C is not set > # CONFIG_FB_RIVA is not set > # CONFIG_FB_MATROX is not set > # CONFIG_FB_RADEON_OLD is not set > # CONFIG_FB_RADEON is not set > # CONFIG_FB_ATY128 is not set > # CONFIG_FB_ATY is not set > # CONFIG_FB_SAVAGE is not set > # CONFIG_FB_SIS is not set > # CONFIG_FB_NEOMAGIC is not set > # CONFIG_FB_KYRO is not set > # CONFIG_FB_3DFX is not set > # CONFIG_FB_VOODOO1 is not set > # CONFIG_FB_CYBLA is not set > # CONFIG_FB_TRIDENT is not set > # CONFIG_FB_GEODE is not set > # CONFIG_FB_S1D13XXX is not set > # CONFIG_FB_VIRTUAL is not set > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > CONFIG_DUMMY_CONSOLE=y > CONFIG_FRAMEBUFFER_CONSOLE=m > # CONFIG_FONTS is not set > CONFIG_FONT_8x8=y > CONFIG_FONT_8x16=y > > # > # Logo configuration > # > # CONFIG_LOGO is not set > # CONFIG_BACKLIGHT_LCD_SUPPORT is not set > > # > # Speakup console speech > # > # CONFIG_SPEAKUP is not set > CONFIG_SPEAKUP_DEFAULT="none" > > # > # Sound > # > CONFIG_SOUND=y > > # > # Advanced Linux Sound Architecture > # > CONFIG_SND=m > CONFIG_SND_TIMER=m > CONFIG_SND_PCM=m > CONFIG_SND_RAWMIDI=m > CONFIG_SND_SEQUENCER=m > # CONFIG_SND_SEQ_DUMMY is not set > CONFIG_SND_OSSEMUL=y > CONFIG_SND_MIXER_OSS=m > CONFIG_SND_PCM_OSS=m > CONFIG_SND_SEQUENCER_OSS=y > # CONFIG_SND_RTCTIMER is not set > # CONFIG_SND_VERBOSE_PRINTK is not set > # CONFIG_SND_DEBUG is not set > > # > # Generic devices > # > # CONFIG_SND_DUMMY is not set > # CONFIG_SND_VIRMIDI is not set > # CONFIG_SND_MTPAV is not set > # CONFIG_SND_SERIAL_U16550 is not set > # CONFIG_SND_MPU401 is not set > CONFIG_SND_AC97_CODEC=m > CONFIG_SND_AC97_BUS=m > > # > # PCI devices > # > # CONFIG_SND_ALI5451 is not set > # CONFIG_SND_ATIIXP is not set > # CONFIG_SND_ATIIXP_MODEM is not set > # CONFIG_SND_AU8810 is not set > # CONFIG_SND_AU8820 is not set > # CONFIG_SND_AU8830 is not set > # CONFIG_SND_AZT3328 is not set > # CONFIG_SND_BT87X is not set > # CONFIG_SND_CS46XX is not set > # CONFIG_SND_CS4281 is not set > # CONFIG_SND_EMU10K1 is not set > # CONFIG_SND_EMU10K1X is not set > # CONFIG_SND_CA0106 is not set > # CONFIG_SND_KORG1212 is not set > # CONFIG_SND_MIXART is not set > # CONFIG_SND_NM256 is not set > # CONFIG_SND_RME32 is not set > # CONFIG_SND_RME96 is not set > # CONFIG_SND_RME9652 is not set > # CONFIG_SND_HDSP is not set > # CONFIG_SND_HDSPM is not set > # CONFIG_SND_TRIDENT is not set > # CONFIG_SND_YMFPCI is not set > # CONFIG_SND_AD1889 is not set > # CONFIG_SND_ALS4000 is not set > # CONFIG_SND_CMIPCI is not set > CONFIG_SND_ENS1370=m > CONFIG_SND_ENS1371=m > # CONFIG_SND_ES1938 is not set > # CONFIG_SND_ES1968 is not set > # CONFIG_SND_MAESTRO3 is not set > # CONFIG_SND_FM801 is not set > # CONFIG_SND_ICE1712 is not set > # CONFIG_SND_ICE1724 is not set > # CONFIG_SND_INTEL8X0 is not set > # CONFIG_SND_INTEL8X0M is not set > # CONFIG_SND_SONICVIBES is not set > # CONFIG_SND_VIA82XX is not set > # CONFIG_SND_VIA82XX_MODEM is not set > # CONFIG_SND_VX222 is not set > # CONFIG_SND_HDA_INTEL is not set > > # > # USB devices > # > # CONFIG_SND_USB_AUDIO is not set > # CONFIG_SND_USB_USX2Y is not set > > # > # Open Sound System > # > # CONFIG_SOUND_PRIME is not set > > # > # USB support > # > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB=y > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_DYNAMIC_MINORS is not set > # CONFIG_USB_SUSPEND is not set > # CONFIG_USB_OTG is not set > > # > # USB Host Controller Drivers > # > CONFIG_USB_EHCI_HCD=y > # CONFIG_USB_EHCI_SPLIT_ISO is not set > # CONFIG_USB_EHCI_ROOT_HUB_TT is not set > # CONFIG_USB_ISP116X_HCD is not set > CONFIG_USB_OHCI_HCD=y > # CONFIG_USB_OHCI_BIG_ENDIAN is not set > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > CONFIG_USB_UHCI_HCD=y > # CONFIG_USB_SL811_HCD is not set > > # > # USB Device Class drivers > # > # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set > # CONFIG_USB_BLUETOOTH_TTY is not set > # CONFIG_USB_ACM is not set > CONFIG_USB_PRINTER=y > > # > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be > needed; see USB_STORAGE Help for more information > # > CONFIG_USB_STORAGE=y > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > # CONFIG_USB_STORAGE_ISD200 is not set > # CONFIG_USB_STORAGE_DPCM is not set > # CONFIG_USB_STORAGE_USBAT is not set > # CONFIG_USB_STORAGE_SDDR09 is not set > # CONFIG_USB_STORAGE_SDDR55 is not set > # CONFIG_USB_STORAGE_JUMPSHOT is not set > # CONFIG_USB_STORAGE_ONETOUCH is not set > > # > # USB Input Devices > # > CONFIG_USB_HID=y > CONFIG_USB_HIDINPUT=y > # CONFIG_HID_FF is not set > CONFIG_USB_HIDDEV=y > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_ACECAD is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_MTOUCH is not set > # CONFIG_USB_ITMTOUCH is not set > # CONFIG_USB_EGALAX is not set > # CONFIG_USB_YEALINK is not set > # CONFIG_USB_XPAD is not set > # CONFIG_USB_ATI_REMOTE is not set > # CONFIG_USB_KEYSPAN_REMOTE is not set > # CONFIG_USB_APPLETOUCH is not set > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_MICROTEK is not set > > # > # USB Multimedia devices > # > # CONFIG_USB_DABUSB is not set > > # > # Video4Linux support is needed for USB Multimedia device support > # > > # > # USB Network Adapters > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET is not set > CONFIG_USB_MON=y > > # > # USB port drivers > # > > # > # USB Serial Converter support > # > # CONFIG_USB_SERIAL is not set > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_CYTHERM is not set > # CONFIG_USB_PHIDGETKIT is not set > # CONFIG_USB_PHIDGETSERVO is not set > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_SISUSBVGA is not set > # CONFIG_USB_LD is not set > # CONFIG_USB_TEST is not set > > # > # USB DSL modem support > # > > # > # USB Gadget Support > # > # CONFIG_USB_GADGET is not set > > # > # MMC/SD Card support > # > # CONFIG_MMC is not set > > # > # InfiniBand support > # > # CONFIG_INFINIBAND is not set > > # > # SN Devices > # > > # > # Firmware Drivers > # > # CONFIG_EDD is not set > # CONFIG_DELL_RBU is not set > # CONFIG_DCDBAS is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > CONFIG_EXT2_FS_XATTR=y > CONFIG_EXT2_FS_POSIX_ACL=y > # CONFIG_EXT2_FS_SECURITY is not set > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=y > CONFIG_EXT3_FS_XATTR=y > CONFIG_EXT3_FS_POSIX_ACL=y > # CONFIG_EXT3_FS_SECURITY is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > CONFIG_FS_MBCACHE=y > CONFIG_REISERFS_FS=y > # CONFIG_REISERFS_CHECK is not set > # CONFIG_REISERFS_PROC_INFO is not set > CONFIG_REISERFS_FS_XATTR=y > CONFIG_REISERFS_FS_POSIX_ACL=y > # CONFIG_REISERFS_FS_SECURITY is not set > # CONFIG_JFS_FS is not set > CONFIG_FS_POSIX_ACL=y > # CONFIG_XFS_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_INOTIFY=y > # CONFIG_QUOTA is not set > CONFIG_DNOTIFY=y > CONFIG_AUTOFS_FS=y > # CONFIG_AUTOFS4_FS is not set > # CONFIG_FUSE_FS is not set > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=y > CONFIG_JOLIET=y > # CONFIG_ZISOFS is not set > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=y > CONFIG_VFAT_FS=y > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" > # CONFIG_NTFS_FS is not set > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > CONFIG_HUGETLBFS=y > CONFIG_HUGETLB_PAGE=y > CONFIG_RAMFS=y > # CONFIG_RELAYFS_FS is not set > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > # CONFIG_CRAMFS is not set > # CONFIG_SQUASHFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > CONFIG_NFS_FS=m > # CONFIG_NFS_V3 is not set > # CONFIG_NFS_V4 is not set > # CONFIG_NFS_DIRECTIO is not set > CONFIG_NFSD=m > # CONFIG_NFSD_V3 is not set > CONFIG_NFSD_TCP=y > CONFIG_LOCKD=m > CONFIG_EXPORTFS=m > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=m > # CONFIG_RPCSEC_GSS_KRB5 is not set > # CONFIG_RPCSEC_GSS_SPKM3 is not set > CONFIG_SMB_FS=m > CONFIG_SMB_NLS_DEFAULT=y > CONFIG_SMB_NLS_REMOTE="cp437" > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > # CONFIG_9P_FS is not set > > # > # Partition Types > # > CONFIG_PARTITION_ADVANCED=y > # CONFIG_ACORN_PARTITION is not set > # CONFIG_OSF_PARTITION is not set > # CONFIG_AMIGA_PARTITION is not set > # CONFIG_ATARI_PARTITION is not set > # CONFIG_MAC_PARTITION is not set > CONFIG_MSDOS_PARTITION=y > # CONFIG_BSD_DISKLABEL is not set > # CONFIG_MINIX_SUBPARTITION is not set > # CONFIG_SOLARIS_X86_PARTITION is not set > # CONFIG_UNIXWARE_DISKLABEL is not set > # CONFIG_LDM_PARTITION is not set > # CONFIG_SGI_PARTITION is not set > # CONFIG_ULTRIX_PARTITION is not set > # CONFIG_SUN_PARTITION is not set > # CONFIG_EFI_PARTITION is not set > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="iso8859-1" > CONFIG_NLS_CODEPAGE_437=y > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > CONFIG_NLS_ASCII=y > CONFIG_NLS_ISO8859_1=y > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > CONFIG_NLS_ISO8859_15=y > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > CONFIG_NLS_UTF8=y > > # > # Profiling support > # > # CONFIG_PROFILING is not set > > # > # Kernel hacking > # > # CONFIG_PRINTK_TIME is not set > CONFIG_DEBUG_KERNEL=y > CONFIG_MAGIC_SYSRQ=y > CONFIG_LOG_BUF_SHIFT=18 > CONFIG_DETECT_SOFTLOCKUP=y > # CONFIG_SCHEDSTATS is not set > # CONFIG_DEBUG_SLAB is not set > # CONFIG_DEBUG_SPINLOCK is not set > # CONFIG_DEBUG_SPINLOCK_SLEEP is not set > # CONFIG_DEBUG_KOBJECT is not set > # CONFIG_DEBUG_INFO is not set > CONFIG_DEBUG_FS=y > # CONFIG_FRAME_POINTER is not set > CONFIG_INIT_DEBUG=y > # CONFIG_IOMMU_DEBUG is not set > CONFIG_KPROBES=y > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > # CONFIG_CRYPTO is not set > > # > # Hardware crypto devices > # > > # > # Library routines > # > # CONFIG_CRC_CCITT is not set > # CONFIG_CRC16 is not set > CONFIG_CRC32=y > # CONFIG_LIBCRC32C is not set > > ----- end of .config ----- > > > > > > > > > Drake Donahue escreveu: > >> the hard drive is in fact pata and not sata or scsi? >> linux file systems were compiled into the kernel to support the file >> systems on the >> partition(s)? --- what is in your fstab??? >> you installed/have one windows one linux one swap partitions? >> or >> you installed/have one windows/ one linux boot/ one linux root/ one swap >> partitions? >> or >> ??? >> >> Suggest you boot the install cd >> >> mount /dev/hda2 /mnt/gentoo ---this will report the file system used >> ls -l /mnt/gentoo >> >> determine whether it is a root or a boot directory. >> >> ls -l /mnt/gentoo/boot >> >> should contain file: bzImage-2.6.14 which should be exact spelling of >> your kernel name if grub.conf is correct what kernel install method >> did you use? my kernel names always look like kernel-2.6.13-r5 after >> following the handbook >> >> suggest delete: >> >> root (hd0,1) >> setup (hd0) >> >> from grub.conf >> >> ----- Original Message ----- From: "Felipe Ribeiro" <felipernb@×××××.com> >> To: <gentoo-amd64@l.g.o> >> Sent: Sunday, December 11, 2005 8:02 PM >> Subject: [gentoo-amd64] Re: Kernel panic - not syncing: VFS: Unable to >> mount root fs on unknown block(2,0) >> >> >>> Hi, >>> >>> I've disabled CONFIG_ROOT_NFS and enabled CONFIG_MSDOS_PARTITION but i >>> still have the problem :-( >>> Kernel Panic - not syncing: VFS: Unable to mount root fs on >>> unknown-block(0,0) >>> >>> On 12/11/05, Florian D. <flockmock@×××.at> wrote: >>> >>>> Felipe Ribeiro wrote: >>>> > Root-NFS: No NFS server available giving up. >>>> > VFS: Unable to mount root fs via NFS, trying floppy. >>>> disable CONFIG_ROOT_NFS (-> File systems >>>> -> Network File Systems); you don´t need it unless you have >>>> a diskless terminal or something >>>> >>>> > VFS: Insert root floppy and press ENTER >>>> > end-request: I/O error, dev fd0, sector 0 >>>> > VFS: Cannot open root device hda2 or unknown-block(2,0) >>>> > Please append a correct "root=" boot option. >>>> > Kerenel panic - not syncing: VFS: Unable to mount root fs on >>>> > unknown-block(2,0) >>>> do you have CONFIG_MSDOS_PARTITION enabled? >>>> ( Location: -> File systems -> Partition Types -> Advanced partition >>>> selection) >>>> >>>> cheers, f >>>> -- >>>> gentoo-amd64@g.o mailing list >>>> >>>> >>> >>> -- >>> gentoo-amd64@g.o mailing list >>> >>> >> > > -- > gentoo-amd64@g.o mailing list >
-- gentoo-amd64@g.o mailing list

Replies