1 |
> 550 /should/ be enough, correct. However, as Nuitari asks, what brand, |
2 |
> and is it UL/CE certified or not? If not, as I said, the rating's worth |
3 |
> less than the sticker it's printed on. |
4 |
|
5 |
550w doesn't mean much actually. It is the total power output it is |
6 |
capable of, under ideal conditions. |
7 |
|
8 |
You have to see how much each individual voltage can take amp wise. |
9 |
|
10 |
In the time of 300w power supplies, there were a lot of cheap ones that |
11 |
had a 10A 12v line. 10a * 10v = 120watt, which is definitely not what |
12 |
someone would expect from a 300w power supply. |
13 |
|
14 |
Then came the 350w ones with the same rating for 12v, so no gain there. |
15 |
Better ones had at least 15A for 12V as the CPUs started using much more |
16 |
power. |
17 |
|
18 |
I am currently using an Antec SmartPower 2.0 450W power supply. |
19 |
|
20 |
It has these ratings: |
21 |
+3.3V * 32A = 105.6W |
22 |
+5V * 30A = 150W |
23 |
+12V1 * 15A = 180W |
24 |
+12V2 * 17A = 204W |
25 |
|
26 |
According to the documentation, the combined output of these cannot exceed |
27 |
440Watts (there are some watts for +5V standby and -12V). |
28 |
|
29 |
+12V1 is what does to the motherboard and peripherals and +12V2 goes to |
30 |
the processor(s). |
31 |
|
32 |
You should calculate how much you are using power wise with all of your |
33 |
peripherals to see if your power supply is strong enough. |
34 |
-- |
35 |
gentoo-amd64@g.o mailing list |