1 |
> For point of power reference in relation to drive usage, my Seagate SATAs |
2 |
> say maximum spin-up draw is 2.8 amp @ 12 volt, so roughly 11 amp if all |
3 |
> four are spun up at once, 14 if the fifth drive is assumed to have |
4 |
> similar power requirements. Operational draw is of course much lower, .85 |
5 |
> amp on the 5 volt, .79 amp on the 12 volt, according to specs, so 4.3 amp |
6 |
> 5 volt, 4 amp 12 volt draw, five disk operational. Say 5 amp total |
7 |
> for each voltage, 5 and 12. |
8 |
|
9 |
Yes, although that a lot of factory default settings for scsi hard drives |
10 |
have a Delayed start option of 10s * scsi ID and / or until the start |
11 |
command is received so that the power supply doesn't get hammered. |
12 |
-- |
13 |
gentoo-amd64@g.o mailing list |