1 |
Still don't see any problems so far. Does your "lspci" report any "PCI |
2 |
bridge" info? If not there's small tool "lshw" which report quite |
3 |
nicely the hardware profile. If you don't have it installed just do |
4 |
"emerge lshw" and it takes just a while to install. Would you also run |
5 |
it and show me the "pci" part of the output? |
6 |
|
7 |
|
8 |
On Mon, 01 Nov 2004 14:00:25 -0800, Mark Knecht <mknecht@××××××××××.com> wrote: |
9 |
> Wei Li wrote: |
10 |
> > Mark, |
11 |
> > |
12 |
> > So far I don't see a problem, but would give give me the output of |
13 |
> > "lspci | grep AGP". |
14 |
> |
15 |
> Not very interesting: |
16 |
> |
17 |
> flash mark $ /sbin/lspci | grep AGP |
18 |
> flash mark $ |
19 |
> |
20 |
> A bit better: |
21 |
> |
22 |
> flash root # lspci -v | grep AGP |
23 |
> Capabilities: [a0] AGP version 3.0 |
24 |
> Capabilities: [58] AGP version 3.0 |
25 |
> flash root # |
26 |
> |
27 |
> flash root # lspci -vv | grep AGP |
28 |
> Capabilities: [a0] AGP version 3.0 |
29 |
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ |
30 |
> AGP3+ Rate=x4,x8 |
31 |
> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4 |
32 |
> Capabilities: [58] AGP version 3.0 |
33 |
> Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- |
34 |
> FW+ AGP3+ Rate=x4,x8 |
35 |
> Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4 |
36 |
> flash root # |
37 |
> |
38 |
> Caught using script: |
39 |
> |
40 |
> lspci -vv^M |
41 |
> 0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5833 (rev |
42 |
> 02)^M |
43 |
> Subsystem: ATI Technologies Inc: Unknown device 1234^M |
44 |
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- |
45 |
> ParErr- Stepping- SERR- FastB2B-^M |
46 |
> Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium |
47 |
> >TAbort- <TAbort- <MAbort+ >SERR- <PERR-^M |
48 |
> Latency: 64^M |
49 |
> Region 0: Memory at ea000000 (32-bit, prefetchable)^M |
50 |
> Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=4K]^M |
51 |
> Capabilities: [a0] AGP version 3.0^M |
52 |
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- |
53 |
> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8^M |
54 |
> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- |
55 |
> FW- Rate=x4 |
56 |
> |
57 |
> <SNIP> |
58 |
> |
59 |
> 0000:01:05.0 VGA compatible controller: ATI Technologies Inc RV250 5c61 |
60 |
> [Radeon Mobility 9200 M9+] (rev 01) (prog-if 00 [VGA])^M |
61 |
> Subsystem: Hewlett-Packard Company: Unknown device 006b^M |
62 |
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- |
63 |
> ParErr- Stepping- SERR- FastB2B+^M |
64 |
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium |
65 |
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-^M |
66 |
> Latency: 66 (2000ns min), cache line size 08^M |
67 |
> Interrupt: pin A routed to IRQ 16^M |
68 |
> Region 0: Memory at f0000000 (32-bit, prefetchable)^M |
69 |
> Region 1: I/O ports at 9000 [size=256]^M |
70 |
> Region 2: Memory at e8100000 (32-bit, non-prefetchable) |
71 |
> [size=64K]^M |
72 |
> Capabilities: [58] AGP version 3.0^M |
73 |
> Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- |
74 |
> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8^M |
75 |
> Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- |
76 |
> FW- Rate=x4^M |
77 |
> Capabilities: [50] Power Management version 2^M |
78 |
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA |
79 |
> |
80 |
> PME(D0-,D1-,D2-,D3hot-,D3cold-)^M |
81 |
> Status: D0 PME-Enable- DSel=0 DScale=0 PME- |
82 |
> |
83 |
> So, the host bridge and the VGA controller. That makes sense. |
84 |
> |
85 |
> How about the need to recompile everything since I've had glibc updates, |
86 |
> etc. |
87 |
> |
88 |
> Also, I'm attaching my xorg.config file for youto look at. |
89 |
> |
90 |
> thanks for your help!! |
91 |
> |
92 |
> - Mark |
93 |
> |
94 |
> |
95 |
> |
96 |
> |
97 |
> > |
98 |
> > |
99 |
> > |
100 |
> > On Mon, 01 Nov 2004 13:24:45 -0800, Mark Knecht <mknecht@××××××××××.com> wrote: |
101 |
> > |
102 |
> >>Wei Li wrote: |
103 |
> >> |
104 |
> >>>Mark, |
105 |
> >>> |
106 |
> >>>I'd like to know a bit details of your system: |
107 |
> >>>- what's the kernel version? |
108 |
> >> |
109 |
> >>flash mark $ uname -a |
110 |
> >>Linux flash 2.6.9-rc2-mm4-VP-S7-UMP-noACPI #8 Tue Oct 19 18:51:12 PDT |
111 |
> >>2004 i686 Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz GenuineIntel |
112 |
> >>GNU/Linux |
113 |
> >>flash mark $ |
114 |
> >> |
115 |
> >>This kernel was customized for low-latency audio work. |
116 |
> >> |
117 |
> >> |
118 |
> >>>- what's your ATI card model? |
119 |
> >> |
120 |
> >>0000:01:05.0 VGA compatible controller: ATI Technologies Inc RV250 5c61 |
121 |
> >>[Radeon Mobility 9200 M9+] (rev 01) (prog-if 00 [VGA]) |
122 |
> >>Subsystem: Hewlett-Packard Company: Unknown device 006b |
123 |
> >>Flags: bus master, fast Back2Back, 66Mhz, medium devsel, latency 66, IRQ 16 |
124 |
> >>Memory at f0000000 (32-bit, prefetchable) |
125 |
> >>I/O ports at 9000 [size=256] |
126 |
> >>Memory at e8100000 (32-bit, non-prefetchable) [size=64K] |
127 |
> >>Capabilities: <available only to root> |
128 |
> >> |
129 |
> >> |
130 |
> >>>- do you use XFree86 or Xorg? |
131 |
> >> |
132 |
> >>Xorg - as I stated earlier, these freeze problems only started when I |
133 |
> >>upgraded to xorg-6.8. Prior to that I ran xorg-6.7.X for 4-5 months and |
134 |
> >>never had a single problem. |
135 |
> >> |
136 |
> >>flash root # emerge -pv xorg-x11 |
137 |
> >> |
138 |
> >>These are the packages that I would merge, in order: |
139 |
> >> |
140 |
> >>Calculating dependencies ...done! |
141 |
> >>[ebuild R ] x11-base/xorg-x11-6.8.0-r1 -3dfx -3dnow +bitmap-fonts |
142 |
> >>-cjk -debug -dlloader -dmx -doc -hardened -insecure-drivers -ipv6 +mmx |
143 |
> >>+nls +pam -sdk +sse -static -xprint* 0 kB |
144 |
> >> |
145 |
> >>Total size of downloads: 0 kB |
146 |
> >> |
147 |
> >>flash root # |
148 |
> >> |
149 |
> >> |
150 |
> >> |
151 |
> >>> |
152 |
> >>> |
153 |
> >>>On Mon, 01 Nov 2004 11:42:05 -0800, Mark Knecht <mknecht@××××××××××.com> wrote: |
154 |
> >>> |
155 |
> >>> |
156 |
> >>>>Wei Li, |
157 |
> >>>> Actually I think you are probably right, but in terms of knowing |
158 |
> >>>>*how* to check my options it seems to be beyond me. Don't even begin to |
159 |
> >>>>know where to really look and don't know how to consider what's right |
160 |
> >>>>and what's wrong. Here are a few things I see: |
161 |
> >>>> |
162 |
> >>>>From Device Drivers->Graphics Support: |
163 |
> >>>> |
164 |
> >>>> [*] Support for frame buffer devices |
165 |
> >>>><SNIP> |
166 |
> >>>><M> VGA 16-color graphics support |
167 |
> >>>>[*] VESA VGA graphics support |
168 |
> >>>><SNIP> |
169 |
> >>>><M> ATI Radeon display support |
170 |
> >>>>[*] DDC/I2C for ATI Radeon support |
171 |
> >>>> |
172 |
> >>>>From Character Devices: |
173 |
> >>>> |
174 |
> >>>><*> /dev/agpgart (AGP Support) |
175 |
> >>>><*> ATI chipset support |
176 |
> >>>> |
177 |
> >>>>[*] Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) |
178 |
> >>>><M> ATI Radeon |
179 |
> >>>> |
180 |
> >>>>Those are the obvious ones. They could be wrong. I find the instructions |
181 |
> >>>>for all of this stuff pretty confusing. |
182 |
> >>>> |
183 |
> >>>>flash linux # qpkg -I | grep ati |
184 |
> >>>>app-emulation/dosemu * |
185 |
> >>>>media-video/ati-drivers * |
186 |
> >>>>media-video/ati-drivers-extra * |
187 |
> >>>>net-print/foomatic * |
188 |
> >>>>net-print/foomatic-db * |
189 |
> >>>>net-print/foomatic-db-engine * |
190 |
> >>>>net-print/foomatic-filters * |
191 |
> >>>>flash linux # |
192 |
> >>>> |
193 |
> >>>>flash linux # qpkg -I | grep radeon |
194 |
> >>>>flash linux # |
195 |
> >>>> |
196 |
> >>>>If you can see obvious messed up stuff here please let my know. I've had |
197 |
> >>>>three crashes this morning. (Messing around with Wine makes the crash |
198 |
> >>>>way more likely to occur.) |
199 |
> >>>> |
200 |
> >>>>Thanks, |
201 |
> >>>>Mark |
202 |
> >>>> |
203 |
> >>>> |
204 |
> >>>> |
205 |
> >>>>Wei Li wrote: |
206 |
> >>>> |
207 |
> >>>> |
208 |
> >>>>>I used to have the X freezing problem and it turned out that the |
209 |
> >>>>>problem was caused by inproper configuration of AGP options inthe |
210 |
> >>>>>kernel. Check your AGP options. |
211 |
> >>>>> |
212 |
> >>>>> |
213 |
> >>>>>On Mon, 01 Nov 2004 10:51:36 -0800, Mark Knecht <mknecht@××××××××××.com> wrote: |
214 |
> >>>>> |
215 |
> >>>>> |
216 |
> >>>>> |
217 |
> >>>>>>Luke-Jr wrote: |
218 |
> >>>>>> |
219 |
> >>>>>> |
220 |
> >>>>>> |
221 |
> >>>>>>>On Friday 29 October 2004 7:57 pm, Robert Zwerus wrote: |
222 |
> >>>>>>> |
223 |
> >>>>>>> |
224 |
> >>>>>>> |
225 |
> >>>>>>> |
226 |
> >>>>>>>>Mark Knecht wrote: |
227 |
> >>>>>>>> |
228 |
> >>>>>>>> |
229 |
> >>>>>>>> |
230 |
> >>>>>>>> |
231 |
> >>>>>>>>>My crashes are not complete. I am ssh'ed into the machine and can |
232 |
> >>>>>>>>>actually reboot it cleanly. The crash is apparently only X for me. |
233 |
> >>>>>>>> |
234 |
> >>>>>>>>Try entering these commands in the SSH session: |
235 |
> >>>>>>>>export DISPLAY=:0 |
236 |
> >>>>>>>>startx |
237 |
> >>>>>>>> |
238 |
> >>>>>>>>Maybe your graphics chip just needs to be reset, startx will take care |
239 |
> >>>>>>>>of that. |
240 |
> >>>>>>> |
241 |
> >>>>>>> |
242 |
> >>>>>>>startx will take care of the DISPLAY variable also. In normal situations, it's |
243 |
> >>>>>>>fairly rare that you ever need to set it manually. |
244 |
> >>>>>>>Anyway, if it's the same issue I've encountered (which it seems to be), and |
245 |
> >>>>>>>IIRC, this won't help anything. |
246 |
> >>>>>> |
247 |
> >>>>>>I had another crash this morning. Screen, keyboard and mouse were hung. |
248 |
> >>>>>>(DRI is still installed - possibly incorrectly) |
249 |
> >>>>>> |
250 |
> >>>>>>I was able to log in remotely, su to root, rmmod radeon, modprobe radeon |
251 |
> >>>>>>and startx as root. The screen came back up. I then killed my new X |
252 |
> >>>>>>environment and the system came back alive. |
253 |
> >>>>>> |
254 |
> >>>>>>This isn't a good solution as I do not always have a remote system to do |
255 |
> >>>>>>this from, but at least it gets me back in control without a power cycle |
256 |
> >>>>>>and fsck. |
257 |
> >>>>>> |
258 |
> >>>>>>Thanks, |
259 |
> >>>>>>Mark |
260 |
> >>>>>> |
261 |
> >>>>>>-- |
262 |
> >>>>>>gentoo-desktop@g.o mailing list |
263 |
> >>>>>> |
264 |
> >>>>>> |
265 |
> >>>>> |
266 |
> >>>>> |
267 |
> >>>>> |
268 |
> >>> |
269 |
> >> |
270 |
> > |
271 |
> > |
272 |
> |
273 |
> |
274 |
> |
275 |
|
276 |
|
277 |
-- |
278 |
Wei |
279 |
|
280 |
-- |
281 |
gentoo-desktop@g.o mailing list |