| 1 |
Wei Li wrote: |
| 2 |
> Still don't see any problems so far. Does your "lspci" report any "PCI |
| 3 |
> bridge" info? If not there's small tool "lshw" which report quite |
| 4 |
> nicely the hardware profile. If you don't have it installed just do |
| 5 |
> "emerge lshw" and it takes just a while to install. Would you also run |
| 6 |
> it and show me the "pci" part of the output? |
| 7 |
> |
| 8 |
> |
| 9 |
|
| 10 |
I hope this is the whole section you need: |
| 11 |
|
| 12 |
*-pci^M |
| 13 |
description: Host bridge^M |
| 14 |
product: ATI Technologies Inc^M |
| 15 |
vendor: ATI Technologies Inc^M |
| 16 |
physical id: ea000000^M |
| 17 |
bus info: pci@00:00.0^M |
| 18 |
logical name: /dev/fb0^M |
| 19 |
version: 02^M |
| 20 |
clock: 66MHz^M |
| 21 |
capabilities: fb^M |
| 22 |
configuration: depth=8 frequency=59.91Hz mode=1280x800 |
| 23 |
visual=pseudocolor xres=1280 yres=800^M |
| 24 |
resources: iomemory:ea000000-ebffffff |
| 25 |
iomemory:e8000000-e8000fff^M |
| 26 |
*-pci:0^M |
| 27 |
description: PCI bridge (Normal decode)^M |
| 28 |
product: ATI Technologies Inc^M |
| 29 |
vendor: ATI Technologies Inc^M |
| 30 |
physical id: 1^M |
| 31 |
bus info: pci@00:01.0^M |
| 32 |
version: 00^M |
| 33 |
clock: 66MHz^M |
| 34 |
capabilities: pci normal_decode bus_master^M |
| 35 |
*-display^M |
| 36 |
description: VGA compatible controller (VGA)^M |
| 37 |
product: RV250 5c61 [Radeon Mobility 9200 M9+]^M |
| 38 |
vendor: ATI Technologies Inc^M |
| 39 |
physical id: 5^M |
| 40 |
bus info: pci@01:05.0^M |
| 41 |
version: 01^M |
| 42 |
size: 128MB^M |
| 43 |
clock: 66MHz^M |
| 44 |
capabilities: vga bus_master cap_list^M |
| 45 |
configuration: driver=radeonfb^M |
| 46 |
resources: iomemory:f0000000-f7ffffff ioport:9000-90ff |
| 47 |
iomemory:e8100000-e810ffff irq:16^M |
| 48 |
|
| 49 |
-- |
| 50 |
gentoo-desktop@g.o mailing list |
Archives