Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-doc-cvs
Navigation:
Lists: gentoo-doc-cvs: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: gentoo-doc-cvs@g.o
From: "Sven Vermeulen (swift)" <swift@g.o>
Subject: gentoo commit in xml/htdocs/doc/en: altinstall.xml faq.xml gentoo-x86-tipsntricks.xml grub-error-guide.xml lvm2.xml migration-to-2.6.xml udev-guide.xml usb-guide.xml xen-guide.xml
Date: Mon, 26 Dec 2011 15:22:40 +0000 (UTC)
swift       11/12/26 15:22:40

  Modified:             altinstall.xml faq.xml gentoo-x86-tipsntricks.xml
                        grub-error-guide.xml lvm2.xml migration-to-2.6.xml
                        udev-guide.xml usb-guide.xml xen-guide.xml
  Log:
  Fix bug #384117 - Refer to the more recent SATA device scheme instead of older IDE

Revision  Changes    Path
1.84                 xml/htdocs/doc/en/altinstall.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/altinstall.xml?rev=1.84&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/altinstall.xml?rev=1.84&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/altinstall.xml?r1=1.83&r2=1.84

Index: altinstall.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/altinstall.xml,v
retrieving revision 1.83
retrieving revision 1.84
diff -u -r1.83 -r1.84
--- altinstall.xml	30 Oct 2011 11:56:08 -0000	1.83
+++ altinstall.xml	26 Dec 2011 15:22:40 -0000	1.84
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding="UTF-8"?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/altinstall.xml,v 1.83 2011/10/30 11:56:08 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/altinstall.xml,v 1.84 2011/12/26 15:22:40 swift Exp $ -->
 
 <guide>
 <title>The Gentoo Linux alternative installation method HOWTO</title>
@@ -58,8 +58,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>8</version>
-<date>2011-10-30</date>
+<version>9</version>
+<date>2011-12-26</date>
 
 <chapter>
 <title>About this document</title>
@@ -429,14 +429,14 @@
 Installation Instructions from an existing installation. Follow the standard
 install procedure as explained in the <uri link="/doc/en/handbook/">Gentoo
 Handbook</uri> BUT with the following differences:
-When you mount the file system, do the following (where <path>hdaX</path> is
+When you mount the file system, do the following (where <path>sdaX</path> is
 the partition where you created the <path>/diskless</path> directory). You do
 not need to mount any other partitions as all of the files will reside in the
 <path>/diskless/eta</path> directory.
 </p>
 
 <pre caption="Mounting the filesystem">
-#<i> mount /dev/hdaX /mnt/gentoo</i>
+#<i> mount /dev/sdaX /mnt/gentoo</i>
 </pre>
 
 <p>
@@ -595,19 +595,19 @@
 
 <pre caption="Filesystem information">
 # <i>mount</i>
-/dev/hdb2 on / type ext3 (rw)
+/dev/sdb2 on / type ext3 (rw)
 none on /proc type proc (rw)
 none on /dev/pts type devpts (rw,gid=5,mode=620)
 none on /dev/shm type tmpfs (rw,nodev,nosuid,noexec)
 # <i>df -h </i>
 Filesystem           Size Used Avail Use% Mounted on
-/dev/hdb2            4.0G 1.9G  2.4G  82% /
+/dev/sdb2            4.0G 1.9G  2.4G  82% /
 none                  38M    0   38M   0% /dev/shm
 </pre>
 
 <p>
 As we can see, the partition mounted as <path>/</path> named
-<path>/dev/hdb2</path> has 2.4 gigabytes free. In my case, I think I will
+<path>/dev/sdb2</path> has 2.4 gigabytes free. In my case, I think I will
 resize it as to leave 400Megs free of space, therefore allocating 2 gigabytes
 for Gentoo. Not bad, I could have quite some stuff installed. However, I think
 that even one gigabyte is enough for most users. So let's partition this thing!
@@ -699,14 +699,14 @@
 resize your partition. Once this lenghty process done, we are ready to have the
 real fun, by installing Gentoo. Reboot back into your old Linux system for now.
 The drive you wish to operate on is the drive containing the partition we want
-to resize. For example, if we want to resize /dev/hda3, the drive is /dev/hda.
+to resize. For example, if we want to resize /dev/sda3, the drive is /dev/sda.
 </p>
 
 <pre caption="Commands to run once logged into mininux system">
 # <i>mount /dev/fd0 /floppy </i>
 # <i>cd /floppy; ./parted [drive you wish to operate on]</i>
 (parted) <i> print </i>
-Disk geometry for /dev/hdb: 0.000-9787.148 megabytes
+Disk geometry for /dev/sdb: 0.000-9787.148 megabytes
 Disk label type: msdos
 Minor    Start       End     Type      Filesystem  Flags
 1          0.031   2953.125  primary   ntfs



1.121                xml/htdocs/doc/en/faq.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/faq.xml?rev=1.121&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/faq.xml?rev=1.121&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/faq.xml?r1=1.120&r2=1.121

Index: faq.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/faq.xml,v
retrieving revision 1.120
retrieving revision 1.121
diff -u -r1.120 -r1.121
--- faq.xml	13 Oct 2011 16:58:14 -0000	1.120
+++ faq.xml	26 Dec 2011 15:22:40 -0000	1.121
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding="UTF-8"?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/faq.xml,v 1.120 2011/10/13 16:58:14 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/faq.xml,v 1.121 2011/12/26 15:22:40 swift Exp $ -->
 
 <guide>
 <title>Gentoo Linux Frequently Asked Questions</title>
@@ -47,8 +47,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>7</version>
-<date>2011-10-13</date>
+<version>8</version>
+<date>2011-12-26</date>
 
 <faqindex>
 <title>Questions</title>
@@ -228,16 +228,16 @@
 <p>
 You don't need to redo every step of the installation, but investigating the
 kernel and all associated steps is necessary. Suppose you have installed Gentoo
-on <path>/dev/hda1</path> (/boot) and <path>/dev/hda3</path> (/) with
-<path>/dev/hda2</path> being the swap space:
+on <path>/dev/sda1</path> (/boot) and <path>/dev/sda3</path> (/) with
+<path>/dev/sda2</path> being the swap space:
 </p>
 
 <pre caption = "Reconfiguring the kernel">
 <comment>Boot from the Install CD and wait until you receive a prompt</comment>
 <comment>We first mount all partitions:</comment>
-# <i>mount /dev/hda3 /mnt/gentoo</i>
-# <i>mount /dev/hda1 /mnt/gentoo/boot</i>
-# <i>swapon /dev/hda2</i>
+# <i>mount /dev/sda3 /mnt/gentoo</i>
+# <i>mount /dev/sda1 /mnt/gentoo/boot</i>
+# <i>swapon /dev/sda2</i>
 # <i>mount -t proc none /mnt/gentoo/proc</i>
 <comment>Then we chroot into our Gentoo environment and configure the kernel:</comment>
 # <i>chroot /mnt/gentoo /bin/bash</i>
@@ -310,8 +310,8 @@
     your brand new CD being burnt.
   </li>
   <li>
-    With cdrecord, you simply type <c>cdrecord dev=/dev/hdc</c> (replace
-    <path>/dev/hdc</path> with your CD-RW drive's device path) followed
+    With cdrecord, you simply type <c>cdrecord dev=/dev/sdc</c> (replace
+    <path>/dev/sdc</path> with your CD-RW drive's device path) followed
     by the path to the ISO file :)
   </li>
   <li>
@@ -405,8 +405,8 @@
 first hard drive and shows a black/blank screen. To handle this, you will have
 to "fool" Windows into believing that it is installed on the first hard drive
 with a little tweak in your boot loader configuration. Please note that in the
-below example, Gentoo is installed on <path>hda</path> (first disk) and Windows
-on <path>hdb</path> (second one). Adjust your config as needed.
+below example, Gentoo is installed on <path>sda</path> (first disk) and Windows
+on <path>sdb</path> (second one). Adjust your config as needed.
 </p>
 
 <pre caption="Example dual boot entry for Windows in grub.conf">
@@ -418,9 +418,9 @@
 </pre>
 
 <pre caption="Example dual boot entry for Windows in lilo.conf">
-other=/dev/hdb1
+other=/dev/sdb1
      label=WindowsXP
-     table=/dev/hdb
+     table=/dev/sdb
      map-drive = 0x80
      to = 0x81
      map-drive = 0x81



1.30                 xml/htdocs/doc/en/gentoo-x86-tipsntricks.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoo-x86-tipsntricks.xml?rev=1.30&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoo-x86-tipsntricks.xml?rev=1.30&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoo-x86-tipsntricks.xml?r1=1.29&r2=1.30

Index: gentoo-x86-tipsntricks.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-x86-tipsntricks.xml,v
retrieving revision 1.29
retrieving revision 1.30
diff -u -r1.29 -r1.30
--- gentoo-x86-tipsntricks.xml	11 Sep 2011 08:43:18 -0000	1.29
+++ gentoo-x86-tipsntricks.xml	26 Dec 2011 15:22:40 -0000	1.30
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding="UTF-8"?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-x86-tipsntricks.xml,v 1.29 2011/09/11 08:43:18 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-x86-tipsntricks.xml,v 1.30 2011/12/26 15:22:40 swift Exp $ -->
 
 <guide>
 <title>Gentoo/x86 Installation Tips &amp; Tricks</title>
@@ -26,8 +26,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>4</version>
-<date>2011-09-11</date>
+<version>5</version>
+<date>2011-12-26</date>
 
 <chapter>
 <title>Introduction</title>
@@ -197,7 +197,7 @@
 
 <p>
 Write down the various <path>/dev/ataraid/disc*/*</path> device files that you
-use to install Gentoo on. You will need to substitute the <path>/dev/hda</path>
+use to install Gentoo on. You will need to substitute the <path>/dev/sda</path>
 examples in the installation with this path.
 </p>
 
@@ -411,7 +411,7 @@
 </p>
 
 <pre caption="Checking for disk consistency">
-# <i>mke2fs -j -c /dev/hda3</i>
+# <i>mke2fs -j -c /dev/sda3</i>
 </pre>
 
 </body>



1.18                 xml/htdocs/doc/en/grub-error-guide.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/grub-error-guide.xml?rev=1.18&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/grub-error-guide.xml?rev=1.18&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/grub-error-guide.xml?r1=1.17&r2=1.18

Index: grub-error-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/grub-error-guide.xml,v
retrieving revision 1.17
retrieving revision 1.18
diff -u -r1.17 -r1.18
--- grub-error-guide.xml	4 Sep 2011 17:53:40 -0000	1.17
+++ grub-error-guide.xml	26 Dec 2011 15:22:40 -0000	1.18
@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/grub-error-guide.xml,v 1.17 2011/09/04 17:53:40 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/grub-error-guide.xml,v 1.18 2011/12/26 15:22:40 swift Exp $ -->
 
 <guide>
 <title>Gentoo Grub Error Collection</title>
@@ -23,8 +23,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.9</version>
-<date>2008-01-13</date>
+<version>2</version>
+<date>2011-12-26</date>
 
 <chapter>
 <title>Starting notes</title>
@@ -179,7 +179,7 @@
 
 root (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
-kernel (hd0,0)/boot/kernel-2.4.20 root=/dev/hda3 vga=792
+kernel (hd0,0)/boot/kernel-2.4.20 root=/dev/sda3 vga=792
 
 Error 15: File not found
 Press any key to continue...
@@ -278,7 +278,7 @@
 <comment>(The --root-directory is needed if you are using a separate boot
 partition,
  otherwise you should leave it out)</comment>
-# <i>grub-install --root-directory=/boot /dev/hda</i>
+# <i>grub-install --root-directory=/boot /dev/sda</i>
 </pre>
 
 <p>
@@ -287,8 +287,8 @@
 </p>
 
 <pre caption="Checking a partition for errors">
-<comment>(Make sure the boot partition, /dev/hda1 in this case, is unmounted)</comment>
-# <i>fsck -y /dev/hda1</i>
+<comment>(Make sure the boot partition, /dev/sda1 in this case, is unmounted)</comment>
+# <i>fsck -y /dev/sda1</i>
 </pre>
 
 </body>
@@ -340,7 +340,7 @@
 <body>
 
 <pre caption="Grub Output">
-kernel (hd1,4)/bzImage root=/dev/hdb7
+kernel (hd1,4)/bzImage root=/dev/sdb7
 
 Error 18: Selected cylinder exceeds max supported by BIOS
 </pre>
@@ -519,7 +519,7 @@
 </p>
 
 <pre caption="Mounting and verifying">
-# <i>mount /dev/hda1 /mnt/gentoo/boot</i>
+# <i>mount /dev/sda1 /mnt/gentoo/boot</i>
 # <i>cat /mnt/gentoo/boot/grub/grub.conf</i>
 </pre>
 
@@ -547,7 +547,7 @@
 
 <pre caption="Reinstalling Grub">
 <comment>(Run from within the chrooted environment)</comment>
-# <i>grub-install --root-directory=/boot /dev/hda</i>
+# <i>grub-install --root-directory=/boot /dev/sda</i>
 </pre>
 
 </body>
@@ -566,7 +566,7 @@
 </p>
 
 <pre caption="Grub Output">
-# <i>grub-install --root-directory=/boot /dev/hda</i>
+# <i>grub-install --root-directory=/boot /dev/sda</i>
 Could not find device for /boot/boot: not found or not a block device
 </pre>
 



1.27                 xml/htdocs/doc/en/lvm2.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/lvm2.xml?rev=1.27&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/lvm2.xml?rev=1.27&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/lvm2.xml?r1=1.26&r2=1.27

Index: lvm2.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/lvm2.xml,v
retrieving revision 1.26
retrieving revision 1.27
diff -u -r1.26 -r1.27
--- lvm2.xml	16 Jun 2011 21:35:48 -0000	1.26
+++ lvm2.xml	26 Dec 2011 15:22:40 -0000	1.27
@@ -1,5 +1,5 @@
 <?xml version='1.0' encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/lvm2.xml,v 1.26 2011/06/16 21:35:48 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/lvm2.xml,v 1.27 2011/12/26 15:22:40 swift Exp $ -->
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
 
 <guide>
@@ -24,8 +24,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>3</version>
-<date>2011-06-16</date>
+<version>4</version>
+<date>2011-12-26</date>
 
 <chapter>
 <title>Introduction</title>
@@ -33,7 +33,7 @@
 <body>
 
 <p>
-This guide is based on an example with two IDE hard disks.  It means that you
+This guide is based on an example with two SATA hard disks.  It means that you
 will more than likely need to change the drive, partition names and partition
 sizes to match your own setup and needs.
 </p>
@@ -83,15 +83,15 @@
 <body>
 
 <p>
-Our example system has two IDE hard disks and will be partitioned as follows:
+Our example system has two SATA hard disks and will be partitioned as follows:
 </p>
 
 <ul>
-  <li>/dev/hda1  --  /boot</li>
-  <li>/dev/hda2  --  (swap)</li>
-  <li>/dev/hda3  --  /</li>
-  <li>/dev/hda4  --  Will be used by LVM2</li>
-  <li>/dev/hdb1  --  Will be used by LVM2</li>
+  <li>/dev/sda1  --  /boot</li>
+  <li>/dev/sda2  --  (swap)</li>
+  <li>/dev/sda3  --  /</li>
+  <li>/dev/sda4  --  Will be used by LVM2</li>
+  <li>/dev/sdb1  --  Will be used by LVM2</li>
 </ul>
 
 <impo>
@@ -125,18 +125,18 @@
 </p>
 
 <p>
-Create a small physical <path>/boot</path> partition (hda1). In this example,
+Create a small physical <path>/boot</path> partition (sda1). In this example,
 <path>/boot</path> will be not managed by LVM2. This partition will contain
 your bootloader and your kernel(s).  A 64MB partition should be well enough for
 quite a few kernel generations.
 </p>
 
 <p>
-Create a swap partition (hda2).
+Create a swap partition (sda2).
 </p>
 
 <p>
-Create a / (root) partition (hda3). If you are interested in trying to put your
+Create a / (root) partition (sda3). If you are interested in trying to put your
 root partition under LVM management (which we do not recommend), see the
 resources section at the end of this guide for a link to a mini-howto on how to
 do this. The size of the root partition need not be large if you will keep
@@ -170,8 +170,8 @@
 </note>
 
 <p>
-Create the filesystems on <path>/dev/hda1</path> and <path>/dev/hda3</path>,
-and create and activate the swap on <path>/dev/hda2</path> as described in the
+Create the filesystems on <path>/dev/sda1</path> and <path>/dev/sda3</path>,
+and create and activate the swap on <path>/dev/sda2</path> as described in the
 handbook.
 </p>
 
@@ -197,7 +197,7 @@
 <path>/etc/lvm/lvm.conf</path> to exclude some devices. By default, LVM2 will
 scan all devices, even your CDROM which can generate error messages. In the
 following example, the line that allows scanning of all devices is replaced by
-one that rejects every device but our two IDE disks.
+one that rejects every device but our two SATA disks.
 </p>
 
 <pre caption="Activating LVM">
@@ -206,7 +206,7 @@
 <comment>(Look for the following line)</comment>
     filter = [ "a/.*/" ]
 <comment>(Replace it with the following one to scan
-/dev/hda and /dev/hdb and reject anything else)</comment>
+/dev/sda and /dev/sdb and reject anything else)</comment>
     filter = [ "a|/dev/hd[ab]|", "r/.*/" ]
 <comment>(Save the file and quit nano)</comment>
 # <i>vgscan</i>
@@ -221,11 +221,11 @@
 </p>
 
 <pre caption="Preparing the partitions">
-# <i>pvcreate /dev/hda4 /dev/hdb1</i>
-  No physical volume label read from /dev/hda4
-  Physical volume "/dev/hda4" successfully created
-  No physical volume label read from /dev/hdb1
-  Physical volume "/dev/hdb1" successfully created
+# <i>pvcreate /dev/sda4 /dev/sdb1</i>
+  No physical volume label read from /dev/sda4
+  Physical volume "/dev/sda4" successfully created
+  No physical volume label read from /dev/sdb1
+  Physical volume "/dev/sdb1" successfully created
 </pre>
 
 <p>
@@ -234,20 +234,20 @@
 </p>
 
 <p>
-In our example, <path>/dev/hda1</path>, <path>/dev/hda2</path> and
-<path>/dev/hda3</path> are the <path>/boot</path>, swap and root partitions so
-we need to combine <path>/dev/hda4</path> and <path>/dev/hdb1</path>. It can be
+In our example, <path>/dev/sda1</path>, <path>/dev/sda2</path> and
+<path>/dev/sda3</path> are the <path>/boot</path>, swap and root partitions so
+we need to combine <path>/dev/sda4</path> and <path>/dev/sdb1</path>. It can be
 done with a single command, but, as an example, we will create our volume group
 and extend it.
 </p>
 
 <pre caption="Creating and extending a volume group">
 <comment>(Create a volume group named vg)</comment>
-# <i>vgcreate vg /dev/hda4</i>
+# <i>vgcreate vg /dev/sda4</i>
   /etc/lvm/backup: fsync failed: Invalid argument <comment>(Ignore this warning)</comment>
   Volume group "vg" successfully created
 <comment>(Extending an existing volume group)</comment>
-# <i>vgextend vg /dev/hdb1</i>
+# <i>vgextend vg /dev/sdb1</i>
   /etc/lvm/backup: fsync failed: Invalid argument <comment>(Ignore this warning, again and later as well)</comment>
   Volume group "vg" successfully extended
 </pre>
@@ -402,9 +402,9 @@
 </p>
 
 <pre caption="Extract of /etc/fstab">
-/dev/hda1     /boot   ext3    noauto,noatime 1 2
-/dev/hda2     none    swap    sw             0 0
-/dev/hda3     /       ext3    noatime        0 1
+/dev/sda1     /boot   ext3    noauto,noatime 1 2
+/dev/sda2     none    swap    sw             0 0
+/dev/sda3     /       ext3    noatime        0 1
 # Logical volumes
 /dev/vg/usr   /usr    ext3    noatime        0 2
 /dev/vg/home  /home   ext3    noatime        0 2



1.30                 xml/htdocs/doc/en/migration-to-2.6.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/migration-to-2.6.xml?rev=1.30&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/migration-to-2.6.xml?rev=1.30&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/migration-to-2.6.xml?r1=1.29&r2=1.30

Index: migration-to-2.6.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/migration-to-2.6.xml,v
retrieving revision 1.29
retrieving revision 1.30
diff -u -r1.29 -r1.30
--- migration-to-2.6.xml	11 Sep 2011 08:43:18 -0000	1.29
+++ migration-to-2.6.xml	26 Dec 2011 15:22:40 -0000	1.30
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding="UTF-8"?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/migration-to-2.6.xml,v 1.29 2011/09/11 08:43:18 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/migration-to-2.6.xml,v 1.30 2011/12/26 15:22:40 swift Exp $ -->
 
 <guide>
 <title>The complete Gentoo Linux 2.6 migration guide</title>
@@ -29,8 +29,8 @@
 2.6, devfs to udev, OSS to ALSA, and LVM to LVM2.
 </abstract>
 
-<version>2</version>
-<date>2011-09-11</date>
+<version>3</version>
+<date>2011-12-26</date>
 
 <chapter>
 <title>Introduction</title>
@@ -897,7 +897,7 @@
 <pre caption="Sample GRUB config for genkernel + udev">
 title Gentoo Linux (2.6 kernel)
 root (hd0,0)
-kernel /kernel-2.6.10-gentoo-r4 <i>udev</i> root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda3
+kernel /kernel-2.6.10-gentoo-r4 <i>udev</i> root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3
 initrd /initrd-2.6.10-gentoo-r4
 </pre>
 



1.55                 xml/htdocs/doc/en/udev-guide.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/udev-guide.xml?rev=1.55&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/udev-guide.xml?rev=1.55&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/udev-guide.xml?r1=1.54&r2=1.55

Index: udev-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/udev-guide.xml,v
retrieving revision 1.54
retrieving revision 1.55
diff -u -r1.54 -r1.55
--- udev-guide.xml	11 Sep 2011 08:43:18 -0000	1.54
+++ udev-guide.xml	26 Dec 2011 15:22:40 -0000	1.55
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding="UTF-8"?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/udev-guide.xml,v 1.54 2011/09/11 08:43:18 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/udev-guide.xml,v 1.55 2011/12/26 15:22:40 swift Exp $ -->
 
 <guide>
 <title>Gentoo udev Guide</title>
@@ -23,8 +23,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>9</version>
-<date>2011-09-11</date>
+<version>10</version>
+<date>2011-12-26</date>
 
 <chapter>
 <title>What is udev?</title>
@@ -36,8 +36,8 @@
 When Linux-users talk about the hardware on their system in the vicinity of
 people who believe Linux is some sort of virus or brand of coffee, the use of
 "slash dev slash foo" will return a strange look for sure. But for the fortunate
-user (and that includes you) using <path>/dev/hda1</path> is just a fast way of
-explaining that we are talking about the primary master IDE, first partition. Or
+user (and that includes you) using <path>/dev/sda1</path> is just a fast way of
+explaining that we are talking about the primary master SATA, first partition. Or
 aren't we?
 </p>
 
@@ -45,7 +45,7 @@
 We all know what a device file is. Some even know why device files have special
 numbers when we take a closer look at them when we issue <c>ls -l</c> in
 <path>/dev</path>. But what we always take for granted is that the primary
-master IDE disk is referred to as <path>/dev/hda</path>. You might not see it
+SATA disk is referred to as <path>/dev/sda</path>. You might not see it
 this way, but this is a flaw by design.
 </p>
 



1.21                 xml/htdocs/doc/en/usb-guide.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/usb-guide.xml?rev=1.21&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/usb-guide.xml?rev=1.21&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/usb-guide.xml?r1=1.20&r2=1.21

Index: usb-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/usb-guide.xml,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -r1.20 -r1.21
--- usb-guide.xml	4 Sep 2011 17:53:40 -0000	1.20
+++ usb-guide.xml	26 Dec 2011 15:22:40 -0000	1.21
@@ -1,5 +1,5 @@
 <?xml version='1.0' encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/usb-guide.xml,v 1.20 2011/09/04 17:53:40 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/usb-guide.xml,v 1.21 2011/12/26 15:22:40 swift Exp $ -->
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
 
 <guide>
@@ -18,8 +18,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.15</version>
-<date>2009-11-29</date>
+<version>2</version>
+<date>2011-12-26</date>
 
 <chapter>
 <title>Introduction</title>
@@ -295,18 +295,18 @@
 usb-storage: waiting for device to settle before scanning
   Vendor: JetFlash  Model: TS512MJF2A        Rev: 1.00
   Type:   Direct-Access                      ANSI SCSI revision: 02
-SCSI device sda: 1003600 512-byte hdwr sectors (514 MB)
+SCSI device sdb: 1003600 512-byte hdwr sectors (514 MB)
 
 <comment>(The write-protect sense is EXPERIMENTAL code in the later kernels)</comment>
-sda: Write Protect is off
-sda: Mode Sense: 0b 00 00 08
-sda: assuming drive cache: write through
-SCSI device sda: 1003600 512-byte hdwr sectors (514 MB)
+sdb: Write Protect is off
+sdb: Mode Sense: 0b 00 00 08
+sdb: assuming drive cache: write through
+SCSI device sdb: 1003600 512-byte hdwr sectors (514 MB)
 /dev/scsi/host0/bus0/target0/lun0: p1
-Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
+Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 0
 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
 usb-storage: device scan complete
-<comment>(At this point, the device is generally accessible by mounting /dev/sda1)</comment>
+<comment>(At this point, the device is generally accessible by mounting /dev/sdb1)</comment>
 
 <comment>(When the device is disconnected, the system acknowledges the same)</comment>
 usb 1-1: USB disconnect, address 2
@@ -319,13 +319,13 @@
 </p>
 
 <pre caption="Accessing the Memory Stick">
-# <i>mount /dev/sda1 /mnt/usb</i>
+# <i>mount /dev/sdb1 /mnt/usb</i>
 # <i>df -h</i>
 Filesystem            Size  Used Avail Use% Mounted on
-/dev/hda8             9.4G  7.5G  1.9G  80% /
-/dev/hda9              11G  8.1G  2.4G  78% /usr
+/dev/sda8             9.4G  7.5G  1.9G  80% /
+/dev/sda9              11G  8.1G  2.4G  78% /usr
 none                  189M     0  189M   0% /dev/shm
-/dev/sda1             490M   34M  457M   7% /mnt/usb
+/dev/sdb1             490M   34M  457M   7% /mnt/usb
 </pre>
 
 <note>



1.11                 xml/htdocs/doc/en/xen-guide.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xen-guide.xml?rev=1.11&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xen-guide.xml?rev=1.11&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xen-guide.xml?r1=1.10&r2=1.11

Index: xen-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xen-guide.xml,v
retrieving revision 1.10
retrieving revision 1.11
diff -u -r1.10 -r1.11
--- xen-guide.xml	29 Aug 2011 10:09:42 -0000	1.10
+++ xen-guide.xml	26 Dec 2011 15:22:40 -0000	1.11
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xen-guide.xml,v 1.10 2011/08/29 10:09:42 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xen-guide.xml,v 1.11 2011/12/26 15:22:40 swift Exp $ -->
 
 <guide>
 <title>Configuring Gentoo with Xen</title>
@@ -20,8 +20,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>6</version>
-<date>2011-08-29</date>
+<version>7</version>
+<date>2011-12-26</date>
 
 <chapter>
 <title>Introduction</title>
@@ -223,7 +223,7 @@
 title Xen 3.0 / Gentoo Linux 2.6.x.y
 root (hd0,0)
 kernel /boot/xen.gz
-module /boot/kernel-2.6.x.y-xen0 root=/dev/hda3
+module /boot/kernel-2.6.x.y-xen0 root=/dev/sda3
 </pre>
 
 <p>





Navigation:
Lists: gentoo-doc-cvs: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
gentoo commit in xml/htdocs/doc/en: openafs.xml
Next by thread:
gentoo commit in xml/htdocs/doc/en/handbook: hb-install-next.xml
Previous by date:
gentoo commit in xml/htdocs/doc/en: xfce-config.xml
Next by date:
gentoo commit in xml/htdocs/doc/en/handbook: hb-install-next.xml


Updated Jun 30, 2012

Summary: Archive of the gentoo-doc-cvs mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.