1 |
When attempting to use gnap_overlay to write to disk I get the following |
2 |
output: |
3 |
|
4 |
# gnap_overlay -c overlays/project/etc/overlay.conf -d /dev/hdc1 -r hda1 -o |
5 |
overlays/project/ -n -m -s 9600 |
6 |
|
7 |
GNAP overlay tool gnap_overlay 1.8 |
8 |
* Checking parameters... |
9 |
[ ok ] |
10 |
* Warning : you have selected disk install |
11 |
* Make sure you are root or have full access to /dev/hdc1 |
12 |
* /dev/hdc must have an MBR installed, run: |
13 |
* dd if=/usr/lib/gnap/mbr/mbr.bin of=/dev/hdc bs=512 count=1 if needed |
14 |
* /dev/hdc1 must contain an active partition: |
15 |
* use fdisk /dev/hdc if needed |
16 |
* Current data on /dev/hdc1 will be destroyed ! |
17 |
* Are your sure you want to continue [N]: Y |
18 |
* Expanding /usr/lib/gnap/gnap-core.tar core... |
19 |
[ ok ] |
20 |
* Preparing overlay... |
21 |
[ ok ] |
22 |
* Adding baudrate for serial console... |
23 |
[ ok ] |
24 |
* Adding overlays/backpacket/ (directory overlay)... |
25 |
[ ok ] |
26 |
* Adding overlays/backpacket/etc/overlay.conf (overlay.conf file)... |
27 |
[ ok ] |
28 |
* Creating overlay tarball... |
29 |
[ ok ] |
30 |
* Formatting /dev/hdc1... |
31 |
[ !! ] |
32 |
* Cleaning temporary directories... |
33 |
[ ok ] |
34 |
Overlay failed, try gnap_overlay -h for more help |
35 |
|
36 |
|
37 |
I had GNAP running on 1.7.1 (syslinux 2.13) but can't seem to get it running |
38 |
now with 1.8. The box that I'm using to build on has been reloaded in the |
39 |
past few days. Perhaps I am missing something in the kernel |
40 |
(2.6.12-gentoo-r9)? The target disk (SanDisk Compact Flash 256MB) has been |
41 |
re-partitioned with a single, bootable partition. The gnap MBR has been |
42 |
copied using dd. And then gnap_overlay as shown above. Can't seem to |
43 |
figure this out. Thierry? Anyone? |
44 |
|
45 |
|
46 |
Ross Carlson |
47 |
Corvus Technologies |
48 |
|
49 |
|
50 |
|
51 |
|
52 |
|
53 |
-- |
54 |
gentoo-embedded@g.o mailing list |