It must be the email client. Please do not flame me, but for email, I
am stuck with MS Windows. Does anyone have a suggestion of a client
that I can put on Windows to enable me to comply with this very
From: solar [mailto:firstname.lastname@example.org]
Sent: Monday, January 23, 2006 4:21 PM
Subject: RE: [gentoo-embedded] FAQ / How To?
Please stop creating a brand new thread for every post when it's really
a RE: to an existing thread. If it's your email client doing it then
please install a functional one.
On Mon, 2006-01-23 at 15:45 -0500, Dennis Taylor wrote:
> Well, I blew that one. I decided to start over just in case I had
> missed something. Unfortunately, I failed to umount portage before I
> did rm -rf on the staging area. Now, I do not have /usr/portage.
> Some days are like that. :-(
> Does anyone know if it is possible to recover just portage without
> starting all over?
> -----Original Message-----
> From: Heath Holcomb [mailto:liquidcable@...]
> Sent: Monday, January 23, 2006 1:32 PM
> To: email@example.com
> Subject: Re: [gentoo-embedded] FAQ / How To?
> I wrote the how-to. I haven't built a system in several weeks, so
> portage has changed a bit (and ebuilds). I plan on updating the
> how-to in a week or two, if I discover new problems (looks like there
> are some).
> heath holcomb
> liquidcable at bulah.com
> On Monday 23 January 2006 12:28, Dennis Taylor wrote:
> > Having followed the other link to
> > http://www.bulah.com/embedded-guide.html, which seems to be more up
> > to
> > date, am still having problems. At step 3 I get the following
> > clwsapp07 root # ROOT=/embedded_rootfs emerge -K uclibc Calculating
> > dependencies !!! There are no packages available to satisfy:
> > !!! Either add a suitable binary package or compile from an ebuild.
> > I thought all the previous steps went OK. Even some of the
> > workarounds seem to no longer be needed. Any ideas?
> > ________________________________
> > From: Joshua ChaitinPollak [mailto:jpollak@...]
> > Sent: Friday, January 20, 2006 11:16 AM
> > To: firstname.lastname@example.org
> > Subject: Re: [gentoo-embedded] FAQ / How To?
> > This is what I use:
> > http://www.bulah.com/embeddedgentoo.html
> > My installation is 6 mb, since I'm installing into 32 mb, I haven't
> > tried too hard to pair it down. I'm installing on Soekris net4526
> > boards. Keep in mind there are somethings you can do after you build
> > you filesystem with Gentoo to make the install even smaller:
> > Remove /usr/include
> > Remove all .keep files
> > Audit the rest of the file system for unnecessary files, expecially
> > /etc and /var
> > I have a series of scripts I've written to automate the process
> > described in the above howto, and I would like to publish them
> > shortly, but please don't hold your breath. :)
> > -Josh
> > On Jan 20, 2006, at 10:55 AM, Dennis Taylor wrote:
> > I have tried various ways of building a root fs with uClibc, but
> > no avail. I have monitored this list long enough to know that
> > someone
> > out there has done it. I need to do it for and X86 target that must
> > fit in about 1.5 MB of flash that gets copied to RAM and started.
> > The "out of the box" configuration I linked to from the uClibc
> > fails in various ways. I like the Gentoo way of doing things, but
> > the
> > HOWTO link I saved a while back does not work.
> > Any pointers to documents that would help me succeed would be
> > appreciated.
> > Dennis Taylor
> email@example.com mailing list
firstname.lastname@example.org mailing list
email@example.com mailing list