Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-embedded
Navigation:
Lists: gentoo-embedded: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: Embedded Gentoo Mail List <gentoo-embedded@g.o>
From: Goran Kavrecic <gorank@...>
Subject: [Fwd: Re: Advantech PCM-3350, linux box, boot from CF]
Date: Tue, 06 Jan 2004 12:11:34 +0100
-----Posredovano sporońćilo-----
From: Goran Kavrecic <gorank@...>
To: Goran Kavrecic <gorank@...>
Subject: Re: [gentoo-embedded] Advantech PCM-3350, linux box, boot from CF
Date: Tue, 06 Jan 2004 12:09:59 +0100

I just restared the same command and it came trough. (?!)

Now I have the i586 structure:
drwxr-xr-x    2 root     root         4096 jan  6 11:56 bin
drwxr-xr-x    2 root     root         4096 jan  6 11:44 etc
drwxr-xr-x    5 root     root         4096 jan  6 10:41
i586-pc-linux-gnu
drwxr-xr-x    3 root     root         4096 jan  6 10:41
i686-pc-linux-gnu
drwxr-xr-x   24 root     root         4096 jan  6 11:44 include
drwxr-xr-x    2 root     root         4096 jan  6 11:56 info
drwxr-xr-x    4 root     root         4096 jan  6 11:56 lib
drwxr-xr-x    2 root     root         4096 jan  6 11:44 libexec
drwxr-xr-x    4 root     root         4096 jan  6 10:47 man
drwxr-xr-x    2 root     root         4096 jan  6 11:45 sbin
drwxr-xr-x    5 root     root         4096 jan  6 11:43 share


Which ones do I need to copy on my CF?

> > If your arch is the same on both machines. Compile binary packages with the 
> > correct optimisations and to a binary install onto the compact flash. Use the 
> > "env ROOT=(CF mount point)" to install them.  Always do a pretend first as I 
> > have seen some occasion pecularities where it doesn;t want ot install to 
> > $ROOT (ref http://bugs.gentoo.org/show_bug.cgi?id=34887)
Where can I specify 'env ...'?

Regards,
Goran

Na 1073383055, 2004-01-06 ob 10:57, je Goran Kavrecic napisal(a):
> OK, I emerged crossdev-0.3, started 'crossdev.sh --arch=i586'. It
> downloaded 4 modules(linux-headers-2.4.19-r1, binutils-2.14.90.0-r6,
> gcc-3.2.3-r3, glibc-2.3.2-r3), copyied to
> /var/tmp/portage/crossdevbuild, then started stage2...stage5, started
> 'Configuring sys-libs/glibc-2.3.2-r3 (full)...' and the following error
> came out.
> 
> ---
> checking for egrep... (cached) grep -E
> checking installed Linux kernel header files... TOO OLD!
> configure: error: GNU libc requires kernel header files from
> Linux 2.0.10 or later to be installed before configuring.
> The kernel header files are found usually in /usr/include/asm and
> /usr/include/linux; make sure these directories use files from
> Linux 2.0.10 or later.  This check uses <linux/version.h>, so
> make sure that file was built correctly when installing the kernel
> header
> files.  To use kernel headers not from /usr/include/linux, use the
> configure option --with-headers.
>  
>  * glibc failed to configure!
> --- 
>  
> I suppose 2.4.19 is newer than 2.0.10. Am I making something wrong?
> 
> Best Regards & Happy New Year,
> Goran Kavrecic
> 
> 
> 
> Na 1071188335, 2003-12-12 ob 01:18, je Daniel napisal(a):
> > > I'm trying to setup a linux box on an Advantech PCM-3350, which is an
> > > PC/104 board.
> > >



--
gentoo-embedded@g.o mailing list

Navigation:
Lists: gentoo-embedded: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
Patches for uClibc-0.9.26
Next by thread:
Gentoo For Zaurus 0.1.1
Previous by date:
Re: Advantech PCM-3350, linux box, boot from CF
Next by date:
Gentoo For Zaurus 0.1.1


Updated Jun 17, 2009

Summary: Archive of the gentoo-embedded mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.