1 |
Michael, |
2 |
|
3 |
|
4 |
Which livecd are you using ? |
5 |
|
6 |
The IDE cdrom bug is supposed to be fixed in the latest. And you're not supposed to get the problem with the current command line that you are using. |
7 |
|
8 |
The last line "Freeing unused kernel memory: 368k freed" is the last thing which happens on the kernel side. |
9 |
After that /sbin/init should be started by the kernel or in this case /bin/sh. |
10 |
|
11 |
If you are using a installer cd, I've never tested it. You should try with a normal livecd. |
12 |
|
13 |
|
14 |
Guy |
15 |
|
16 |
|
17 |
|
18 |
|
19 |
|
20 |
On Fri, 05 Jan 2007 07:09:57 -0500 |
21 |
Michael Greene <listsnews@×××.net> wrote: |
22 |
|
23 |
> Ok, there is an old J5600 at work I want to install Gentoo, but I am at |
24 |
> a loss. The IDE CDROM caused a panic so I found an old SCSI drive and |
25 |
> gave it another shot. Hooked to a monitor and USB mouse and keyboard |
26 |
> the CD will load until the first install screen and the keyboard will |
27 |
> not work. So I hooked it up to a WinXP laptop via HyperTerm and it loads |
28 |
> up to here: |
29 |
> |
30 |
> Freeing unused kernel memory: 368k freed |
31 |
> |
32 |
> Nothing after this... |
33 |
> |
34 |
> Here is the start to stop: |
35 |
> |
36 |
> Command line for kernel: ' TERM=linux root=/dev/ram0 init=/bin/sh cdroot |
37 |
> looptype=squashfs loop=/image.squashfs hda=scsi hdb=scsi console=ttyS0 |
38 |
> palo_kernel=0/vmlinux32' |
39 |
> Selected kernel: /vmlinux32 from partition 0 |
40 |
> Selected ramdisk: initrd from partition 0 |
41 |
> ELF32 executable |
42 |
> Entry 00100000 first 00100000 n 4 |
43 |
> Segment 0 load 00100000 size 3827224 mediaptr 0x1000 |
44 |
> Segment 1 load 004a7000 size 685496 mediaptr 0x3a8000 |
45 |
> Segment 2 load 00550000 size 422021 mediaptr 0x450000 |
46 |
> Segment 3 load 00000000 size 0 mediaptr 0x0 |
47 |
> Loading ramdisk 963641 bytes @ 3ff04000... |
48 |
> Branching to kernel entry point 0x00100000. If this is the last |
49 |
> message you see, you may need to switch your console. This is |
50 |
> a common symptom -- search the FAQ and mailing list at parisc-linux.org |
51 |
> |
52 |
> Linux version 2.6.15.1-pa4-livecd32 (root@hake) (gcc version 3.3.6 |
53 |
> (Gentoo 3.3.6, pie-8.7.8)) #1 Sun Feb 19 07:39:43 UTC 2006 |
54 |
> FP[0] enabled: Rev 1 Model 16 |
55 |
> The 32-bit Kernel has started... |
56 |
> Initialized PDC Console for debugging. |
57 |
> Determining PDC firmware type: System Map. |
58 |
> model 00005d10 00000491 00000000 00000002 781d75ff 100000f0 00000008 |
59 |
> 000000b2 000000b2 |
60 |
> vers 00000300 |
61 |
> CPUID vers 17 rev 10 (0x0000022a) |
62 |
> capabilities 0x3 |
63 |
> model 9000/785/J5600 |
64 |
> Total Memory: 1024 MB |
65 |
> initrd: 4ff04000-4ffef439 |
66 |
> initrd: reserving 3ff04000-3ffef439 (mem_max 40000000) |
67 |
> LCD display at f05d0008,f05d0000 registered |
68 |
> Built 1 zonelists |
69 |
> Kernel command line: TERM=linux root=/dev/ram0 init=/bin/sh cdroot |
70 |
> looptype=squashfs loop=/image.squashfs hda=scsi hdb=scsi console=ttyS0 |
71 |
> palo_kernel=0/vmlinux32 |
72 |
> ide_setup: hda=scsi |
73 |
> ide_setup: hdb=scsi |
74 |
> PID hash table entries: 4096 (order: 12, 65536 bytes) |
75 |
> Console: colour dummy device 160x64 |
76 |
> Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) |
77 |
> Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) |
78 |
> Memory: 1048576k available |
79 |
> Mount-cache hash table entries: 512 |
80 |
> checking if image is initramfs... it is |
81 |
> NET: Registered protocol family 16 |
82 |
> EISA bus registered |
83 |
> Searching for devices... |
84 |
> Found devices: |
85 |
> 1. Astro BC Runway Port at 0xfed00000 [10] { 12, 0x0, 0x582, 0x0000b } |
86 |
> 2. Elroy PCI Bridge at 0xfed30000 [10/0] { 13, 0x0, 0x782, 0x0000a } |
87 |
> 3. Elroy PCI Bridge at 0xfed32000 [10/1] { 13, 0x0, 0x782, 0x0000a } |
88 |
> 4. Elroy PCI Bridge at 0xfed34000 [10/2] { 13, 0x0, 0x782, 0x0000a } |
89 |
> 5. Elroy PCI Bridge at 0xfed38000 [10/4] { 13, 0x0, 0x782, 0x0000a } |
90 |
> 6. Elroy PCI Bridge at 0xfed3c000 [10/6] { 13, 0x0, 0x782, 0x0000a } |
91 |
> 7. Forte W+ 2w at 0xfffa0000 [32] { 0, 0x0, 0x5d1, 0x00004 } |
92 |
> 8. Forte W+ 2w at 0xfffa2000 [34] { 0, 0x0, 0x5d1, 0x00004 } |
93 |
> 9. Memory at 0xfed10200 [49] { 1, 0x0, 0x09e, 0x00009 } |
94 |
> CONFIG_SMP=n ignoring additional CPUs |
95 |
> CPU: probe of 34 failed with error 1 |
96 |
> CPU(s): 1 x PA8600 (PCX-W+) at 552.000000 MHz |
97 |
> Setting cache flush threshold to 6c0 (1 CPUs online) |
98 |
> SBA found Astro 2.1 at 0xfed00000 |
99 |
> LBA version TR4.0 (0x5) found at 0xfed30000 |
100 |
> PCI: Enabled native mode for NS87415 (pif=0x8f) |
101 |
> iosapic: 0xfed30800 : no IRT entry for slot 12, pin 1 |
102 |
> iosapic: no IRTE for 0000:00:0c.0 (IRQ not connected?) |
103 |
> iosapic: 0xfed30800 : no IRT entry for slot 13, pin 1 |
104 |
> iosapic: no IRTE for 0000:00:0d.0 (IRQ not connected?) |
105 |
> iosapic: 0xfed30800 : no IRT entry for slot 14, pin 4 |
106 |
> iosapic: no IRTE for 0000:00:0e.2 (IRQ not connected?) |
107 |
> iosapic: 0xfed30800 : no IRT entry for slot 15, pin 1 |
108 |
> iosapic: no IRTE for 0000:00:0f.0 (IRQ not connected?) |
109 |
> iosapic: 0xfed30800 : no IRT entry for slot 15, pin 1 |
110 |
> iosapic: no IRTE for 0000:00:0f.1 (IRQ not connected?) |
111 |
> LBA version TR4.0 (0x5) found at 0xfed32000 |
112 |
> LBA version TR4.0 (0x5) found at 0xfed34000 |
113 |
> LBA version TR4.0 (0x5) found at 0xfed38000 |
114 |
> LBA version TR4.0 (0x5) found at 0xfed3c000 |
115 |
> Generic PHY: Registered new driver |
116 |
> SCSI subsystem initialized |
117 |
> usbcore: registered new driver usbfs |
118 |
> usbcore: registered new driver hub |
119 |
> unwind_init: start = 0x104a90b0, end = 0x104df6b0, entries = 13920 |
120 |
> Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher |
121 |
> Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
122 |
> SGI XFS with ACLs, security attributes, realtime, no debug enabled |
123 |
> SGI XFS Quota Management subsystem |
124 |
> Initializing Cryptographic API |
125 |
> io scheduler noop registered |
126 |
> io scheduler anticipatory registered |
127 |
> io scheduler deadline registered |
128 |
> io scheduler cfq registered |
129 |
> SuperIO: Found NS87560 Legacy I/O device at 0000:00:0e.1 (IRQ 1) |
130 |
> SuperIO: Serial port 1 at 0x3f8 |
131 |
> SuperIO: Serial port 2 at 0x2f8 |
132 |
> SuperIO: Parallel port at 0x378 |
133 |
> SuperIO: Floppy controller at 0x3f0 |
134 |
> SuperIO: ACPI at 0x7e0 |
135 |
> SuperIO: USB regulator enabled |
136 |
> PDC Stable Storage facility v0.22 |
137 |
> Soft power switch enabled, polling @ 0xf0400804. |
138 |
> STI GSC/PCI core graphics driver Version 0.9a |
139 |
> STI PCI graphic ROM found at f7000000 (128 kB), fb at fb000000 (16 MB) |
140 |
> id 35acda16-9a02587, conforms to spec rev. 8.0c |
141 |
> graphics card name: HPA4982A |
142 |
> sticon: Initializing STI text console. |
143 |
> Console: switching to colour STI console 160x64 |
144 |
> stifb: 'HPA4982A' (id: 0x35acda16) not supported. |
145 |
> Generic RTC Driver v1.07 |
146 |
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled |
147 |
> serial8250: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A |
148 |
> serial8250: ttyS1 at I/O 0x2f8 (irq = 4) is a 16550A |
149 |
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize |
150 |
> loop: loaded (max 8 devices) |
151 |
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
152 |
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
153 |
> NS87415: IDE controller at PCI slot 0000:00:0e.0 |
154 |
> NS87415: chipset revision 3 |
155 |
> NS87415: 100% native mode on irq 7 |
156 |
> ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:DMA, hdb:DMA |
157 |
> ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:DMA, hdd:DMA |
158 |
> sym0: <875> rev 0x4 at pci 0000:00:01.0 irq 65 |
159 |
> sym0: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking |
160 |
> sym0: SCSI BUS has been reset. |
161 |
> scsi0 : sym-2.2.2 |
162 |
> sym1: <896> rev 0x4 at pci 0000:00:0f.0 irq 1 |
163 |
> sym1: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking |
164 |
> sym1: request irq 1 failure |
165 |
> sym1: giving up ... |
166 |
> sym1: <896> rev 0x4 at pci 0000:00:0f.1 irq 1 |
167 |
> sym1: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking |
168 |
> sym1: request irq 1 failure |
169 |
> sym1: giving up ... |
170 |
> sym1: <875> rev 0x4 at pci 0000:02:02.0 irq 66 |
171 |
> sym1: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking |
172 |
> sym1: SCSI BUS has been reset. |
173 |
> scsi3 : sym-2.2.2 |
174 |
> st: Version 20050830, fixed bufsize 32768, s/g segs 256 |
175 |
> usbmon: debugfs is not available |
176 |
> ohci_hcd 0000:00:0e.2: OHCI Host Controller |
177 |
> ohci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1 |
178 |
> ohci_hcd 0000:00:0e.2: request interrupt 1 failed |
179 |
> ohci_hcd 0000:00:0e.2: USB bus 1 deregistered |
180 |
> ohci_hcd 0000:00:0e.2: init 0000:00:0e.2 fail, -16 |
181 |
> ohci_hcd: probe of 0000:00:0e.2 failed with error -16 |
182 |
> usbcore: registered new driver hiddev |
183 |
> usbcore: registered new driver usbhid |
184 |
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver |
185 |
> mice: PS/2 mouse device common for all mice |
186 |
> NET: Registered protocol family 2 |
187 |
> IP route cache hash table entries: 65536 (order: 6, 262144 bytes) |
188 |
> TCP established hash table entries: 262144 (order: 8, 1048576 bytes) |
189 |
> TCP bind hash table entries: 65536 (order: 6, 262144 bytes) |
190 |
> TCP: Hash tables configured (established 262144 bind 65536) |
191 |
> TCP reno registered |
192 |
> TCP bic registered |
193 |
> NET: Registered protocol family 1 |
194 |
> NET: Registered protocol family 10 |
195 |
> lo: Disabled Privacy Extensions |
196 |
> IPv6 over IPv4 tunneling driver |
197 |
> NET: Registered protocol family 17 |
198 |
> Freeing unused kernel memory: 368k freed |
199 |
> |
200 |
> Here is some of the machine info: |
201 |
> |
202 |
> I/O MODULE INFORMATION |
203 |
> |
204 |
> |
205 |
> IODC IODC |
206 |
> Path Decimal Type Location HVER SVER Vers Dep |
207 |
> ------------ ----------- --------------------- ---------- ---- ---- ---- |
208 |
> ---- |
209 |
> PCI1 10/0/1/0 SCSI slot 1 0070 a300 0x00 |
210 |
> 0x00 |
211 |
> LAN 10/0/12/0 Ethernet built-in 0040 a200 0x02 |
212 |
> 0x00 |
213 |
> AUDIO 10/0/13/0 Audio built-in |
214 |
> IDE 10/0/14/0 IDE built-in 0040 a300 0x00 |
215 |
> 0x00 |
216 |
> SUPERIO MISC 10/0/14/1 Bridge Device built-in |
217 |
> SERIAL_1 10/0/14/1/1 RS232 Port built-in 0040 8c00 0x01 |
218 |
> 0x00 |
219 |
> SERIAL_2 10/0/14/1/2 RS232 Port built-in 0040 8c00 0x01 |
220 |
> 0x00 |
221 |
> PARALLEL 10/0/14/1/3 Parallel Port built-in |
222 |
> USB 10/0/14/2 USB built-in 0040 a900 0x98 |
223 |
> 0x00 |
224 |
> SCSI 10/0/15/0 SCSI built-in 0040 a300 0x00 |
225 |
> 0x00 |
226 |
> FWSCSI 10/0/15/1 SCSI built-in 0040 a300 0x00 |
227 |
> 0x00 |
228 |
> PCI2 10/2/2/0 SCSI slot 2 0070 a300 0x00 |
229 |
> 0x00 |
230 |
> GRAPHICS(7) 10/6/7/0 HPA4982A slot 7 0070 8500 0x01 |
231 |
> 0x00 |
232 |
> |
233 |
> PROCESSOR INFORMATION |
234 |
> |
235 |
> |
236 |
> HVERSION SVERSION CVERSION Processor |
237 |
> |
238 |
> Processor Speed Model Model/Op (Revision) State |
239 |
> |
240 |
> --------- -------- -------- -------- ---------- ------------- |
241 |
> |
242 |
> 0 552 MHz 0x5d10 0x0491 768 Active |
243 |
> 1 552 MHz 0x5d10 0x0491 768 Idle |
244 |
> |
245 |
> Central Bus Speed: 120 MHz |
246 |
> Software ID: 2015196671 (dec) |
247 |
> Software ID: 0x781d75ff (hex) |
248 |
> Software Capability: 0xf0 |
249 |
> |
250 |
> FIRMWARE INFORMATION |
251 |
> |
252 |
> |
253 |
> Firmware Version: 5.0 |
254 |
> |
255 |
> 4118 |
256 |
> |
257 |
> |
258 |
> CHIP REVISIONS |
259 |
> |
260 |
> |
261 |
> Module Revision |
262 |
> ------------------- -------- |
263 |
> System Board 0 |
264 |
> PA 8600-8600 CPU 3.0 |
265 |
> PA 8600-8600 CPU 3.0 |
266 |
> Mem/IO Controller 2.1 |
267 |
> PCI Controller #0 4.0 |
268 |
> PCI Controller #1 4.0 |
269 |
> PCI Controller #2 4.0 |
270 |
> PCI Controller #4 4.0 |
271 |
> PCI Controller #6 4.0 |
272 |
> PDC 5.0 (1 MB) |
273 |
> Micro Controller 1.1 |
274 |
> I/O Board 0 |
275 |
> Disk Board 1 |
276 |
> Power Supply 0 |
277 |
> |
278 |
> GRAPHICS(7) 8.12/20 35acda16.09a02587 |
279 |
> |
280 |
> |
281 |
> |
282 |
> Michael |
283 |
> |
284 |
> |
285 |
> -- |
286 |
> gentoo-hppa@g.o mailing list |
287 |
> |
288 |
|
289 |
|
290 |
-- |
291 |
Guy Martin |
292 |
Gentoo Linux - HPPA port Lead |
293 |
|
294 |
-- |
295 |
gentoo-hppa@g.o mailing list |