Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-laptop
Navigation:
Lists: gentoo-laptop: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: gentoo-laptop@g.o
From: Corey Richardson <kb1pkl@...>
Subject: Wireless Authentication Failure -- WPA2-PSK(TKIP+AES), rtl8192se
Date: Sun, 15 May 2011 23:23:36 -0400
Greetings,
(I believe this is a decent list for this, redirect otherwise)

I have been unable to authenticate to my WAP. From the subject you can
see the authentication it normally uses. I tried bunches of other
combinations but I can only connect when the network is Unprotected. I
have an rtl8192se, the driver is built into the kernel and I have the
rtl8192se and rtl8192se-firmware packages. I am led to believe this
isn't a driver issue. I use wpa_supplicant with wicd. The oddest part is
it worked fine yesterday when I shut off the laptop, and now it doesn't
work. I've re-emerged wicd and friends, rebuilt the kernel, made sure
options were checked in the kernel config, etc.

What more should I do, and is there any more information I need to
include? Attached are a few logs. I couldn't find any logs for
wpa_supplicant, however.
-- 
Corey Richardson
2011/05/15 23:11:30 :: ---------------------------
2011/05/15 23:11:30 :: wicd initializing...
2011/05/15 23:11:30 :: ---------------------------
2011/05/15 23:11:30 :: wicd is version 1.7.1b2 565
2011/05/15 23:11:30 :: setting backend to external
2011/05/15 23:11:30 :: trying to load backend external
2011/05/15 23:11:30 :: successfully loaded backend external
2011/05/15 23:11:30 :: trying to load backend external
2011/05/15 23:11:30 :: successfully loaded backend external
2011/05/15 23:11:30 :: Automatically detected wireless interface wlan0
2011/05/15 23:11:30 :: setting wireless interface wlan0
2011/05/15 23:11:30 :: automatically detected wired interface eth0
2011/05/15 23:11:30 :: setting wired interface eth0
2011/05/15 23:11:30 :: setting wpa driver wext
2011/05/15 23:11:30 :: setting use global dns to False
2011/05/15 23:11:30 :: setting global dns
2011/05/15 23:11:30 :: global dns servers are None None None
2011/05/15 23:11:30 :: domain is None
2011/05/15 23:11:30 :: search domain is None
2011/05/15 23:11:30 :: setting automatically reconnect when connection drops True
2011/05/15 23:11:30 :: Setting dhcp client to 0
2011/05/15 23:11:30 :: Wireless configuration file found...
2011/05/15 23:11:30 :: Wired configuration file found...
2011/05/15 23:11:30 :: chmoding configuration files 0600...
2011/05/15 23:11:30 :: chowning configuration files root:root...
2011/05/15 23:11:30 :: Using wireless interface...wlan0
2011/05/15 23:11:30 :: Using wired interface...eth0

2011/05/15 23:14:31 :: ---------------------------
2011/05/15 23:14:31 :: wicd initializing...
2011/05/15 23:14:31 :: ---------------------------
2011/05/15 23:14:31 :: wicd is version 1.7.1b2 565
2011/05/15 23:14:31 :: setting backend to external
2011/05/15 23:14:31 :: trying to load backend external
2011/05/15 23:14:31 :: successfully loaded backend external
2011/05/15 23:14:31 :: trying to load backend external
2011/05/15 23:14:31 :: successfully loaded backend external
2011/05/15 23:14:31 :: Automatically detected wireless interface wlan0
2011/05/15 23:14:31 :: setting wireless interface wlan0
2011/05/15 23:14:31 :: automatically detected wired interface eth0
2011/05/15 23:14:31 :: setting wired interface eth0
2011/05/15 23:14:31 :: setting wpa driver wext
2011/05/15 23:14:31 :: setting use global dns to False
2011/05/15 23:14:31 :: setting global dns
2011/05/15 23:14:31 :: global dns servers are None None None
2011/05/15 23:14:31 :: domain is None
2011/05/15 23:14:31 :: search domain is None
2011/05/15 23:14:31 :: setting automatically reconnect when connection drops True
2011/05/15 23:14:31 :: Setting dhcp client to 0
2011/05/15 23:14:31 :: Wireless configuration file found...
2011/05/15 23:14:31 :: Wired configuration file found...
2011/05/15 23:14:31 :: chmoding configuration files 0600...
2011/05/15 23:14:31 :: chowning configuration files root:root...
2011/05/15 23:14:31 :: Using wireless interface...wlan0
2011/05/15 23:14:31 :: Using wired interface...eth0
2011/05/15 23:14:33 :: hidden
2011/05/15 23:14:39 :: Autoconnecting...
2011/05/15 23:14:39 :: No wired connection present, attempting to autoconnect to wireless network
2011/05/15 23:14:40 :: hidden
2011/05/15 23:14:40 :: trying to automatically connect to...cnc_west
2011/05/15 23:14:40 :: Connecting to wireless network cnc_west
2011/05/15 23:14:41 :: Putting interface down
2011/05/15 23:14:41 :: Releasing DHCP leases...
2011/05/15 23:14:41 :: Setting false IP...
2011/05/15 23:14:42 :: Stopping wpa_supplicant
2011/05/15 23:14:42 :: Flushing the routing table...
2011/05/15 23:14:42 :: Putting interface up...
2011/05/15 23:14:44 :: Generating psk...
2011/05/15 23:14:44 :: Attempting to authenticate...
2011/05/15 23:14:47 :: wpa_supplicant rescan forced...
2011/05/15 23:15:25 :: wpa_supplicant authentication may have failed.
2011/05/15 23:15:25 :: connect result is Failed
2011/05/15 23:15:25 :: exiting connection thread
2011/05/15 23:15:28 :: Sending connection attempt result bad_pass
2011/05/15 23:15:28 :: Autoconnecting...
2011/05/15 23:15:28 :: No wired connection present, attempting to autoconnect to wireless network
2011/05/15 23:15:31 :: hidden
2011/05/15 23:15:31 :: trying to automatically connect to...cnc_west
2011/05/15 23:15:31 :: Connecting to wireless network cnc_west
2011/05/15 23:15:31 :: Putting interface down
2011/05/15 23:15:31 :: Releasing DHCP leases...
2011/05/15 23:15:31 :: Setting false IP...
2011/05/15 23:15:31 :: Stopping wpa_supplicant
2011/05/15 23:15:31 :: Flushing the routing table...
2011/05/15 23:15:31 :: Putting interface up...
2011/05/15 23:15:33 :: Generating psk...
2011/05/15 23:15:33 :: Attempting to authenticate...
2011/05/15 23:15:36 :: wpa_supplicant rescan forced...
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-gentoo-r5 (root@dalek) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #1 SMP Sun May 15 14:32:50 EDT 2011
[    0.000000] Command line: root=/dev/sda3
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ba64000 (usable)
[    0.000000]  BIOS-e820: 000000007ba64000 - 000000007babf000 (reserved)
[    0.000000]  BIOS-e820: 000000007babf000 - 000000007bb82000 (usable)
[    0.000000]  BIOS-e820: 000000007bb82000 - 000000007bbbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007bbbf000 - 000000007bbdf000 (usable)
[    0.000000]  BIOS-e820: 000000007bbdf000 - 000000007bbf7000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
[    0.000000]  BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Hewlett-Packard Presario CQ56 Notebook PC/1605, BIOS F.03 07/07/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FC0000000 write-back
[    0.000000]   2 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
[    0.000000]   4 base 07BC00000 mask FFFC00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-000000007bc00000
[    0.000000]  0000000000 - 007bc00000 page 2M
[    0.000000] kernel direct mapping tables up to 7bc00000 @ 1fffd000-20000000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 000000007bbf6120 0006C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 000000007bbf5000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 000000007bbe3000 0D8C1 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 000000007bb8f000 00040
[    0.000000] ACPI: HPET 000000007bbf4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 000000007bbf3000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 000000007bbf2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASF! 000000007bbf1000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 000000007bbe2000 00176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)
[    0.000000] ACPI: BOOT 000000007bbe1000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007bbe0000 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20060317)
[    0.000000] ACPI: SSDT 000000007bbdf000 00655 (v01  PmRef    CpuPm 00003000 INTL 20060317)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007bc00000
[    0.000000] Initmem setup node 0 0000000000000000-000000007bc00000
[    0.000000]   NODE_DATA [000000007ba5f000 - 000000007ba63fff]
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079200000-ffff88007adfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0007ba64
[    0.000000]     0: 0x0007babf -> 0x0007bb82
[    0.000000]     0: 0x0007bbbf -> 0x0007bbdf
[    0.000000]     0: 0x0007bbf7 -> 0x0007bc00
[    0.000000] On node 0 totalpages: 506590
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6874 pages used for memmap
[    0.000000]   DMA32 zone: 495734 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000007ba64000 - 000000007babf000
[    0.000000] PM: Registered nosave memory: 000000007bb82000 - 000000007bbbf000
[    0.000000] PM: Registered nosave memory: 000000007bbdf000 - 000000007bbf7000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007b800000 s75392 r8192 d22912 u524288
[    0.000000] pcpu-alloc: s75392 r8192 d22912 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 499654
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/sda3
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1986448k/2027520k available (5583k kernel code, 1160k absent, 39912k reserved, 3495k data, 588k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2194.127 MHz processor.
[    0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.25 BogoMIPS (lpj=2194127)
[    0.001245] pid_max: default: 32768 minimum: 301
[    0.001390] Security Framework initialized
[    0.001511] SELinux:  Initializing.
[    0.002011] SELinux:  Starting in permissive mode
[    0.002210] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003547] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.004228] Mount-cache hash table entries: 256
[    0.004527] Initializing cgroup subsys ns
[    0.004651] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.004854] Initializing cgroup subsys cpuacct
[    0.004976] Initializing cgroup subsys freezer
[    0.005036] mce: CPU supports 6 MCE banks
[    0.005161] CPU0: Thermal monitoring enabled (TM1)
[    0.005283] using mwait in idle threads.
[    0.005437] SMP alternatives: switching to UP code
[    0.010468] ACPI: Core revision 20110112
[    0.017071] Setting APIC routing to flat
[    0.017506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.027826] CPU0: Intel(R) Celeron(R) CPU          900  @ 2.20GHz stepping 0a
[    0.028998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.028998] ... version:                2
[    0.028998] ... bit width:              40
[    0.028998] ... generic registers:      2
[    0.028998] ... value mask:             000000ffffffffff
[    0.028998] ... max period:             000000007fffffff
[    0.028998] ... fixed-purpose events:   3
[    0.028998] ... event mask:             0000000700000003
[    0.029140] Brought up 1 CPUs
[    0.029259] Total of 1 processors activated (4388.25 BogoMIPS).
[    0.029878] kworker/u:0 used greatest stack depth: 6144 bytes left
[    0.030278] Time:  3:14:12  Date: 05/16/11
[    0.030434] NET: Registered protocol family 16
[    0.030847] kworker/u:0 used greatest stack depth: 5848 bytes left
[    0.031091] ACPI: bus type pci registered
[    0.031322] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.031527] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.038053] PCI: Using configuration type 1 for base access
[    0.046377] bio: create slab <bio-0> at 0
[    0.048053] ACPI: EC: Look up EC in DSDT
[    0.049484] ACPI: Executed 1 blocks of module-level executable AML code
[    0.051229] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.053143] ACPI: Interpreter enabled
[    0.053264] ACPI: (supports S0 S3 S4 S5)
[    0.053561] ACPI: Using IOAPIC for interrupt routing
[    0.063207] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.063551] ACPI: No dock devices found.
[    0.063672] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.064280] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.065073] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.065198] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.065321] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.065522] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[    0.065735] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[    0.065776] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[    0.065789] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[    0.065798] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.065804] pci 0000:00:02.0: reg 20: [io  0x4110-0x4117]
[    0.065835] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[    0.065846] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
[    0.065919] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.065980] pci 0000:00:1a.0: reg 20: [io  0x40e0-0x40ff]
[    0.066030] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.066078] pci 0000:00:1a.1: reg 20: [io  0x40c0-0x40df]
[    0.066147] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.067995] pci 0000:00:1a.7: reg 10: [mem 0x94505c00-0x94505fff]
[    0.080021] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.080026] pci 0000:00:1a.7: PME# disabled
[    0.080057] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.080073] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
[    0.080131] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.080135] pci 0000:00:1b.0: PME# disabled
[    0.080154] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.080212] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.080216] pci 0000:00:1c.0: PME# disabled
[    0.080237] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[    0.080297] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.080300] pci 0000:00:1c.1: PME# disabled
[    0.080329] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.080392] pci 0000:00:1d.0: reg 20: [io  0x40a0-0x40bf]
[    0.080454] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.081033] pci 0000:00:1d.1: reg 20: [io  0x4080-0x409f]
[    0.081086] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.081147] pci 0000:00:1d.2: reg 20: [io  0x4060-0x407f]
[    0.081210] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
[    0.081269] pci 0000:00:1d.3: reg 20: [io  0x4040-0x405f]
[    0.081332] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.082994] pci 0000:00:1d.7: reg 10: [mem 0x94505800-0x94505bff]
[    0.095020] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.095025] pci 0000:00:1d.7: PME# disabled
[    0.095046] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.095106] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[    0.095222] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[    0.095243] pci 0000:00:1f.2: reg 10: [io  0x4108-0x410f]
[    0.095251] pci 0000:00:1f.2: reg 14: [io  0x411c-0x411f]
[    0.095260] pci 0000:00:1f.2: reg 18: [io  0x4100-0x4107]
[    0.095269] pci 0000:00:1f.2: reg 1c: [io  0x4118-0x411b]
[    0.095997] pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
[    0.096006] pci 0000:00:1f.2: reg 24: [mem 0x94505000-0x945057ff]
[    0.096042] pci 0000:00:1f.2: PME# supported from D3hot
[    0.096046] pci 0000:00:1f.2: PME# disabled
[    0.096063] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.096080] pci 0000:00:1f.3: reg 10: [mem 0x94506000-0x945060ff 64bit]
[    0.096102] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.096138] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180
[    0.096163] pci 0000:00:1f.6: reg 10: [mem 0x94504000-0x94504fff 64bit]
[    0.096294] pci 0000:02:00.0: [10ec:8171] type 0 class 0x000280
[    0.096312] pci 0000:02:00.0: reg 10: [io  0x3000-0x30ff]
[    0.096325] pci 0000:02:00.0: reg 14: [mem 0x93500000-0x93503fff]
[    0.096414] pci 0000:02:00.0: supports D1 D2
[    0.096416] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.096421] pci 0000:02:00.0: PME# disabled
[    0.098006] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.098129] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.098133] pci 0000:00:1c.0:   bridge window [mem 0x93500000-0x944fffff]
[    0.098139] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
[    0.098202] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[    0.098219] pci 0000:03:00.0: reg 10: [io  0x2000-0x20ff]
[    0.098250] pci 0000:03:00.0: reg 18: [mem 0x91410000-0x91410fff 64bit pref]
[    0.098269] pci 0000:03:00.0: reg 20: [mem 0x91400000-0x9140ffff 64bit pref]
[    0.098282] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.098323] pci 0000:03:00.0: supports D1 D2
[    0.098325] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.098330] pci 0000:03:00.0: PME# disabled
[    0.100005] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.100129] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.100133] pci 0000:00:1c.1:   bridge window [mem 0x92500000-0x934fffff]
[    0.100139] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
[    0.100204] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.100330] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.100335] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.100341] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.100343] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.100346] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.100348] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.100351] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[    0.100369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.100589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.100672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.100723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.106010] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.106548] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.107044] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.107575] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.108043] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.108574] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[    0.109162] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.109693] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.110470] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.110680] vgaarb: loaded
[    0.110959] SCSI subsystem initialized
[    0.111097] libata version 3.00 loaded.
[    0.111206] usbcore: registered new interface driver usbfs
[    0.111369] usbcore: registered new interface driver hub
[    0.111531] usbcore: registered new device driver usb
[    0.112193] wmi: Mapper loaded
[    0.112356] Advanced Linux Sound Architecture Driver Version 1.0.23.
[    0.112518] PCI: Using ACPI for IRQ routing
[    0.112638] PCI: pci_cache_line_size set to 64 bytes
[    0.112717] reserve RAM buffer: 000000000009e000 - 000000000009ffff 
[    0.112720] reserve RAM buffer: 000000007ba64000 - 000000007bffffff 
[    0.112723] reserve RAM buffer: 000000007bb82000 - 000000007bffffff 
[    0.112726] reserve RAM buffer: 000000007bbdf000 - 000000007bffffff 
[    0.112728] reserve RAM buffer: 000000007bc00000 - 000000007bffffff 
[    0.113075] cfg80211: Calling CRDA to update world regulatory domain
[    0.113363] NetLabel: Initializing
[    0.113481] NetLabel:  domain hash size = 128
[    0.114014] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.114144] NetLabel:  unlabeled traffic allowed by default
[    0.115082] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.115384] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.117004] Switching to clocksource hpet
[    0.117353] Switched to NOHz mode on CPU #0
[    0.122777] pnp: PnP ACPI init
[    0.122909] ACPI: bus type pnp registered
[    0.123095] pnp 00:00: [mem 0xf8000000-0xfbffffff]
[    0.123232] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.123357] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.124002] pnp 00:01: [bus 00-ff]
[    0.124005] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.124008] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.124023] pnp 00:01: [io  0x0d00-0xffff window]
[    0.124025] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.124028] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[    0.124030] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[    0.124032] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[    0.124034] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[    0.124036] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[    0.124039] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[    0.124041] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[    0.124043] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[    0.124045] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[    0.124047] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[    0.124049] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[    0.124052] pnp 00:01: [mem 0x000ec000-0x000effff window]
[    0.124054] pnp 00:01: [mem 0x000f0000-0x000fffff window]
[    0.124056] pnp 00:01: [mem 0x80000000-0xfebfffff window]
[    0.124058] pnp 00:01: [mem 0xfed40000-0xfed44fff window]
[    0.124158] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.124319] pnp 00:02: [io  0x002e-0x002f]
[    0.124321] pnp 00:02: [io  0x004e-0x004f]
[    0.124323] pnp 00:02: [io  0x164e-0x164f]
[    0.124325] pnp 00:02: [io  0x0061]
[    0.124327] pnp 00:02: [io  0x0070]
[    0.124331] pnp 00:02: [io  0x0080]
[    0.124333] pnp 00:02: [io  0x0092]
[    0.124335] pnp 00:02: [io  0x00b2-0x00b3]
[    0.124337] pnp 00:02: [io  0x0063]
[    0.124338] pnp 00:02: [io  0x0065]
[    0.124340] pnp 00:02: [io  0x0067]
[    0.124342] pnp 00:02: [io  0x0600-0x060f]
[    0.124344] pnp 00:02: [io  0x0610]
[    0.124345] pnp 00:02: [io  0x0800-0x080f]
[    0.124347] pnp 00:02: [io  0x0810-0x0817]
[    0.124349] pnp 00:02: [io  0x0820-0x0823]
[    0.124351] pnp 00:02: [io  0x0400-0x047f]
[    0.124352] pnp 00:02: [io  0x0500-0x053f]
[    0.124354] pnp 00:02: [io  0x0380-0x0387]
[    0.124356] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[    0.124358] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[    0.124360] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[    0.124362] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[    0.124364] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[    0.124366] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.124368] pnp 00:02: [mem 0xfed20000-0xfed3ffff]
[    0.124370] pnp 00:02: [mem 0xfed40000-0xfed44fff]
[    0.124372] pnp 00:02: [mem 0xfed45000-0xfed8ffff]
[    0.124374] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.124482] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.124607] system 00:02: [io  0x0600-0x060f] has been reserved
[    0.124730] system 00:02: [io  0x0610] has been reserved
[    0.124851] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.124974] system 00:02: [io  0x0810-0x0817] has been reserved
[    0.125117] system 00:02: [io  0x0820-0x0823] has been reserved
[    0.125239] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.125362] system 00:02: [io  0x0500-0x053f] has been reserved
[    0.125485] system 00:02: [io  0x0380-0x0387] has been reserved
[    0.125608] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.125732] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.125855] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.125978] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.126110] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.126234] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.126358] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.126482] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.126606] system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.126730] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.126855] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.126867] pnp 00:03: [io  0x0000-0x001f]
[    0.126869] pnp 00:03: [io  0x0081-0x0091]
[    0.126871] pnp 00:03: [io  0x0093-0x009f]
[    0.126873] pnp 00:03: [io  0x00c0-0x00df]
[    0.126875] pnp 00:03: [dma 4]
[    0.126930] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.126958] pnp 00:04: [io  0x0070-0x0077]
[    0.127029] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.127097] pnp 00:05: [irq 0 disabled]
[    0.127107] pnp 00:05: [irq 8]
[    0.127109] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[    0.127169] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.127182] pnp 00:06: [io  0x00f0]
[    0.127187] pnp 00:06: [irq 13]
[    0.127243] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.127254] pnp 00:07: [mem 0xff800000-0xffffffff]
[    0.127311] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[    0.127331] pnp 00:08: [io  0x0060]
[    0.127332] pnp 00:08: [io  0x0064]
[    0.127338] pnp 00:08: [irq 1]
[    0.127395] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.127417] pnp 00:09: [irq 12]
[    0.127477] pnp 00:09: Plug and Play ACPI device, IDs SYN1e37 SYN1e00 SYN0002 PNP0f13 (active)
[    0.127637] pnp: PnP ACPI: found 10 devices
[    0.127758] ACPI: ACPI bus type pnp unregistered
[    0.132530] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.132762] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.132885] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.133031] pci 0000:00:1c.0:   bridge window [mem 0x93500000-0x944fffff]
[    0.133156] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
[    0.133364] pci 0000:03:00.0: BAR 6: assigned [mem 0x91420000-0x9142ffff pref]
[    0.133565] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.133687] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.133812] pci 0000:00:1c.1:   bridge window [mem 0x92500000-0x934fffff]
[    0.133937] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
[    0.134149] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.134270] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.134395] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.134518] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.134661] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.134787] pci 0000:00:1c.0: setting latency timer to 64
[    0.134797] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.134921] pci 0000:00:1c.1: setting latency timer to 64
[    0.134928] pci 0000:00:1e.0: setting latency timer to 64
[    0.134932] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.134934] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.134936] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.134938] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[    0.134941] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.134944] pci_bus 0000:02: resource 1 [mem 0x93500000-0x944fffff]
[    0.134946] pci_bus 0000:02: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[    0.134949] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.134952] pci_bus 0000:03: resource 1 [mem 0x92500000-0x934fffff]
[    0.134955] pci_bus 0000:03: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[    0.134958] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.134961] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.134963] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.134966] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
[    0.135000] NET: Registered protocol family 2
[    0.135214] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.135894] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.138256] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.138891] TCP: Hash tables configured (established 262144 bind 65536)
[    0.139060] TCP reno registered
[    0.139201] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.139343] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.139614] NET: Registered protocol family 1
[    0.139846] RPC: Registered udp transport module.
[    0.139966] RPC: Registered tcp transport module.
[    0.140103] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.140239] pci 0000:00:02.0: Boot video device
[    0.140249] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10
[    0.140251] pci 0000:00:1a.0: Performing full reset
[    0.140271] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
[    0.140272] pci 0000:00:1a.1: Performing full reset
[    0.140304] pci 0000:00:1a.7: EHCI: BIOS handoff
[    0.152099] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
[    0.152101] pci 0000:00:1d.0: Performing full reset
[    0.152120] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[    0.152122] pci 0000:00:1d.1: Performing full reset
[    0.152140] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[    0.152142] pci 0000:00:1d.2: Performing full reset
[    0.152161] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
[    0.152162] pci 0000:00:1d.3: Performing full reset
[    0.152185] pci 0000:00:1d.7: EHCI: BIOS handoff
[    0.164137] PCI: CLS 64 bytes, default 64
[    0.164289] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.164405] Simple Boot Flag at 0x44 set to 0x1
[    0.165157] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[    0.165316] microcode: Microcode Update Driver: v2.00 <tigran@...>, Peter Oruba
[    0.165757] audit: initializing netlink socket (disabled)
[    0.165881] type=2000 audit(1305515652.164:1): initialized
[    0.166401] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.170056] VFS: Disk quotas dquot_6.5.2
[    0.170300] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.171559] msgmni has been set to 3879
[    0.171773] SELinux:  Registering netfilter hooks
[    0.172166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.172353] io scheduler noop registered
[    0.172464] io scheduler deadline registered
[    0.172645] io scheduler cfq registered (default)
[    0.172862] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.172954] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.173134] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.173527] Non-volatile memory driver v1.3
[    0.173640] Linux agpgart interface v0.103
[    0.173788] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[    0.173988] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.174631] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    0.174898] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    0.177441] ACPI: AC Adapter [ACAD] (on-line)
[    0.177789] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.178029] ACPI: Power Button [PWRB]
[    0.179002] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.179574] ACPI: Lid Switch [LID0]
[    0.179769] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.179956] ACPI: Power Button [PWRF]
[    0.180164] ACPI: acpi_idle registered with cpuidle
[    0.180333] Monitor-Mwait will be used to enter C-1 state
[    0.180352] Monitor-Mwait will be used to enter C-2 state
[    0.180370] Monitor-Mwait will be used to enter C-3 state
[    0.180375] Marking TSC unstable due to TSC halts in idle
[    0.184244] [Firmware Bug]: Invalid critical threshold (0)
[    0.185734] thermal LNXTHERM:00: registered as thermal_zone0
[    0.185850] ACPI: Thermal Zone [TZ01] (49 C)
[    0.186143] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.187452] [drm] Initialized drm 1.1.0 20060810
[    0.187658] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.187777] i915 0000:00:02.0: setting latency timer to 64
[    0.225946] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.226088] [drm] Driver supports precise vblank timestamp query.
[    0.313243] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.313760] fixme: max PWM is zero.
[    0.364863] ACPI: Battery Slot [BAT0] (battery present)
[    0.627199] fbcon: inteldrmfb (fb0) is primary device
[    0.636558] Console: switching to colour frame buffer device 170x48
[    0.639068] fb0: inteldrmfb frame buffer device
[    0.639088] drm: registered panic notifier
[    0.643184] ACPI Error: [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dswload-802)
[    0.643246] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20110112/psloop-231)
[    0.643291] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.DD03.GBQC] (Node ffff880078f42528), AE_ALREADY_EXISTS (20110112/psparse-536)
[    0.643378] ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
[    0.643425] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.DD03._BQC] (Node ffff880078f42500), AE_ALREADY_EXISTS (20110112/psparse-536)
[    0.643510] ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
[    0.643558] ACPI Warning: Evaluating _BQC failed (20110112/video-484)
[    0.645816] acpi device:03: registered as cooling_device1
[    0.646020] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    0.646071] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    0.646261] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    0.648230] brd: module loaded
[    0.649255] loop: module loaded
[    0.649529] ahci 0000:00:1f.2: version 3.0
[    0.649554] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.649647] ahci: SSS flag set, parallel bus scan disabled
[    0.649710] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.651180] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs 
[    0.652650] ahci 0000:00:1f.2: setting latency timer to 64
[    0.659007] scsi0 : ahci
[    0.660643] scsi1 : ahci
[    0.662209] scsi2 : ahci
[    0.663740] scsi3 : ahci
[    0.665229] scsi4 : ahci
[    0.666713] scsi5 : ahci
[    0.668280] ata1: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505100 irq 19
[    0.669670] ata2: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505180 irq 19
[    0.671041] ata3: DUMMY
[    0.672397] ata4: DUMMY
[    0.673693] ata5: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505300 irq 19
[    0.675009] ata6: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505380 irq 19
[    0.676617] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.677930] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.679290] r8169 0000:03:00.0: setting latency timer to 64
[    0.679302] r8169 0000:03:00.0: no MSI. Back to INTx.
[    0.680850] r8169 0000:03:00.0: eth0: RTL8102e at 0xffffc90004912000, 60:eb:69:1b:e5:60, XID 04e00000 IRQ 17
[    0.682223] console [netcon0] enabled
[    0.683528] netconsole: network logging started
[    0.685013] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.686343] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[    0.686363] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.687710] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.687714] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.689049] drivers/usb/core/inode.c: creating file 'devices'
[    0.689061] drivers/usb/core/inode.c: creating file '001'
[    0.689118] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.690485] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
[    0.690490] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[    0.690522] ehci_hcd 0000:00:1a.7: debug port 1
[    0.691855] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.695737] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.695739] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[    0.695752] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94505c00
[    0.697092] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.700983] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    0.706022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.707383] usb usb1: default language 0x0409
[    0.707389] usb usb1: udev 1, busnum 1, minor = 0
[    0.707391] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.708707] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.710028] usb usb1: Product: EHCI Host Controller
[    0.711302] usb usb1: Manufacturer: Linux 2.6.38-gentoo-r5 ehci_hcd
[    0.712547] usb usb1: SerialNumber: 0000:00:1a.7
[    0.713826] usb usb1: usb_probe_device
[    0.713829] usb usb1: configuration #1 chosen from 1 choice
[    0.713836] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    0.713892] hub 1-0:1.0: usb_probe_interface
[    0.713894] hub 1-0:1.0: usb_probe_interface - got id
[    0.713897] hub 1-0:1.0: USB hub found
[    0.715077] hub 1-0:1.0: 4 ports detected
[    0.716218] hub 1-0:1.0: standalone hub
[    0.716219] hub 1-0:1.0: no power switching (usb 1.0)
[    0.716221] hub 1-0:1.0: individual port over-current protection
[    0.716223] hub 1-0:1.0: power on to power good time: 20ms
[    0.716227] hub 1-0:1.0: local power source is good
[    0.716229] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    0.716254] drivers/usb/core/inode.c: creating file '001'
[    0.716300] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.717497] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.717500] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.718642] drivers/usb/core/inode.c: creating file '002'
[    0.718700] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.719833] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[    0.719838] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[    0.719867] ehci_hcd 0000:00:1d.7: debug port 1
[    0.720970] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.724851] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.724853] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[    0.724875] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x94505800
[    0.725971] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.729854] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    0.735021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.736130] usb usb2: default language 0x0409
[    0.736136] usb usb2: udev 1, busnum 2, minor = 128
[    0.736138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.737231] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.738316] usb usb2: Product: EHCI Host Controller
[    0.739379] usb usb2: Manufacturer: Linux 2.6.38-gentoo-r5 ehci_hcd
[    0.740445] usb usb2: SerialNumber: 0000:00:1d.7
[    0.741550] usb usb2: usb_probe_device
[    0.741552] usb usb2: configuration #1 chosen from 1 choice
[    0.741559] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    0.741607] hub 2-0:1.0: usb_probe_interface
[    0.741609] hub 2-0:1.0: usb_probe_interface - got id
[    0.741610] hub 2-0:1.0: USB hub found
[    0.742663] hub 2-0:1.0: 8 ports detected
[    0.743714] hub 2-0:1.0: standalone hub
[    0.743715] hub 2-0:1.0: no power switching (usb 1.0)
[    0.743717] hub 2-0:1.0: individual port over-current protection
[    0.743719] hub 2-0:1.0: power on to power good time: 20ms
[    0.743723] hub 2-0:1.0: local power source is good
[    0.743725] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    0.743762] drivers/usb/core/inode.c: creating file '001'
[    0.743832] uhci_hcd: USB Universal Host Controller Interface driver
[    0.745036] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.746163] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.746167] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.747311] drivers/usb/core/inode.c: creating file '003'
[    0.747371] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.748503] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.749642] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[    0.749644] uhci_hcd 0000:00:1a.0: Performing full reset
[    0.749658] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[    0.749665] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[    0.750826] usb usb3: default language 0x0409
[    0.750832] usb usb3: udev 1, busnum 3, minor = 256
[    0.750835] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.751979] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.753119] usb usb3: Product: UHCI Host Controller
[    0.754256] usb usb3: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[    0.755389] usb usb3: SerialNumber: 0000:00:1a.0
[    0.756584] usb usb3: usb_probe_device
[    0.756587] usb usb3: configuration #1 chosen from 1 choice
[    0.756593] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    0.756645] hub 3-0:1.0: usb_probe_interface
[    0.756647] hub 3-0:1.0: usb_probe_interface - got id
[    0.756648] hub 3-0:1.0: USB hub found
[    0.757779] hub 3-0:1.0: 2 ports detected
[    0.758851] hub 3-0:1.0: standalone hub
[    0.758852] hub 3-0:1.0: no power switching (usb 1.0)
[    0.758854] hub 3-0:1.0: individual port over-current protection
[    0.758856] hub 3-0:1.0: power on to power good time: 2ms
[    0.758859] hub 3-0:1.0: local power source is good
[    0.758861] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    0.758880] drivers/usb/core/inode.c: creating file '001'
[    0.758909] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[    0.758933] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.760017] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.760020] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.761106] drivers/usb/core/inode.c: creating file '004'
[    0.761167] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.762265] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.763339] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[    0.763341] uhci_hcd 0000:00:1a.1: Performing full reset
[    0.763356] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[    0.763371] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[    0.764476] usb usb4: default language 0x0409
[    0.764481] usb usb4: udev 1, busnum 4, minor = 384
[    0.764483] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.765547] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.766625] usb usb4: Product: UHCI Host Controller
[    0.767688] usb usb4: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[    0.768764] usb usb4: SerialNumber: 0000:00:1a.1
[    0.769896] usb usb4: usb_probe_device
[    0.769899] usb usb4: configuration #1 chosen from 1 choice
[    0.769905] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    0.769955] hub 4-0:1.0: usb_probe_interface
[    0.769957] hub 4-0:1.0: usb_probe_interface - got id
[    0.769959] hub 4-0:1.0: USB hub found
[    0.771030] hub 4-0:1.0: 2 ports detected
[    0.772078] hub 4-0:1.0: standalone hub
[    0.772080] hub 4-0:1.0: no power switching (usb 1.0)
[    0.772082] hub 4-0:1.0: individual port over-current protection
[    0.772084] hub 4-0:1.0: power on to power good time: 2ms
[    0.772087] hub 4-0:1.0: local power source is good
[    0.772089] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    0.772105] drivers/usb/core/inode.c: creating file '001'
[    0.772136] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
[    0.772154] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.773244] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.773248] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.774327] drivers/usb/core/inode.c: creating file '005'
[    0.774382] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.775480] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.776574] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[    0.776576] uhci_hcd 0000:00:1d.0: Performing full reset
[    0.776591] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[    0.776597] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040a0
[    0.777705] usb usb5: default language 0x0409
[    0.777711] usb usb5: udev 1, busnum 5, minor = 512
[    0.777713] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.778782] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.779861] usb usb5: Product: UHCI Host Controller
[    0.780937] usb usb5: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[    0.782030] usb usb5: SerialNumber: 0000:00:1d.0
[    0.783178] usb usb5: usb_probe_device
[    0.783180] usb usb5: configuration #1 chosen from 1 choice
[    0.783186] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    0.783235] hub 5-0:1.0: usb_probe_interface
[    0.783238] hub 5-0:1.0: usb_probe_interface - got id
[    0.783240] hub 5-0:1.0: USB hub found
[    0.784344] hub 5-0:1.0: 2 ports detected
[    0.785406] hub 5-0:1.0: standalone hub
[    0.785408] hub 5-0:1.0: no power switching (usb 1.0)
[    0.785409] hub 5-0:1.0: individual port over-current protection
[    0.785411] hub 5-0:1.0: power on to power good time: 2ms
[    0.785415] hub 5-0:1.0: local power source is good
[    0.785417] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    0.785435] drivers/usb/core/inode.c: creating file '001'
[    0.785467] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[    0.785482] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.786592] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.786595] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.787676] drivers/usb/core/inode.c: creating file '006'
[    0.787734] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.788829] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.789918] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[    0.789920] uhci_hcd 0000:00:1d.1: Performing full reset
[    0.789939] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[    0.791055] usb usb6: default language 0x0409
[    0.791061] usb usb6: udev 1, busnum 6, minor = 640
[    0.791063] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.792154] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.793239] usb usb6: Product: UHCI Host Controller
[    0.794320] usb usb6: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[    0.795406] usb usb6: SerialNumber: 0000:00:1d.1
[    0.796563] usb usb6: usb_probe_device
[    0.796566] usb usb6: configuration #1 chosen from 1 choice
[    0.796571] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[    0.796622] hub 6-0:1.0: usb_probe_interface
[    0.796624] hub 6-0:1.0: usb_probe_interface - got id
[    0.796626] hub 6-0:1.0: USB hub found
[    0.797724] hub 6-0:1.0: 2 ports detected
[    0.798797] hub 6-0:1.0: standalone hub
[    0.798799] hub 6-0:1.0: no power switching (usb 1.0)
[    0.798801] hub 6-0:1.0: individual port over-current protection
[    0.798803] hub 6-0:1.0: power on to power good time: 2ms
[    0.798806] hub 6-0:1.0: local power source is good
[    0.798808] hub 6-0:1.0: trying to enable port power on non-switchable hub
[    0.798825] drivers/usb/core/inode.c: creating file '001'
[    0.798858] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[    0.798873] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.799969] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.799972] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.801055] drivers/usb/core/inode.c: creating file '007'
[    0.801108] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.802204] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.803295] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[    0.803297] uhci_hcd 0000:00:1d.2: Performing full reset
[    0.803316] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
[    0.804438] usb usb7: default language 0x0409
[    0.804443] usb usb7: udev 1, busnum 7, minor = 768
[    0.804446] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.805543] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.806629] usb usb7: Product: UHCI Host Controller
[    0.807705] usb usb7: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[    0.808789] usb usb7: SerialNumber: 0000:00:1d.2
[    0.809938] usb usb7: usb_probe_device
[    0.809941] usb usb7: configuration #1 chosen from 1 choice
[    0.809947] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[    0.809998] hub 7-0:1.0: usb_probe_interface
[    0.810000] hub 7-0:1.0: usb_probe_interface - got id
[    0.810013] hub 7-0:1.0: USB hub found
[    0.811089] hub 7-0:1.0: 2 ports detected
[    0.812149] hub 7-0:1.0: standalone hub
[    0.812151] hub 7-0:1.0: no power switching (usb 1.0)
[    0.812153] hub 7-0:1.0: individual port over-current protection
[    0.812155] hub 7-0:1.0: power on to power good time: 2ms
[    0.812158] hub 7-0:1.0: local power source is good
[    0.812160] hub 7-0:1.0: trying to enable port power on non-switchable hub
[    0.812179] drivers/usb/core/inode.c: creating file '001'
[    0.812210] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[    0.812233] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.813332] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.813335] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.814421] drivers/usb/core/inode.c: creating file '008'
[    0.814488] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.815590] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.816680] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[    0.816682] uhci_hcd 0000:00:1d.3: Performing full reset
[    0.816709] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001403 0  ACK POWER sig=k CSC CONNECT
[    0.816712] hub 1-0:1.0: port 3: status 0501 change 0001
[    0.816740] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
[    0.817846] usb usb8: default language 0x0409
[    0.817852] usb usb8: udev 1, busnum 8, minor = 896
[    0.817854] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.818958] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.820053] usb usb8: Product: UHCI Host Controller
[    0.821136] usb usb8: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[    0.822215] usb usb8: SerialNumber: 0000:00:1d.3
[    0.823363] usb usb8: usb_probe_device
[    0.823366] usb usb8: configuration #1 chosen from 1 choice
[    0.823372] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[    0.823424] hub 8-0:1.0: usb_probe_interface
[    0.823426] hub 8-0:1.0: usb_probe_interface - got id
[    0.823428] hub 8-0:1.0: USB hub found
[    0.824515] hub 8-0:1.0: 2 ports detected
[    0.825602] hub 8-0:1.0: standalone hub
[    0.825604] hub 8-0:1.0: no power switching (usb 1.0)
[    0.825605] hub 8-0:1.0: individual port over-current protection
[    0.825607] hub 8-0:1.0: power on to power good time: 2ms
[    0.825611] hub 8-0:1.0: local power source is good
[    0.825613] hub 8-0:1.0: trying to enable port power on non-switchable hub
[    0.825633] drivers/usb/core/inode.c: creating file '001'
[    0.825669] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
[    0.825718] Initializing USB Mass Storage driver...
[    0.826847] usbcore: registered new interface driver usb-storage
[    0.827936] USB Mass Storage support registered.
[    0.829072] usbcore: registered new interface driver libusual
[    0.830260] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.843235] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000
[    0.845870] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.847000] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.848289] mousedev: PS/2 mouse device common for all mice
[    0.849717] rtc_cmos 00:04: RTC can wake from S4
[    0.850905] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.852038] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.853206] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.854658] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@...
[    0.856074] cpuidle: using governor ladder
[    0.857465] cpuidle: using governor menu
[    0.858624] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.859506] usbcore: registered new interface driver usbhid
[    0.860667] usbhid: USB HID core driver
[    0.861804] ieee80211_crypt: registered algorithm 'NULL'
[    0.861806] ieee80211_crypt: registered algorithm 'TKIP'
[    0.861808] ieee80211_crypt: registered algorithm 'CCMP'
[    0.861810] ieee80211_crypt: registered algorithm 'WEP'
[    0.861819] 
[    0.861820] Linux kernel driver for RTL8192 based WLAN cards
[    0.864109] Copyright (c) 2007-2008, Realsil Wlan
[    0.865762] input: HP WMI hotkeys as /devices/virtual/input/input4
[    0.867627] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.868922] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    0.868964] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.872040] uhci_hcd 0000:00:1a.1: port 1 portsc 008a,00
[    0.881034] hda_codec: ALC270: BIOS auto-probing.
[    0.885163] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.885991] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    0.887328] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    0.889202] ALSA device list:
[    0.890440]   #0: HDA Intel at 0x94500000 irq 22
[    0.892563] Netfilter messages via NETLINK v0.30.
[    0.893825] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    0.895251] ctnetlink v0.93: registering with nfnetlink.
[    0.898057] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.898204] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.899487] TCP cubic registered
[    0.900710] Initializing XFRM netlink socket
[    0.902200] NET: Registered protocol family 10
[    0.905816] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.907103] IPv6 over IPv4 tunneling driver
[    0.908877] NET: Registered protocol family 17
[    0.911252] Registering the dns_resolver key type
[    0.912498] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.912709] PM: Hibernation image not present or could not be loaded.
[    0.912715] registered taskstats version 1
[    0.914264]   Magic number: 11:677:209
[    0.916414] hub 1-0:1.0: state 7 ports 4 chg 0008 evt 0000
[    0.916421] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[    0.916430] ehci_hcd 0000:00:1a.7: port 3 low speed --> companion
[    0.916481] power_supply ACAD: hash matches
[    0.967025] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003002 0  ACK POWER OWNER sig=se0 CSC
[    0.967044] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0008
[    0.967049] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.972556] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.973023] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
[    0.973030] uhci_hcd 0000:00:1a.1: port 1 portsc 01a3,00
[    0.973036] hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[    1.077027] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[    1.138030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.140246] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OCA1G, max UDMA/100
[    1.141505] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.143896] ata1.00: configured for UDMA/100
[    1.145255] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
[    1.146747] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.148041] sd 0:0:0:0: [sda] Write Protect is off
[    1.149291] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.149312] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.150901] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.179030] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    1.186793]  sda: sda1 sda2 sda3
[    1.188418] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.321491] usb 4-1: skipped 1 descriptor after interface
[    1.326490] usb 4-1: default language 0x0409
[    1.346491] usb 4-1: udev 2, busnum 4, minor = 385
[    1.346493] usb 4-1: New USB device found, idVendor=045e, idProduct=00e1
[    1.347794] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.349073] usb 4-1: Product: Microsoft Notebook Receiver v2.0
[    1.350392] usb 4-1: Manufacturer: Microsoft
[    1.351763] usb 4-1: usb_probe_device
[    1.351766] usb 4-1: configuration #1 chosen from 1 choice
[    1.354491] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[    1.354546] usbhid 4-1:1.0: usb_probe_interface
[    1.354548] usbhid 4-1:1.0: usb_probe_interface - got id
[    1.406104] input: Microsoft Microsoft Notebook Receiver v2.0 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input8
[    1.407618] generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Receiver v2.0] on usb-0000:00:1a.1-1/input0
[    1.409035] drivers/usb/core/inode.c: creating file '002'
[    1.409064] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
[    1.612029] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.617110] ata2.00: ATAPI: hp      DVDRAM GT31L, mP01, max UDMA/100
[    1.623397] ata2.00: configured for UDMA/100
[    1.628073] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT31L     mP01 PQ: 0 ANSI: 5
[    1.634292] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.635692] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.638699] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.638818] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.946029] ata5: SATA link down (SStatus 0 SControl 300)
[    1.954027] usb usb3: suspend_rh (auto-stop)
[    1.954050] usb usb5: suspend_rh (auto-stop)
[    1.954072] usb usb6: suspend_rh (auto-stop)
[    1.954094] usb usb7: suspend_rh (auto-stop)
[    1.954116] usb usb8: suspend_rh (auto-stop)
[    1.990122] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0xa0400
[    2.067124] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[    2.252048] ata6: SATA link down (SStatus 0 SControl 300)
[    2.279645] EXT3-fs: barriers not enabled
[    2.298828] kjournald starting.  Commit interval 5 seconds
[    2.300308] EXT3-fs (sda3): mounted filesystem with writeback data mode
[    2.301732] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[    2.304716] Freeing unused kernel memory: 588k freed
[    2.306318] Write protecting the kernel read-only data: 8192k
[    2.310222] Freeing unused kernel memory: 540k freed
[    2.312063] Freeing unused kernel memory: 44k freed
[    3.301140] cat used greatest stack depth: 4472 bytes left
[    3.403883] gzip used greatest stack depth: 4072 bytes left
[    3.507380] init-early.sh used greatest stack depth: 3800 bytes left
[    5.465699] udev: starting version 151
[    5.465755] udevd (1155): /proc/1155/oom_adj is deprecated, please use /proc/1155/oom_score_adj instead.
[    5.669406] rtllib_crypt: registered algorithm 'NULL'
[    5.669409] rtllib_crypt: registered algorithm 'TKIP'
[    5.669410] rtllib_crypt: registered algorithm 'CCMP'
[    5.669412] rtllib_crypt: registered algorithm 'WEP'
[    5.669413] 
[    5.669414] Linux kernel driver for RTL8192 based WLAN cards
[    5.669415] Copyright (c) 2007-2008, Realsil Wlan Driver
[    5.669452] rtl819xSE 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.669459] rtl819xSE 0000:02:00.0: setting latency timer to 64
[    5.669576] Memory mapped space start: 0x93500000 
[    5.670213] GetPciBusInfo(): Find Device(10EC:8171)  bus=2 dev=0, func=0
[    5.671094] GetPciBridegInfo : Find Device(8086:2940)  bus=0 dev=28, func=0
[    5.671096] Pci Bridge Vendor is found index: 0
[    5.671098] Pci Bridge Vendor is 8086
[    5.676800] =========>dm_InitRateAdaptiveMask: bUseRAMask=0
[    6.912108] EXT3-fs (sda3): using internal journal
[    8.888890] Adding 4200992k swap on /dev/sda2.  Priority:-1 extents:1 across:4200992k 
[   16.335696] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 8, phase 4, 106 us
[   19.578566] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   19.578569] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   19.578571] HW_VAR_MRC: Turn on 1T1R MRC!
[   19.606997] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.796941] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   19.796944] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   19.796946] HW_VAR_MRC: Turn on 1T1R MRC!
[   25.018794] r8169 0000:03:00.0: eth0: link down
[   25.019216] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.200860] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   27.200863] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   27.200865] HW_VAR_MRC: Turn on 1T1R MRC!
[   29.452063] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   29.452067] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   29.452069] HW_VAR_MRC: Turn on 1T1R MRC!
[   29.456819] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.811324] r8169 0000:03:00.0: eth0: link down
[   29.811606] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.974580] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   29.974584] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   29.974585] HW_VAR_MRC: Turn on 1T1R MRC!
[   30.122310] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   30.122313] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   30.122315] HW_VAR_MRC: Turn on 1T1R MRC!
[   30.123863] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.473382] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   32.473386] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   32.473388] HW_VAR_MRC: Turn on 1T1R MRC!
[   32.534475] Linking with cnc_west,channel:1, qos:1, myHT:1, networkHT:0, mode:4 cur_net.flags:0x40a
[   32.534494] rtllib_associate_procedure_wq(), chan:1
[   32.534497] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   32.544526] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   32.547811] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   32.550340] Association response status code 0xc
[   32.550903] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   32.551191] rtllib_associate_procedure_wq(), chan:1
[   32.551194] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   32.561222] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   32.563492] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   32.570744] Association response status code 0xc
[   32.570759] rtllib_associate_procedure_wq(), chan:1
[   32.570761] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   32.580789] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   32.583141] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   32.585650] Association response status code 0xc
[   32.691024] ============>sync_scan_hurryup out
[   32.691063] rtllib_associate_procedure_wq(), chan:1
[   32.691064] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   32.701089] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   32.701419] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   32.701428] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   32.701456] rtllib_associate_procedure_wq(), chan:1
[   32.701458] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   32.711484] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   32.713316] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   32.716564] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   32.716566] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   32.716568] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   32.716569] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   32.716571] Associated successfully
[   32.716572] normal associate
[   32.716577] Using G rates:108
[   32.716578] Successfully associated, ht not enabled(0, 0)
[   32.716582] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   32.717893] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   32.722978] RX: IEEE802.1X EAPOL frame!
[   32.733850] RX: IEEE802.1X EAPOL frame!
[   32.733930] alg name:CCMP
[   32.733950] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   32.734553] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   32.734560] alg name:TKIP
[   32.738222] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   32.738229] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   32.738833] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   32.738896] disauth packet !
[   37.877142] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   37.877145] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   37.877147] HW_VAR_MRC: Turn on 1T1R MRC!
[   39.320242] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   39.320251] rtllib_associate_procedure_wq(), chan:1
[   39.320253] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   39.330309] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   39.330468] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   39.331080] rtllib_associate_procedure_wq(), chan:1
[   39.331083] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   39.341112] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   39.342961] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   39.345935] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   39.345938] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   39.345939] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   39.345941] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   39.345943] Associated successfully
[   39.345944] normal associate
[   39.345950] Using G rates:108
[   39.345951] Successfully associated, ht not enabled(0, 0)
[   39.345956] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   39.350456] RX: IEEE802.1X EAPOL frame!
[   39.361640] RX: IEEE802.1X EAPOL frame!
[   39.361723] alg name:CCMP
[   39.361741] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   39.362345] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   39.362495] alg name:TKIP
[   39.364393] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   39.364399] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   39.365003] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   39.365072] disauth packet !
[   43.602036] wlan0: no IPv6 routers present
[   44.503210] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   44.503213] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   44.503215] HW_VAR_MRC: Turn on 1T1R MRC!
[   45.946226] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   45.946235] rtllib_associate_procedure_wq(), chan:1
[   45.946237] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   45.956261] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   45.956450] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   45.956838] rtllib_associate_procedure_wq(), chan:1
[   45.956840] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   45.966868] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   45.968340] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   45.973007] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   45.973009] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   45.973011] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   45.973013] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   45.973014] Associated successfully
[   45.973016] normal associate
[   45.973020] Using G rates:108
[   45.973022] Successfully associated, ht not enabled(0, 0)
[   45.973026] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   45.977948] RX: IEEE802.1X EAPOL frame!
[   45.988915] RX: IEEE802.1X EAPOL frame!
[   45.988979] alg name:CCMP
[   45.988996] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   45.989600] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   45.989738] alg name:TKIP
[   45.991609] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   45.991615] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   45.992234] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   45.992278] disauth packet !
[   51.130386] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   51.130389] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   51.130391] HW_VAR_MRC: Turn on 1T1R MRC!
[   52.576990] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   52.577000] rtllib_associate_procedure_wq(), chan:1
[   52.577002] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   52.587048] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   52.587279] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   52.587647] rtllib_associate_procedure_wq(), chan:1
[   52.587650] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   52.597678] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   52.599509] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   52.602438] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   52.602441] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   52.602442] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   52.602444] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   52.602446] Associated successfully
[   52.602447] normal associate
[   52.602452] Using G rates:108
[   52.602453] Successfully associated, ht not enabled(0, 0)
[   52.602458] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   52.605495] RX: IEEE802.1X EAPOL frame!
[   52.617313] RX: IEEE802.1X EAPOL frame!
[   52.617379] alg name:CCMP
[   52.617396] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   52.618000] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   52.618005] alg name:TKIP
[   52.619920] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   52.619926] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   52.620531] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   52.620577] disauth packet !
[   57.758709] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   57.758712] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   57.758714] HW_VAR_MRC: Turn on 1T1R MRC!
[   59.201626] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   59.201636] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   59.201657] rtllib_associate_procedure_wq(), chan:1
[   59.201659] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   59.211689] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   59.216656] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   59.219564] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   59.219567] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   59.219568] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   59.219570] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   59.219572] Associated successfully
[   59.219573] normal associate
[   59.219578] Using G rates:108
[   59.219580] Successfully associated, ht not enabled(0, 0)
[   59.219587] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   59.224931] RX: IEEE802.1X EAPOL frame!
[   59.234262] RX: IEEE802.1X EAPOL frame!
[   59.234332] alg name:CCMP
[   59.234352] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   59.234955] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   59.234961] alg name:TKIP
[   59.236882] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   59.236888] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   59.237494] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   59.237540] disauth packet !
[   64.376000] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   64.376010] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   64.376012] HW_VAR_MRC: Turn on 1T1R MRC!
[   65.819555] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   65.819565] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   65.819587] rtllib_associate_procedure_wq(), chan:1
[   65.819589] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   65.829616] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   65.831459] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   65.834408] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   65.834411] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   65.834413] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   65.834414] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   65.834416] Associated successfully
[   65.834418] normal associate
[   65.834422] Using G rates:108
[   65.834423] Successfully associated, ht not enabled(0, 0)
[   65.834427] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   65.840462] RX: IEEE802.1X EAPOL frame!
[   65.851537] RX: IEEE802.1X EAPOL frame!
[   65.851604] alg name:CCMP
[   65.851622] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   65.852226] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   65.852232] alg name:TKIP
[   65.854161] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   65.854168] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   65.854772] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   65.854817] disauth packet !
[   70.992946] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.992950] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   70.992951] HW_VAR_MRC: Turn on 1T1R MRC!
[   72.440034] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   72.440045] rtllib_associate_procedure_wq(), chan:1
[   72.440047] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   72.450076] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   72.450349] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   72.450720] rtllib_associate_procedure_wq(), chan:1
[   72.450723] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   72.460751] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   72.462223] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   72.466875] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   72.466877] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   72.466879] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   72.466881] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   72.466882] Associated successfully
[   72.466884] normal associate
[   72.466888] Using G rates:108
[   72.466890] Successfully associated, ht not enabled(0, 0)
[   72.466895] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   72.468540] RX: IEEE802.1X EAPOL frame!
[   72.478870] RX: IEEE802.1X EAPOL frame!
[   72.478935] alg name:CCMP
[   72.478952] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   72.479556] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   72.479689] alg name:TKIP
[   72.481561] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   72.481567] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   72.482172] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   72.482219] disauth packet !
[   76.169665] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   76.169669] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   76.169671] HW_VAR_MRC: Turn on 1T1R MRC!
[   79.059149] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   79.059158] rtllib_associate_procedure_wq(), chan:1
[   79.059160] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   79.069189] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   79.069396] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   79.077049] rtllib_associate_procedure_wq(), chan:1
[   79.077052] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   79.087079] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   79.092018] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   79.094932] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   79.094935] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   79.094937] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   79.094939] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   79.094941] Associated successfully
[   79.094942] normal associate
[   79.094949] Using G rates:108
[   79.094950] Successfully associated, ht not enabled(0, 0)
[   79.094955] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   79.096587] RX: IEEE802.1X EAPOL frame!
[   79.106385] RX: IEEE802.1X EAPOL frame!
[   79.106505] alg name:CCMP
[   79.106524] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   79.107129] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   79.107135] alg name:TKIP
[   79.116702] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   79.116709] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   79.117336] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   79.117387] disauth packet !
[   79.266713] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   79.266717] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   79.266719] HW_VAR_MRC: Turn on 1T1R MRC!
[   79.268448] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   79.410931] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   79.410934] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   79.410936] HW_VAR_MRC: Turn on 1T1R MRC!
[   79.434062] r8169 0000:03:00.0: eth0: link down
[   79.434345] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   79.583822] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   79.583825] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   79.583826] HW_VAR_MRC: Turn on 1T1R MRC!
[   79.585601] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   80.590341] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   80.590345] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   80.590347] HW_VAR_MRC: Turn on 1T1R MRC!
[   80.733254] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   80.733258] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   80.733259] HW_VAR_MRC: Turn on 1T1R MRC!
[   80.734786] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   80.759427] r8169 0000:03:00.0: eth0: link down
[   80.759709] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   81.772697] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   81.772700] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   81.772702] HW_VAR_MRC: Turn on 1T1R MRC!
[   81.778708] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   81.785165] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   81.788913] rtllib_associate_procedure_wq(), chan:1
[   81.788917] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   81.798946] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   81.800802] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   81.803325] Association response status code 0xc
[   81.803339] rtllib_associate_procedure_wq(), chan:1
[   81.803340] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   81.813366] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   81.815210] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   81.817721] Association response status code 0xc
[   81.817734] rtllib_associate_procedure_wq(), chan:1
[   81.817735] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   81.827760] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   81.829578] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   81.832098] Association response status code 0xc
[   81.838027] rtllib_associate_procedure_wq(), chan:1
[   81.838028] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   81.848053] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   81.849885] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   81.852426] Association response status code 0xc
[   81.852440] rtllib_associate_procedure_wq(), chan:1
[   81.852442] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   81.862467] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   81.868035] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   81.871257] Association response status code 0xc
[   81.871269] rtllib_associate_procedure_wq(), chan:1
[   81.871271] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   81.881295] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   81.883113] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   81.885649] Association response status code 0xc
[   81.992040] ============>sync_scan_hurryup out
[   81.992091] rtllib_associate_procedure_wq(), chan:1
[   81.992093] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   82.002118] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   82.002432] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   82.002441] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   82.002470] rtllib_associate_procedure_wq(), chan:1
[   82.002472] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   82.012499] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   82.014331] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   82.018124] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   82.018127] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   82.018128] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   82.018130] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   82.018132] Associated successfully
[   82.018133] normal associate
[   82.018138] Using G rates:108
[   82.018139] Successfully associated, ht not enabled(0, 0)
[   82.018144] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   82.019455] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   82.020010] RX: IEEE802.1X EAPOL frame!
[   82.030952] RX: IEEE802.1X EAPOL frame!
[   82.031047] alg name:CCMP
[   82.031064] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   82.031667] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   82.031673] alg name:TKIP
[   82.033610] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   82.033617] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   82.034232] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   82.034295] disauth packet !
[   87.172606] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   87.172610] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   87.172611] HW_VAR_MRC: Turn on 1T1R MRC!
[   88.614199] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   88.614208] rtllib_associate_procedure_wq(), chan:1
[   88.614210] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   88.624235] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   88.624424] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   88.624823] rtllib_associate_procedure_wq(), chan:1
[   88.624826] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   88.634854] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   88.636700] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   88.639630] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   88.639632] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   88.639634] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   88.639636] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   88.639638] Associated successfully
[   88.639639] normal associate
[   88.639644] Using G rates:108
[   88.639646] Successfully associated, ht not enabled(0, 0)
[   88.639650] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   88.647462] RX: IEEE802.1X EAPOL frame!
[   88.658355] RX: IEEE802.1X EAPOL frame!
[   88.658418] alg name:CCMP
[   88.658435] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   88.659040] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   88.659173] alg name:TKIP
[   88.661062] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   88.661068] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   88.661672] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   88.661717] disauth packet !
[   92.994036] wlan0: no IPv6 routers present
[   93.799859] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   93.799862] InitializeAdapter8192SE(): Set MRC settings on as default!!
[   93.799863] HW_VAR_MRC: Turn on 1T1R MRC!
[   95.242213] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   95.242222] rtllib_associate_procedure_wq(), chan:1
[   95.242224] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   95.252251] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   95.252612] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[   95.252620] rtllib_associate_procedure_wq(), chan:1
[   95.252622] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   95.262648] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[   95.264486] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   95.267424] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   95.267426] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   95.267428] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   95.267430] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   95.267432] Associated successfully
[   95.267433] normal associate
[   95.267439] Using G rates:108
[   95.267441] Successfully associated, ht not enabled(0, 0)
[   95.267446] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[   95.274973] RX: IEEE802.1X EAPOL frame!
[   95.285847] RX: IEEE802.1X EAPOL frame!
[   95.285953] alg name:CCMP
[   95.285962] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[   95.286566] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   95.286572] alg name:TKIP
[   95.288531] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[   95.288537] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[   95.289143] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   95.289190] disauth packet !
[  100.427329] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  100.427332] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  100.427334] HW_VAR_MRC: Turn on 1T1R MRC!
[  101.887230] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  101.887240] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  101.892360] rtllib_associate_procedure_wq(), chan:1
[  101.892363] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  101.902393] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  101.904226] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  101.907205] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[  101.907208] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[  101.907209] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[  101.907211] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[  101.907213] Associated successfully
[  101.907214] normal associate
[  101.907220] Using G rates:108
[  101.907222] Successfully associated, ht not enabled(0, 0)
[  101.907226] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  101.912461] RX: IEEE802.1X EAPOL frame!
[  101.923324] RX: IEEE802.1X EAPOL frame!
[  101.923393] alg name:CCMP
[  101.923411] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  101.924016] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  101.924022] alg name:TKIP
[  101.925958] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[  101.925964] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  101.926570] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[  101.926613] disauth packet !
[  107.064751] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  107.064754] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  107.064755] HW_VAR_MRC: Turn on 1T1R MRC!
[  108.507215] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  108.507223] rtllib_associate_procedure_wq(), chan:1
[  108.507225] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  108.517252] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  108.517489] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  108.517914] rtllib_associate_procedure_wq(), chan:1
[  108.517917] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  108.527944] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  108.531266] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  108.534174] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[  108.534176] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[  108.534178] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[  108.534180] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[  108.534182] Associated successfully
[  108.534183] normal associate
[  108.534189] Using G rates:108
[  108.534190] Successfully associated, ht not enabled(0, 0)
[  108.534195] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  108.539949] RX: IEEE802.1X EAPOL frame!
[  108.551054] RX: IEEE802.1X EAPOL frame!
[  108.551151] alg name:CCMP
[  108.551168] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  108.551772] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  108.551778] alg name:TKIP
[  108.553787] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[  108.553794] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  108.554400] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[  108.554446] disauth packet !
[  109.457687] chown used greatest stack depth: 3392 bytes left
[  113.692579] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  113.692582] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  113.692584] HW_VAR_MRC: Turn on 1T1R MRC!
[  115.134221] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  115.134230] rtllib_associate_procedure_wq(), chan:1
[  115.134232] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  115.144257] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  115.144451] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  115.144865] rtllib_associate_procedure_wq(), chan:1
[  115.144868] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  115.154895] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  115.157155] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  115.160109] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[  115.160112] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[  115.160113] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[  115.160115] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[  115.160117] Associated successfully
[  115.160118] normal associate
[  115.160123] Using G rates:108
[  115.160125] Successfully associated, ht not enabled(0, 0)
[  115.160130] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  115.167432] RX: IEEE802.1X EAPOL frame!
[  115.169249] RX: IEEE802.1X EAPOL frame!
[  115.179049] RX: IEEE802.1X EAPOL frame!
[  115.179114] alg name:CCMP
[  115.179133] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  115.179736] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  115.179742] alg name:TKIP
[  115.181689] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[  115.181695] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  115.182301] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[  115.182346] disauth packet !
[  120.320453] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  120.320456] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  120.320458] HW_VAR_MRC: Turn on 1T1R MRC!
[  121.768359] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  121.768368] rtllib_associate_procedure_wq(), chan:1
[  121.768370] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  121.778400] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  121.778628] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  121.782626] rtllib_associate_procedure_wq(), chan:1
[  121.782629] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  121.792659] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  121.794120] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  121.799425] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[  121.799428] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[  121.799430] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[  121.799432] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[  121.799434] Associated successfully
[  121.799435] normal associate
[  121.799442] Using G rates:108
[  121.799444] Successfully associated, ht not enabled(0, 0)
[  121.799450] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  121.804954] RX: IEEE802.1X EAPOL frame!
[  121.815802] RX: IEEE802.1X EAPOL frame!
[  121.815899] alg name:CCMP
[  121.815917] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  121.816521] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  121.816715] alg name:TKIP
[  121.818584] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[  121.818590] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  121.819195] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[  121.819243] disauth packet !
[  126.168469] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  126.168472] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  126.168474] HW_VAR_MRC: Turn on 1T1R MRC!
[  129.058172] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  129.058181] rtllib_associate_procedure_wq(), chan:1
[  129.058183] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  129.068210] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  129.068418] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  129.076028] rtllib_associate_procedure_wq(), chan:1
[  129.076030] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  129.086057] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  129.088010] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  129.091075] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[  129.091077] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[  129.091079] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[  129.091081] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[  129.091083] Associated successfully
[  129.091084] normal associate
[  129.091089] Using G rates:108
[  129.091091] Successfully associated, ht not enabled(0, 0)
[  129.091096] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  129.101796] RX: IEEE802.1X EAPOL frame!
[  129.112031] RX: IEEE802.1X EAPOL frame!
[  129.112110] alg name:CCMP
[  129.112127] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  129.112731] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  129.112737] alg name:TKIP
[  129.125852] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[  129.125858] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  129.126464] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[  129.126510] disauth packet !
[  129.299229] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  129.299232] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  129.299234] HW_VAR_MRC: Turn on 1T1R MRC!
[  129.300714] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  129.443090] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  129.443094] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  129.443095] HW_VAR_MRC: Turn on 1T1R MRC!
[  129.465737] r8169 0000:03:00.0: eth0: link down
[  129.466083] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  129.614874] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  129.614877] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  129.614879] HW_VAR_MRC: Turn on 1T1R MRC!
[  129.616669] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  130.625664] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  130.625668] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  130.625669] HW_VAR_MRC: Turn on 1T1R MRC!
[  130.767971] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  130.767975] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  130.767977] HW_VAR_MRC: Turn on 1T1R MRC!
[  130.769697] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  130.793854] r8169 0000:03:00.0: eth0: link down
[  130.794262] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  131.792910] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  131.792913] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  131.792915] HW_VAR_MRC: Turn on 1T1R MRC!
[  131.798844] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  131.805081] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  131.808727] rtllib_associate_procedure_wq(), chan:1
[  131.808731] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  131.818761] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  131.820616] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  131.823157] Association response status code 0xc
[  131.823171] rtllib_associate_procedure_wq(), chan:1
[  131.823173] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  131.833198] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  131.835042] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  131.837551] Association response status code 0xc
[  131.837565] rtllib_associate_procedure_wq(), chan:1
[  131.837567] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  131.847591] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  131.849422] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  131.851947] Association response status code 0xc
[  131.851960] rtllib_associate_procedure_wq(), chan:1
[  131.851962] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  131.861986] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  131.865868] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  131.868378] Association response status code 0xc
[  131.868391] rtllib_associate_procedure_wq(), chan:1
[  131.868393] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  131.878417] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  131.880263] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  131.882782] Association response status code 0xc
[  131.882794] rtllib_associate_procedure_wq(), chan:1
[  131.882796] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  131.892820] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  131.895870] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  131.898377] Association response status code 0xc
[  132.004023] ============>sync_scan_hurryup out
[  132.004079] rtllib_associate_procedure_wq(), chan:1
[  132.004081] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  132.014106] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  132.014441] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  132.014449] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  132.014480] rtllib_associate_procedure_wq(), chan:1
[  132.014482] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  132.024508] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  132.026338] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  132.029274] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[  132.029276] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[  132.029278] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[  132.029280] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[  132.029281] Associated successfully
[  132.029282] normal associate
[  132.029287] Using G rates:108
[  132.029288] Successfully associated, ht not enabled(0, 0)
[  132.029293] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  132.030604] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  132.035628] RX: IEEE802.1X EAPOL frame!
[  132.046477] RX: IEEE802.1X EAPOL frame!
[  132.046561] alg name:CCMP
[  132.046578] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  132.047183] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  132.047189] alg name:TKIP
[  132.049153] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[  132.049160] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  132.049764] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[  132.049825] disauth packet !
[  137.188130] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  137.188134] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  137.188136] HW_VAR_MRC: Turn on 1T1R MRC!
[  138.631221] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  138.631231] rtllib_associate_procedure_wq(), chan:1
[  138.631232] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  138.641259] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  138.641477] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  138.641879] rtllib_associate_procedure_wq(), chan:1
[  138.641882] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  138.651911] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  138.654448] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  138.657420] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[  138.657422] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[  138.657424] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[  138.657426] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[  138.657428] Associated successfully
[  138.657429] normal associate
[  138.657434] Using G rates:108
[  138.657435] Successfully associated, ht not enabled(0, 0)
[  138.657440] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  138.663102] RX: IEEE802.1X EAPOL frame!
[  138.675091] RX: IEEE802.1X EAPOL frame!
[  138.675159] alg name:CCMP
[  138.675176] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  138.675779] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  138.675785] alg name:TKIP
[  138.677745] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[  138.677752] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  138.678357] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[  138.678403] disauth packet !
[  142.722039] wlan0: no IPv6 routers present
[  143.816553] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  143.816556] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  143.816558] HW_VAR_MRC: Turn on 1T1R MRC!
[  145.259207] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  145.259216] rtllib_associate_procedure_wq(), chan:1
[  145.259218] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  145.269242] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  145.269456] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  145.269846] rtllib_associate_procedure_wq(), chan:1
[  145.269848] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  145.279876] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  145.281725] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  145.284653] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[  145.284655] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[  145.284657] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[  145.284659] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[  145.284661] Associated successfully
[  145.284662] normal associate
[  145.284667] Using G rates:108
[  145.284668] Successfully associated, ht not enabled(0, 0)
[  145.284672] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  145.290596] RX: IEEE802.1X EAPOL frame!
[  145.301507] RX: IEEE802.1X EAPOL frame!
[  145.301573] alg name:CCMP
[  145.301590] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  145.302194] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  145.302326] alg name:TKIP
[  145.304200] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[  145.304206] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  145.304810] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[  145.304852] disauth packet !
[  150.442996] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  150.442999] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  150.443008] HW_VAR_MRC: Turn on 1T1R MRC!
[  151.890537] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  151.890547] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[  151.890569] rtllib_associate_procedure_wq(), chan:1
[  151.890571] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  151.900600] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  151.902435] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  151.905379] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[  151.905382] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[  151.905384] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[  151.905386] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[  151.905388] Associated successfully
[  151.905389] normal associate
[  151.905396] Using G rates:108
[  151.905397] Successfully associated, ht not enabled(0, 0)
[  151.905403] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  151.909579] RX: IEEE802.1X EAPOL frame!
[  151.919598] RX: IEEE802.1X EAPOL frame!
[  151.919708] alg name:CCMP
[  151.919717] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[  151.920322] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  151.920328] alg name:TKIP
[  151.923822] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[  151.923829] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[  151.924434] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[  151.924482] disauth packet !
[  153.441581] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  153.441584] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  153.441586] HW_VAR_MRC: Turn on 1T1R MRC!
[  153.584662] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  153.584665] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  153.584667] HW_VAR_MRC: Turn on 1T1R MRC!
[  153.585318] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  153.612006] r8169 0000:03:00.0: eth0: link down
[  153.612408] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  153.790968] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  153.790971] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  153.790973] HW_VAR_MRC: Turn on 1T1R MRC!
[  153.797718] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  153.950030] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  153.950034] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  153.950035] HW_VAR_MRC: Turn on 1T1R MRC!
[  154.105461] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  154.105465] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  154.105467] HW_VAR_MRC: Turn on 1T1R MRC!
[  154.116525] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  154.141138] r8169 0000:03:00.0: eth0: link down
[  154.141422] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  156.259289] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  156.259292] InitializeAdapter8192SE(): Set MRC settings on as default!!
[  156.259294] HW_VAR_MRC: Turn on 1T1R MRC!
[  156.266459] Linking with linuxisbroken,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40b
[  156.266472] rtllib_associate_procedure_wq(), chan:1
[  156.266474] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  156.276503] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[  156.278344] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  156.281187] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[  156.281190] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[  156.281192] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[  156.281194] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[  156.281196] Associated successfully
[  156.281197] normal associate
[  156.281204] Using G rates:108
[  156.281205] Successfully associated, ht not enabled(0, 0)
[  156.281210] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[  156.282486] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  156.419822] DHCP pkt src port:68, dest port:67!!
[  158.176001] dm_check_edca_turbo():iot peer is unknown, bssid:9a:fc:11:47:d3:65
[  158.664499] DHCP pkt src port:68, dest port:67!!
[  166.698020] wlan0: no IPv6 routers present
Replies:
Re: Wireless Authentication Failure -- WPA2-PSK(TKIP+AES), rtl8192se
-- Lie Ryan
Navigation:
Lists: gentoo-laptop: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
mounts options on a laptop
Next by thread:
Re: Wireless Authentication Failure -- WPA2-PSK(TKIP+AES), rtl8192se
Previous by date:
Unsubscribe
Next by date:
Re: Wireless Authentication Failure -- WPA2-PSK(TKIP+AES), rtl8192se


Updated Jun 19, 2012

Summary: Archive of the gentoo-laptop mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.