Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-mips
Navigation:
Lists: gentoo-mips: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: gentoo-mips@g.o
From: Arianna Arona <arianna@...>
Subject: Re: Gentoo/MIPS SGI LiveCD RC5 release
Date: Fri, 28 Oct 2005 12:06:00 +0200
On Thursday 20 October 2005 06:15, Kumba wrote:
> After lots of tinkering, testing and other odd n' ends, I released on
> Tuesday a new revision of the SGI LiveCD.  Like its predecessor, RC4, this
> is a single CD that will boot and bring up several completely different SGI
> systems to a state where an install can be started.
[...]
> Most notably, the SGI Origin (IP27) series.

Hi,
what a wonderfull news!!
But I have always the same problem with IOC3 ethernet card.
The kernel included in this new live cd detect the mac address and all network 
parameters (full duplex, 100Mb), but...... network doesn't work: Rx led 
blinks but Tx doesn't. No bits are sent along the cable and after some hour I 
have a RX buffer overflow.

May this output be usefull?

livecd root # lspci -x -vv -s 00:02.0
0000:00:02.0 Class ff00: Silicon Graphics, Inc. IOC3 I/O controller (rev 01)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 255
        Interrupt: pin ? routed to IRQ 2
        Region 0: Memory at 08600000 (32-bit, non-prefetchable) [size=1M]
00: a9 10 03 00 46 01 80 02 01 00 00 ff 00 ff 00 00
10: 00 00 60 08 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

livecd root # lspci -xxx -vv -s 00:02.0
0000:00:02.0 Class ff00: Silicon Graphics, Inc. IOC3 I/O controller (rev 01)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 255
        Interrupt: pin ? routed to IRQ 2
        Region 0: Memory at 08600000 (32-bit, non-prefetchable) [size=1M]
00: a9 10 03 00 46 01 80 02 01 00 00 ff 00 ff 00 00
10: 00 00 60 08 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 56 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


Thank you for any help.

A.

 
-- 
Arianna Arona
Servizi Informatici
Dipartimento di Scienze dell'Informazione
Via Comelico 39
20135 Milano

-- 
gentoo-mips@g.o mailing list


Replies:
Re: Gentoo/MIPS SGI LiveCD RC5 release
-- Kumba
References:
Gentoo/MIPS SGI LiveCD RC5 release
-- Kumba
Navigation:
Lists: gentoo-mips: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
Gentoo/MIPS SGI LiveCD RC5 release
Next by thread:
Re: Gentoo/MIPS SGI LiveCD RC5 release
Previous by date:
Gentoo/MIPS SGI LiveCD RC5 release
Next by date:
Re: Gentoo/MIPS SGI LiveCD RC5 release


Updated Jun 17, 2009

Summary: Archive of the gentoo-mips mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.