Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-ppc-user
Navigation:
Lists: gentoo-ppc-user: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: gentoo-ppc-user@g.o
From: David B?langer <dbelan2@...>
Subject: Re: newbie help with emerge --update --deep --newuse world
Date: Wed, 2 Aug 2006 21:40:17 -0400
Hi Daryl,

The builds fail.  Could be a bug in Gentoo, a misconfiguration, etc.
I do not have the answer of what is going on wrong in this case,
maybe someone else will know.

I will do the following suggestions though.

1) Remove ~ppc64 from your keywords or try the glibc marked stable
(ppc64).  ~ppc64 denotes the testing versions.  If you are new, you
might want to go with the stable version for most packages, they
have been slightly tested better.

2) You can always skip glibc for now and install the other packages.
With:
emerge -av --oneshot pkg1 pkg2 ...
you will be able to merge pkg1 pkg2 ...
--oneshot will prevent them from being recorded in the world file.
If there is a build bug for glibc, it might be fixed some time soon.
Check bugs.gentoo.org and forums.gentoo.org for info too.

Welcome to the Gentoo world and good luck with this problem.

David



On Wed, Aug 02, 2006 at 12:36:37PM -0700, Daryl P. Williams wrote:
> dear gentoo people,
> 
> i am trying to migrate to gentoo ppc64 from osx tiger.  unfortunately i 
> have run myself
> into some problems, probably due to my own newbiness and unfamiliarity's 
> with gentoo.
> i was trying to do a:
> 
> emerge --update --deep --newuse world
> 
> as described in the gentoo handbook.  when it stopped with a complaint 
> about a conflict
> between the pam-login and shadow packages.  i made the mistake of 
> unmerging pam-login
> and now i can only access the system by booting the kernel with the arg: 
> init="/bin/bash".
> however after removing the above conflict the build continued, but 
> eventually stopped
> with another problem, which i don't have a clue where to begin - except 
> here on the
> list. and so i am hoping you gracious and patient folks might be willing 
> to lend a
> helping hand to someone trying to make the move from osx to gentoo.
> and so with that hope i hand,  i now present you with the details:
> 
> the system is a 2 CPU PPC G5, w/internal SATA drive, and a 20" 
> CinemaDisplay.
> 
> my make.conf includes the following USE definition:
> 
> USE="-unicode -gnome -gtk kde qt gtk2 hal"
> 
> i added the -unicode because i was having trouble building the audacity 
> program
> which complained about wxWidgets (or something) needing to be re-emerged
> w/out unicode, and after trying a local package USE="-unicode" which 
> wouldn't
> work,  i decided to try adding it to the make.conf. my ultimate goal is 
> to set up an
> audio/recording system.
> 
> i have included below the output from emerge --info as well as the 
> broken make.
> again, thanks for your patience, and if i need to supply any other 
> information please
> let me know.
> 
> thanks,
> 
> daryl
> daryl at weblane dot com
> 
> 
> emerge --info:
> 
> Gentoo Base System version 1.6.14
> Portage 2.1.1_pre4 (default-linux/ppc/ppc64/2006.0/64bit-userland, 
> gcc-3.4.4/vanilla, glibc-2.3.4.20041102-r2, 2.6.17-gentoo-r4tochtli-01 
> ppc64)
> =================================================================
> System uname: 2.6.17-gentoo-r4tochtli-01 ppc64 unknown
> app-admin/eselect-compiler: 2.0.0_rc2-r1
> dev-lang/python:     2.4.3-r1
> dev-python/pycrypto: 2.0.1-r5
> dev-util/ccache:     [Not Present]
> dev-util/confcache:  [Not Present]
> sys-apps/sandbox:    1.2.18.1
> sys-devel/autoconf:  2.13, 2.60
> sys-devel/automake:  1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2
> sys-devel/binutils:  2.17
> sys-devel/gcc-config: 2.0.0_rc1
> sys-devel/libtool:   1.5.22
> virtual/os-headers:  2.6.16
> ACCEPT_KEYWORDS="ppc64 ~ppc64"
> AUTOCLEAN="yes"
> CBUILD="powerpc64-unknown-linux-gnu"
> CFLAGS="-O2 -pipe -mtune=970 -mcpu=970 -maltivec -mabi=altivec"
> CHOST="powerpc64-unknown-linux-gnu"
> CONFIG_PROTECT=""
> CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf"
> CXXFLAGS="-O2 -pipe -mtune=970 -mcpu=970 -maltivec -mabi=altivec"
> DISTDIR="/usr/portage/distfiles"
> FEATURES="autoconfig distlocks metadata-transfer sandbox sfperms strict"
> GENTOO_MIRRORS="http://distro.ibiblio.org/pub/linux/distributions/gentoo/ 
> http://ftp.ucsb.edu/pub/mirrors/linux/gentoo/ 
> http://gentoo.cites.uiuc.edu/pub/gentoo/ http://gentoo.osuosl.org/ "
> MAKEOPTS="-j3"
> PKGDIR="/usr/portage/packages"
> PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times 
> --compress --force --whole-file --delete --delete-after --stats 
> --timeout=180 --exclude='/distfiles' --exclude='/local' 
> --exclude='/packages'"
> PORTAGE_TMPDIR="/var/tmp"
> PORTDIR="/usr/portage"
> SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage"
> USE="ppc64 X alsa apache2 apm arts berkdb bitmap-fonts cdr cli cups 
> dlloader dri dvd eds emboss encode esd foomaticdb fortran gdbm gif gpm 
> gstreamer gtk2 hal ibm imlib ipv6 isdnlog jpeg kde libg++ libwww mad 
> mikmod motif mp3 mpeg ncurses nls nptl nptlonly ogg opengl oss pam pcre 
> pdflib perl png pppd python qt qt3 qt4 quicktime readline reflection sdl 
> session spell spl ssl tcpd truetype truetype-fonts type1-fonts udev 
> vorbis xml xmms xorg xv zlib elibc_glibc input_devices_keyboard 
> input_devices_mouse kernel_linux userland_GNU"
> Unset:  CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, 
> LDFLAGS, LINGUAS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
> 
> 
> 
> make output:
> 
> ../include/sys/uio.h:5: warning: `altivec' attribute ignored
> ../include/sys/uio.h:7: warning: `altivec' attribute ignored
> ../include/sys/uio.h:9: warning: `altivec' attribute ignored
> ../include/sys/uio.h:11: warning: `altivec' attribute ignored
> powerpc64-unknown-linux-gnu-gcc printf_fp.c -c -std=gnu99 -O2 -Wall 
> -Winline -Wwrite-strings -fmerge-all-constants -mcpu=970 -mtune=970 
> -pipe -mnew-mnemonics -Wstrict-prototypes -mlong-double-128  -fpic    
> -I../include 
> -I/var/tmp/portage/glibc-2.4-r3/work/build-ppc64-powerpc64-unknown-linux-gnu-nptl/stdio-common 
> -I/var/tmp/portage/glibc-2.4-r3/work/build-ppc64-powerpc64-unknown-linux-gnu-nptl 
> -I../sysdeps/powerpc/powerpc64/elf -I../sysdeps/powerpc/elf 
> -I../sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu 
> -I../sysdeps/powerpc/powerpc64/fpu 
> -I../nptl/sysdeps/unix/sysv/linux/powerpc/powerpc64 
> -I../sysdeps/unix/sysv/linux/powerpc/powerpc64 
> -I../sysdeps/unix/sysv/linux/wordsize-64 
> -I../nptl/sysdeps/unix/sysv/linux/powerpc 
> -I../powerpc-cpu/sysdeps/unix/sysv/linux/powerpc 
> -I../sysdeps/unix/sysv/linux/powerpc -I../sysdeps/ieee754/ldbl-128ibm 
> -I../sysdeps/ieee754/ldbl-opt -I../ports/sysdeps/unix/sysv/linux 
> -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread 
> -I../sysdeps/pthread -I../powerpc-cpu/sysdeps/unix/sysv/linux 
> -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common 
> -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../ports/sysdeps/unix/sysv 
> -I../nptl/sysdeps/unix/sysv -I../powerpc-cpu/sysdeps/unix/sysv 
> -I../sysdeps/unix/sysv -I../sysdeps/unix/powerpc -I../ports/sysdeps/unix 
> -I../nptl/sysdeps/unix -I../powerpc-cpu/sysdeps/unix -I../sysdeps/unix 
> -I../sysdeps/posix -I../powerpc-cpu/sysdeps/powerpc/powerpc64/970 
> -I../powerpc-cpu/sysdeps/powerpc/powerpc64/power4 
> -I../powerpc-cpu/sysdeps/powerpc/powerpc64 
> -I../sysdeps/powerpc/powerpc64 -I../sysdeps/wordsize-64 
> -I../sysdeps/powerpc/fpu -I../ports/sysdeps/powerpc 
> -I../nptl/sysdeps/powerpc -I../powerpc-cpu/sysdeps/powerpc 
> -I../sysdeps/powerpc -I../sysdeps/ieee754/dbl-64 
> -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 
> -I../sysdeps/generic/elf -I../sysdeps/generic -I../ports -I../nptl 
> -I../powerpc-cpu  -I.. -I../libio -I. -nostdinc -isystem 
> /usr/lib/gcc/powerpc64-unknown-linux-gnu/3.4.4/include -isystem 
> /usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h  -DPIC 
> -DSHARED     -D_IO_MTSAFE_IO -o 
> /var/tmp/portage/glibc-2.4-r3/work/build-ppc64-powerpc64-unknown-linux-gnu-nptl/stdio-common/printf_fp.os 
> -MD -MP -MF 
> /var/tmp/portage/glibc-2.4-r3/work/build-ppc64-powerpc64-unknown-linux-gnu-nptl/stdio-common/printf_fp.os.dt 
> -MT 
> /var/tmp/portage/glibc-2.4-r3/work/build-ppc64-powerpc64-unknown-linux-gnu-nptl/stdio-common/printf_fp.os
> In file included from ../socket/sys/socket.h:27,
>                 from ../include/sys/socket.h:2,
>                 from ../inet/netinet/in.h:24,
>                 from ../include/netinet/in.h:3,
>                 from ../resolv/resolv.h:57,
>                 from ../include/resolv.h:12,
>                 from ../nptl/descr.h:39,
>                 from ../nptl/sysdeps/powerpc/tls.h:66,
>                 from ../include/tls.h:6,
>                 from ../include/errno.h:22,
>                 from ../libio/libioP.h:29,
>                 from printf_fp.c:25:
> ../include/sys/uio.h:5: warning: `altivec' attribute ignored
> ../include/sys/uio.h:7: warning: `altivec' attribute ignored
> ../include/sys/uio.h:9: warning: `altivec' attribute ignored
> ../include/sys/uio.h:11: warning: `altivec' attribute ignored
> In file included from ../socket/sys/socket.h:27,
>                 from ../include/sys/socket.h:2,
>                 from ../inet/netinet/in.h:24,
>                 from ../include/netinet/in.h:3,
>                 from ../resolv/resolv.h:57,
>                 from ../include/resolv.h:12,
>                 from ../nptl/descr.h:39,
>                 from ../nptl/sysdeps/powerpc/tls.h:66,
>                 from ../include/tls.h:6,
>                 from ../nptl/sysdeps/pthread/bits/libc-lock.h:36,
>                 from ../nptl/sysdeps/pthread/bits/stdio-lock.h:23,
>                 from ../libio/libio.h:171,
>                 from ../include/libio.h:1,
>                 from ../libio/stdio.h:72,
>                 from ../include/stdio.h:5,
>                 from ../sysdeps/posix/cuserid.c:20:
> ../include/sys/uio.h:5: warning: `altivec' attribute ignored
> ../include/sys/uio.h:7: warning: `altivec' attribute ignored
> ../include/sys/uio.h:9: warning: `altivec' attribute ignored
> ../include/sys/uio.h:11: warning: `altivec' attribute ignored
> powerpc64-unknown-linux-gnu-gcc reg-printf.c -c -std=gnu99 -O2 -Wall 
> -Winline -Wwrite-strings -fmerge-all-constants -mcpu=970 -mtune=970 
> -pipe -mnew-mnemonics -Wstrict-prototypes -mlong-double-128  -fpic    
> -I../include 
> -I/var/tmp/portage/glibc-2.4-r3/work/build-ppc64-powerpc64-unknown-linux-gnu-nptl/stdio-common 
> -I/var/tmp/portage/glibc-2.4-r3/work/build-ppc64-powerpc64-unknown-linux-gnu-nptl 
> -I../sysdeps/powerpc/powerpc64/elf -I../sysdeps/powerpc/elf 
> -I../sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu 
> -I../sysdeps/powerpc/powerpc64/fpu 
> -I../nptl/sysdeps/unix/sysv/linux/powerpc/powerpc64 
> -I../sysdeps/unix/sysv/linux/powerpc/powerpc64 
> -I../sysdeps/unix/sysv/linux/wordsize-64 
> -I../nptl/sysdeps/unix/sysv/linux/powerpc 
> -I../powerpc-cpu/sysdeps/unix/sysv/linux/powerpc 
> -I../sysdeps/unix/sysv/linux/powerpc -I../sysdeps/ieee754/ldbl-128ibm 
> -I../sysdeps/ieee754/ldbl-opt -I../ports/sysdeps/unix/sysv/linux 
> -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread 
> -I../sysdeps/pthread -I../powerpc-cpu/sysdeps/unix/sysv/linux 
> -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common 
> -I../sysdeps/unix/mman -I../sysddaryl@sierraos:/home/daryl:(102)% view !$
> view DEBUG
> 
> {standard input}:674: Error: expression too complex
> {standard input}:675: Error: can't resolve `.L524' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:675: Error: expression too complex
> {standard input}:676: Error: can't resolve `.L525' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:676: Error: expression too complex
> {standard input}:677: Error: can't resolve `.L526' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:677: Error: expression too complex
> {standard input}:678: Error: can't resolve `.L527' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:678: Error: expression too complex
> {standard input}:679: Error: can't resolve `.L528' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:679: Error: expression too complex
> {standard input}:680: Error: can't resolve `.L529' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:680: Error: expression too complex
> {standard input}:681: Error: can't resolve `.L530' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:681: Error: expression too complex
> {standard input}:682: Error: can't resolve `.L531' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:682: Error: expression too complex
> {standard input}:683: Error: can't resolve `.L532' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:683: Error: expression too complex
> {standard input}:684: Error: can't resolve `.L533' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:684: Error: expression too complex
> {standard input}:685: Error: can't resolve `.L534' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:685: Error: expression too complex
> {standard input}:686: Error: can't resolve `.L535' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:686: Error: expression too complex
> {standard input}:687: Error: can't resolve `.L522' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:687: Error: expression too complex
> {standard input}:688: Error: can't resolve `.L522' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:688: Error: expression too complex
> {standard input}:689: Error: can't resolve `.L522' {*UND* section} - 
> `.L98' {*UND* section}
> {standard input}:689: Error: expression too complex
> In file included from ../socket/sys/socket.h:27,
>                 from ../include/sys/socket.h:2,
>                 from ../inet/netinet/in.h:24,
>                 from ../include/netinet/in.h:3,
>                 from ../resolv/resolv.h:57,
>                 from ../include/resolv.h:12,
>                 from ../nptl/descr.h:39,
>                 from ../nptl/sysdeps/powerpc/tls.h:66,
>                 from ../include/tls.h:6,
>                 from ../include/errno.h:22,
>                 from vfscanf.c:21:
> ../include/sys/uio.h:5: warning: `altivec' attribute ignored
> ../include/sys/uio.h:7: warning: `altivec' attribute ignored
> ../include/sys/uio.h:9: warning: `altivec' attribute ignored
> ../include/sys/uio.h:11: warning: `altivec' attribute ignored
> Preprocessed source stored into 
> /var/tmp/portage/glibc-2.4-r3/temp/ccusn5JW.out file, please attach this 
> to your bugreport.
> make[2]: *** 
> [/var/tmp/portage/glibc-2.4-r3/work/build-ppc64-powerpc64-unknown-linux-gnu-nptl/stdio-common/vfwprintf.os] 
> Error 1
> make[1]: *** [stdio-common/subdir_lib] Error 2
> make[1]: Leaving directory `/var/tmp/portage/glibc-2.4-r3/work/glibc-2.4'
> make: *** [all] Error 2
> 
> !!! ERROR: sys-libs/glibc-2.4-r3 failed.
> Call stack:
>  ebuild.sh, line 1545:   Called dyn_compile
>  ebuild.sh, line 940:   Called src_compile
>  glibc-2.4-r3.ebuild, line 1179:   Called toolchain-glibc_src_compile
>  glibc-2.4-r3.ebuild, line 253:   Called die
> 
> !!! make for ppc64 failed
> !!! If you need support, post the topmost build error, and the call 
> stack if relevant.
> 
> -- 
> gentoo-ppc-user@g.o mailing list
> 

-- 

---

David B?langer
Web page:   http://www.cs.mcgill.ca/~dbelan2/
Public key: http://www.cs.mcgill.ca/~dbelan2/public_key.txt

-- 
gentoo-ppc-user@g.o mailing list


References:
newbie help with emerge --update --deep --newuse world
-- Daryl P. Williams
Navigation:
Lists: gentoo-ppc-user: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
newbie help with emerge --update --deep --newuse world
Next by thread:
Re: newbie help with emerge --update --deep --newuse world
Previous by date:
newbie help with emerge --update --deep --newuse world
Next by date:
Re: newbie help with emerge --update --deep --newuse world


Updated Jun 17, 2009

Summary: Archive of the gentoo-ppc-user mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.