Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-ppc-user
Navigation:
Lists: gentoo-ppc-user: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: <gentoo-ppc-user@g.o>
From: <nova@...>
Subject: Re: mounting USB flash disk
Date: Sun, 11 Dec 2005 13:48:14 -0800 (PST)
here is the dmesg output I finally got from booting.
Thanks so much,
nick
> Hello Nick,
> please start syslog-ng -d on a command line, so that you see debug
> messages. Best reagrds Joerg
>
> Am Sonntag 11 Dezember 2005 20:52 schrieb nova@...:
>> Sorry, links ate the rest of my message.
>> syslog-ng dies with "bad config file"
>> hotplug usb:
>> Bad USB agent invocation, no action
>> and dmesg still only shows the keypresses (I got rid of Kernel
>> hacking-> debugging). I also added SCSI multi-LUN support, HD support,
>> and general device support. USB mass storage became module (to test in
>> MOL). and I also tried to fix my windowing problems with GNOME, KDE,
>> and XFCE (all installed, all failing) by making radeonfb a module.
>> sorry,
>> nick
>>
>> > and the root hubs (ID 0000:0000)
>> > Thanks
>> > nick
>> >
>> >> Am Sonntag 11 Dezember 2005 17:07 schrieb nova@...:
>> >>> > I am on a powerbook G4 800mhz and it is
>> >>> >> plugged into the back of the computer (port 2). Does anyone
>> know
>> >>> how to solve this problem?
>> >>> >> thanks
>> >>> >> nick
>> >>> >
>> >>> > First, next time, please start a new thread instead of replying
>> to
>> >>> an existing one.
>> >>> >
>> >>> > That said, you'll have to provide more information.  Can you
>> give
>> >>> us
>> >>> the
>> >>> >  kernel messages from dmesg related to the USB stick?  Are you
>> sure
>> >>> you
>> >>> > have USB disk support and generic scsi disk support in your
>> kernel?
>> >>> >
>> >>> > -Joe
>> >>> > --
>> >>> > gentoo-ppc-user@g.o mailing list
>> >>> Sorry about replying instead of starting again.
>> >>> Are there any just-X11 browsers besides links -g that I can use?
>> Whenever I press the back arrow it goes back and deletes the email
>> I was writing.
>> >>>
>> >>> Anyway, the only messages in dmesg (I do not know why) are
>> keypress
>> >> events!?!
>> >>> I used to be informative, but now all it has are keypresses...
>> >>>
>> >>> I have SCSI support, and USB mass storage (with all sub-options)
>> >> compiled-in.
>> >>> Do I need to add support for SCSI disks, CDROMS, generic devices,
>> etc in order for USB versions of those to work?
>> >>> Thanks,
>> >>> nick
>> >>>
>> >>>
>> >>> --
>> >>> gentoo-ppc-user@g.o mailing list
>> >>>
>> >>>
>> >> Hello Nick,
>> >> You need modules for SCSI device support, SCSI disk support and
>> please enable  'Probe all LUNs on each SCSI device' as it helps
>> with Multi Card Readers. As long as the USB is hotpluggable, you
>> should install hotplug and udev  packages.
>> >> A good idea is to put the USB Disk in and to have look in dmesg
>> and/or /var/log/messages.
>> >> Normally I the disk should recognized by the kernel and produce at
>> least some  messages. (May be a lsusb show if there is something
>> recognized.) Best regards Joerg
>> >> --
>> >> gentoo-ppc-user@g.o mailing list
>>
>>
>>
>> --
>> gentoo-ppc-user@g.o mailing list
>>
>>
> --
> gentoo-ppc-user@g.o mailing list


egistered as minor 2
i2c_adapter i2c-2: registered as adapter #2
Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits
tas driver [TAS3004 driver V 0.3])
using i2c address: 0x35 from device-tree
i2c-core: driver tas registered.
i2c_adapter i2c-2: client [tas Digital Equalizer] registered to adapter
registering 2-0035
ohci1394: fw-host0: IntEvent: 00030010
ohci1394: fw-host0: irq_handler: Bus reset requested
ohci1394: fw-host0: Cancel request received
ohci1394: fw-host0: Got RQPkt interrupt status=0x00008409
ohci1394: fw-host0: SelfID interrupt received (phyid 0, root)
ohci1394: fw-host0: SelfID packet 0x807f8842 received
ieee1394: Including SelfID 0x807f8842
ohci1394: fw-host0: SelfID for this node is 0x807f8842
ohci1394: fw-host0: SelfID complete
ohci1394: fw-host0: PhyReqFilter=ffffffffffffffff
ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0
ieee1394: NodeMgr: Processing host reset for knodemgrd_0
ohci1394: fw-host0: Single packet rcv'd
ohci1394: fw-host0: Got phy packet ctx=0 ... discarded
Audio jack unplugged, enabling speakers.
chan: 0, addr: 0x35, transfer len: 1, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 1, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 6, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 1, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 1, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 6, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 9, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 9, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 9, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 9, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 9, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 9, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 1, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 1, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 1, read: 0
using interrupt mode...
evbug.c: Connected device: "dmasound beeper", macio/input0
AE-Init snapper mixer
PowerMac Snapper  DMA sound driver rev 016 installed
Core driver edition 01.06 : PowerMac Built-in Sound driver edition 00.07
Write will use    4 fragments of   32768 bytes as default
Read  will use    4 fragments of   32768 bytes as default
Advanced Linux Sound Architecture Driver Version 1.0.9rc2  (Thu Mar 24 10:33:39 2005 UTC).
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 6, read: 0
using interrupt mode...
pmac: can't request resource 0!
ALSA device list:
  No soundcards found.
NET: Registered protocol family 2
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 1, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
IPv4 over IPv4 tunneling driver
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
ieee1394: send packet local: ffc00140 ffc0ffff f0000400
ieee1394: received packet: ffc00140 ffc0ffff f0000400
ieee1394: send packet local: ffc00160 ffc00000 00000000 04041ee6
ieee1394: received packet: ffc00160 ffc00000 00000000 04041ee6
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
ieee1394: send packet local: ffc00540 ffc0ffff f0000404
ieee1394: received packet: ffc00540 ffc0ffff f0000404
ieee1394: send packet local: ffc00560 ffc00000 00000000 31333934
ieee1394: received packet: ffc00560 ffc00000 00000000 31333934
ieee1394: send packet local: ffc00940 ffc0ffff f0000408
ieee1394: received packet: ffc00940 ffc0ffff f0000408
ieee1394: send packet local: ffc00960 ffc00000 00000000 e064a232
ieee1394: received packet: ffc00960 ffc00000 00000000 e064a232
ieee1394: send packet local: ffc00d40 ffc0ffff f000040c
ieee1394: received packet: ffc00d40 ffc0ffff f000040c
ieee1394: send packet local: ffc00d60 ffc00000 00000000 000393ff
ieee1394: received packet: ffc00d60 ffc00000 00000000 000393ff
ieee1394: send packet local: ffc01140 ffc0ffff f0000410
ieee1394: received packet: ffc01140 ffc0ffff f0000410
ieee1394: send packet local: ffc01160 ffc00000 00000000 fe8024f2
ieee1394: received packet: ffc01160 ffc00000 00000000 fe8024f2
ieee1394: send packet local: ffc01550 ffc0ffff f0000400 04000000
ieee1394: received packet: ffc01550 ffc0ffff f0000400 04000000
ieee1394: send packet local: ffc01570 ffc00000 00000000 04000000
ieee1394: received packet: ffc01570 ffc00000 00000000 04000000
ieee1394: NodeMgr: raw=0xe064a232 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=100 max_rec=2048 max_rom=1024 gen=3 lspd=2
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000393fffe8024f2]
ieee1394: send packet 100: ffff0100 ffc0ffff f0000234 c000001f
ohci1394: fw-host0: Inserting packet for node 0-63:1023, tlabel=0, tcode=0x0, speed=0
ohci1394: fw-host0: Starting transmit DMA ctx=0
ohci1394: fw-host0: IntEvent: 00000001
ohci1394: fw-host0: Got reqTxComplete interrupt status=0x00008011
ohci1394: fw-host0: Packet sent to node 63 tcode=0x0 tLabel=0 ack=0x11 spd=0 data=0x1F0000C0 ctx=0
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
IPVS: ipvs loaded.
NET: Registered protocol family 17
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 15, read: 0
using interrupt mode...
transfer done, result: 0
chan: 0, addr: 0x35, transfer len: 1, read: 0
using interrupt mode...
transfer done, result: 0
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@...>
All bugs added by David S. Miller <davem@...>
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: hda11: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 18354
EXT3-fs: hda11: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 324k init 4k chrp 8k prep
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 8
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 15
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 17
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 1
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 17
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 22
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -2
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 25
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -6
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 28
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -11
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 31
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -15
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 28
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -20
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 4
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -4
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -13
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -5
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -19
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -8
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -30
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -7
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -38
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -7
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -48
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -4
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -56
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: -3
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -61
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 61
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 2
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 58
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 4
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 59
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 9
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 63
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 12
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -60
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 14
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -56
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 18
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -52
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 19
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -36
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 23
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: -3
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 4
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 17
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 6
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 26
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 7
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 33
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 10
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 36
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 12
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 37
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 14
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 0, Value: 8
evbug.c: Event. Dev: adb3:3.01/input, Type: 2, Code: 1, Value: 2
evbug.c: Event. Dev: adb3:3.01/input, Type: 0, Code: 0, Value: 0
Adding 524280k swap on /dev/hda10.  Priority:-1 extents:1
EXT3 FS on hda11, internal journal
HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.

References:
Glibc pooched. Borked system.
-- darren kirby
Re: mounting USB flash disk
-- nova
Re: mounting USB flash disk
-- nova
Re: mounting USB flash disk
-- Joerg Gollnick
Navigation:
Lists: gentoo-ppc-user: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
Re: mounting USB flash disk
Next by thread:
Re: mounting USB flash disk
Previous by date:
Re: mounting USB flash disk
Next by date:
Re: mounting USB flash disk


Updated Jun 17, 2009

Summary: Archive of the gentoo-ppc-user mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.