| 1 |
Hi, |
| 2 |
I've tested live cd 2005.0-r4 and after a few lines of kernel |
| 3 |
messages the display became black. The last line I saw was something |
| 4 |
with "smp_cXX". But the system was still alive because I was able to |
| 5 |
bring up ethernet and sshd by typing sightlessly. It's an iMac G5 1.8 |
| 6 |
GHz from october 2004 |
| 7 |
|
| 8 |
Found initrd at 0xc000000001d00000:0xc000000001de8c0a |
| 9 |
trying to initialize btext ... |
| 10 |
U3-DART: table not allocated, using direct DMA |
| 11 |
Starting Linux PPC64 2.6.12-gentoo-livecd |
| 12 |
----------------------------------------------------- |
| 13 |
ppc64_pft_size = 0x18 |
| 14 |
ppc64_debug_switch = 0x0 |
| 15 |
ppc64_interrupt_controller = 0x1 |
| 16 |
systemcfg = 0xc000000000554000 |
| 17 |
systemcfg->platform = 0x400 |
| 18 |
systemcfg->processorCount = 0x1 |
| 19 |
systemcfg->physicalMemorySize = 0x30000000 |
| 20 |
ppc64_caches.dcache_line_size = 0x80 |
| 21 |
ppc64_caches.icache_line_size = 0x80 |
| 22 |
htab_address = 0xc00000002e000000 |
| 23 |
htab_hash_mask = 0x1ffff |
| 24 |
----------------------------------------------------- |
| 25 |
[boot]0100 MM Init |
| 26 |
[boot]0100 MM Init Done |
| 27 |
Linux version 2.6.12-gentoo-livecd (root@G5) (gcc version 3.4.3 |
| 28 |
20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #1 SMP Thu |
| 29 |
Jun 23 11:23:27 UTC 2005 |
| 30 |
[boot]0012 Setup Arch |
| 31 |
Syscall map setup, 229 32 bits and 205 64 bits syscalls |
| 32 |
Found U3 memory controller & host bridge, revision: 57 |
| 33 |
Mapped at 0xe000000080152000 |
| 34 |
Found a K2 mac-io controller, rev: 0, mapped at 0xe000000080193000 |
| 35 |
PowerMac motherboard: iMac G5 |
| 36 |
nvram: Checking bank 0... |
| 37 |
nvram: gen0=52, gen1=51 |
| 38 |
nvram: Active bank is: 0 |
| 39 |
Adding PCI host bridge /pci@0,f0000000 |
| 40 |
Found U3-AGP PCI host bridge. Firmware bus number: 240->255 |
| 41 |
Adding PCI host bridge /ht@0,f2000000 |
| 42 |
Can't get bus-range for /ht@0,f2000000, assume bus 0 |
| 43 |
U3/HT: hole, 0 end at 8fffffff, 1 start at b0000000 |
| 44 |
Found U3-HT PCI host bridge. Firmware bus number: 0->239 |
| 45 |
Can't get bus-range for /ht@0,f2000000 |
| 46 |
PCI Host 0, io start: fffffffffd800000; io end: fffffffffdffffff |
| 47 |
PCI Host 1, io start: 0; io end: 3fffff |
| 48 |
Using native/NAP idle loop |
| 49 |
Top of RAM: 0x30000000, Total RAM: 0x30000000 |
| 50 |
Memory hole size: 0MB |
| 51 |
On node 0 totalpages: 196608 |
| 52 |
DMA zone: 196608 pages, LIFO batch:31 |
| 53 |
Normal zone: 0 pages, LIFO batch:1 |
| 54 |
HighMem zone: 0 pages, LIFO batch:1 |
| 55 |
[boot]0015 Setup Done |
| 56 |
Built 1 zonelists |
| 57 |
Kernel command line: root=/dev/ram rw ramdisk_size=11000 cdroot devfs |
| 58 |
init=/linuxrc |
| 59 |
PowerMac using OpenPIC irq controller at 0x80040000 |
| 60 |
mpic: Setting up MPIC " K2-MPIC " version 1.2 at 80040000, max 4 CPUs |
| 61 |
mpic: ISU size: 124, shift: 7, mask: 7f |
| 62 |
mpic: Initializing for 124 sources |
| 63 |
Slave OpenPIC at 0xf8040000 hooked on IRQ 96 |
| 64 |
mpic: Setting up MPIC " U3-MPIC " version 1.2 at f8040000, max 4 CPUs |
| 65 |
mpic: ISU size: 124, shift: 7, mask: 7f |
| 66 |
mpic: Initializing for 124 sources |
| 67 |
PID hash table entries: 4096 (order: 12, 131072 bytes) |
| 68 |
time_init: decrementer frequency = 33.333333 MHz |
| 69 |
SMU do_cmd 8e len=1 81 |
| 70 |
SMU do_cmd 71 len=7 46 => 0 (71) |
| 71 |
Console: colour dummy device 80x25 |
| 72 |
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| 73 |
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) |
| 74 |
Memory: 748156k/786432k available (4388k kernel code, 37552k |
| 75 |
reserved, 1664k data, 442k bss, 340k init) |
| 76 |
Calibrating delay loop... 66.30 BogoMIPS (lpj=33152) |
| 77 |
Mount-cache hash table entries: 256 |
| 78 |
PowerMac SMP probe found 1 cpus |
| 79 |
Brought up 1 CPUs |
| 80 |
CPU0 attaching sched-domain: |
| 81 |
domain 0: span 1 |
| 82 |
groups: 1 |
| 83 |
checking if image is initramfs...it isn't (no cpio magic); looks like |
| 84 |
an initrd |
| 85 |
Freeing initrd memory: 931k freed |
| 86 |
NET: Registered protocol family 16 |
| 87 |
PCI: Probing PCI hardware |
| 88 |
PCI: Probing PCI hardware done |
| 89 |
SCSI subsystem initialized |
| 90 |
usbcore: registered new driver usbfs |
| 91 |
usbcore: registered new driver hub |
| 92 |
i/pSeries Real Time Clock Driver v1.1 |
| 93 |
nvram_init: Could not find nvram partition for nvram buffered error |
| 94 |
logging. |
| 95 |
Total HugeTLB memory allocated, 0 |
| 96 |
inotify device minor=63 |
| 97 |
devfs: 2004-01-31 Richard Gooch (rgooch@××××××××××.au) |
| 98 |
devfs: boot_options: 0x1 |
| 99 |
Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
| 100 |
JFS: nTxBlock = 5857, nTxLock = 46863 |
| 101 |
Initializing Cryptographic API |
| 102 |
rivafb: nVidia device/chipset 10DE0329 |
| 103 |
rivafb: nVidia Corporation NV34M [GeForce FX Go5200] |
| 104 |
rivafb: On a laptop. Assuming Digital Flat Panel |
| 105 |
rivafb: Detected CRTC controller 1 being used |
| 106 |
rivafb: disabling acceleration |
| 107 |
rivafb: setting virtual Y resolution to 46603 |
| 108 |
Console: switching to colour frame buffer device 180x56 |
| 109 |
rivafb: PCI nVidia NV32 framebuffer ver 0.9.5b (64MB @ 0xA0000000) |
| 110 |
io scheduler noop registered |
| 111 |
io scheduler anticipatory registered |
| 112 |
io scheduler deadline registered |
| 113 |
io scheduler cfq registered |
| 114 |
RAMDISK driver initialized: 16 RAM disks of 11000K size 1024 blocksize |
| 115 |
loop: loaded (max 8 devices) |
| 116 |
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2 |
| 117 |
Copyright (c) 1999-2004 Intel Corporation. |
| 118 |
sungem.c:v0.98 8/24/03 David S. Miller (davem@××××××.com) |
| 119 |
PHY ID: 4061e4, addr: 0 |
| 120 |
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:59:84:b4 |
| 121 |
eth0: Found BCM5221 PHY |
| 122 |
MacIO PCI driver attached to K2 chipset |
| 123 |
Warning: no ADB interface detected |
| 124 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
| 125 |
ide: Assuming 33MHz system bus speed for PIO modes; override with |
| 126 |
idebus=xx |
| 127 |
PCI: Enabling device: (0001:02:0d.0), cmd 2 |
| 128 |
ide0: Found Apple Shasta ATA-6 controller, bus ID 3, irq 38 |
| 129 |
Probing IDE interface ide0... |
| 130 |
hda: MATSHITADVD-R UJ-825, ATAPI CD/DVD-ROM drive |
| 131 |
hda: Enabling Ultra DMA 4 |
| 132 |
ide0 at 0xe00000008802c000-0xe00000008802c007,0xe00000008802c160 on |
| 133 |
irq 38 |
| 134 |
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) |
| 135 |
Uniform CD-ROM driver Revision: 3.20 |
| 136 |
ide-floppy driver 0.99.newide |
| 137 |
libata version 1.11 loaded. |
| 138 |
sata_svw version 1.05 |
| 139 |
ata1: SATA max UDMA/133 cmd 0xE00000008802E000 ctl 0xE00000008802E020 |
| 140 |
bmdma 0xE00000008802E030 irq 10 |
| 141 |
ata2: SATA max UDMA/133 cmd 0xE00000008802E100 ctl 0xE00000008802E120 |
| 142 |
bmdma 0xE00000008802E130 irq 10 |
| 143 |
ata3: SATA max UDMA/133 cmd 0xE00000008802E200 ctl 0xE00000008802E220 |
| 144 |
bmdma 0xE00000008802E230 irq 10 |
| 145 |
ata4: SATA max UDMA/133 cmd 0xE00000008802E300 ctl 0xE00000008802E320 |
| 146 |
bmdma 0xE00000008802E330 irq 10 |
| 147 |
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 |
| 148 |
87:4003 88:007f |
| 149 |
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48 |
| 150 |
ata1: dev 0 configured for UDMA/133 |
| 151 |
scsi0 : sata_svw |
| 152 |
ata2: no device found (phy stat 00000004) |
| 153 |
scsi1 : sata_svw |
| 154 |
ata3: no device found (phy stat 00000000) |
| 155 |
scsi2 : sata_svw |
| 156 |
ata4: no device found (phy stat 00000000) |
| 157 |
scsi3 : sata_svw |
| 158 |
Vendor: ATA Model: ST380013AS Rev: 5.06 |
| 159 |
Type: Direct-Access ANSI SCSI revision: 05 |
| 160 |
st: Version 20050312, fixed bufsize 32768, s/g segs 256 |
| 161 |
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) |
| 162 |
SCSI device sda: drive cache: write back |
| 163 |
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) |
| 164 |
SCSI device sda: drive cache: write back |
| 165 |
/dev/scsi/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 p7 p8 p9 |
| 166 |
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 |
| 167 |
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 |
| 168 |
ieee1394: Initialized config rom entry `ip1394' |
| 169 |
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@××××××.org> |
| 170 |
PCI: Enabling device: (0001:02:0e.0), cmd 2 |
| 171 |
ohci1394: fw-host0: Unexpected PCI resource length of 1000! |
| 172 |
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[39] MMIO= |
| 173 |
[80100000-801007ff] Max Packet=[2048] |
| 174 |
ieee1394: raw1394: /dev/raw1394 device initialized |
| 175 |
usbmon: debugs is not available |
| 176 |
PCI: Enabling device: (0001:01:0b.2), cmd 6 |
| 177 |
ehci_hcd 0001:01:0b.2: NEC Corporation USB 2.0 |
| 178 |
ehci_hcd 0001:01:0b.2: new USB bus registered, assigned bus number 1 |
| 179 |
ehci_hcd 0001:01:0b.2: irq 70, io mem 0x80080000 |
| 180 |
ehci_hcd 0001:01:0b.2: park 0 |
| 181 |
ehci_hcd 0001:01:0b.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec |
| 182 |
2004 |
| 183 |
hub 1-0:1.0: USB hub found |
| 184 |
hub 1-0:1.0: 5 ports detected |
| 185 |
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
| 186 |
PCI: Enabling device: (0001:01:0b.0), cmd 2 |
| 187 |
ohci_hcd 0001:01:0b.0: NEC Corporation USB |
| 188 |
ohci_hcd 0001:01:0b.0: new USB bus registered, assigned bus number 2 |
| 189 |
ohci_hcd 0001:01:0b.0: irq 70, io mem 0x80082000 |
| 190 |
hub 2-0:1.0: USB hub found |
| 191 |
hub 2-0:1.0: 3 ports detected |
| 192 |
PCI: Enabling device: (0001:01:0b.1), cmd 2 |
| 193 |
ohci_hcd 0001:01:0b.1: NEC Corporation USB (#2) |
| 194 |
ohci_hcd 0001:01:0b.1: new USB bus registered, assigned bus number 3 |
| 195 |
ohci_hcd 0001:01:0b.1: irq 70, io mem 0x80081000 |
| 196 |
hub 3-0:1.0: USB hub found |
| 197 |
hub 3-0:1.0: 2 ports detected |
| 198 |
usbcore: registered new driver usblp |
| 199 |
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver |
| 200 |
Initializing USB Mass Storage driver... |
| 201 |
usb 2-1: new full speed USB device using ohci_hcd and address 2 |
| 202 |
hub 2-1:1.0: USB hub found |
| 203 |
hub 2-1:1.0: 3 ports detected |
| 204 |
usbcore: registered new driver usb-storage |
| 205 |
USB Mass Storage support registered. |
| 206 |
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe5984b4] |
| 207 |
usb 3-1: new low speed USB device using ohci_hcd and address 2 |
| 208 |
usbcore: registered new driver hiddev |
| 209 |
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with |
| 210 |
IntelliEye(TM)] on usb-0001:01:0b.1-1 |
| 211 |
usbcore: registered new driver usbhid |
| 212 |
drivers/usb/input/hid-core.c: v2.01:USB HID core driver |
| 213 |
mice: PS/2 mouse device common for all mice |
| 214 |
i2c /dev entries driver |
| 215 |
Found KeyWest i2c on "u3", 2 channels, stepping: 4 bits |
| 216 |
Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits |
| 217 |
md: linear personality registered as nr 1 |
| 218 |
md: raid0 personality registered as nr 2 |
| 219 |
md: raid1 personality registered as nr 3 |
| 220 |
md: raid5 personality registered as nr 4 |
| 221 |
raid5: measuring checksumming speed |
| 222 |
8regs : 2032.000 MB/sec |
| 223 |
8regs_prefetch: 1644.000 MB/sec |
| 224 |
32regs : 2372.000 MB/sec |
| 225 |
32regs_prefetch: 1984.000 MB/sec |
| 226 |
raid5: using function: 32regs (2372.000 MB/sec) |
| 227 |
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 |
| 228 |
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@××××××.com |
| 229 |
oprofile: using ppc64/970 performance monitoring. |
| 230 |
NET: Registered protocol family 2 |
| 231 |
IP: routing cache hash table of 4096 buckets, 64Kbytes |
| 232 |
TCP established hash table entries: 131072 (order: 9, 2097152 bytes) |
| 233 |
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 234 |
TCP: Hash tables configured (established 131072 bind 65536) |
| 235 |
IPv4 over IPv4 tunneling driver |
| 236 |
ip_conntrack version 2.1 (3072 buckets, 24576 max) - 304 bytes per |
| 237 |
conntrack |
| 238 |
ip_tables: (C) 2000-2002 Netfilter core team |
| 239 |
ipt_recent v0.3.1: Stephen Frost <sfrost@×××××××.net>. http:// |
| 240 |
snowman.net/projects/ipt_recent/ |
| 241 |
arp_tables: (C) 2002 David S. Miller |
| 242 |
NET: Registered protocol family 1 |
| 243 |
NET: Registered protocol family 17 |
| 244 |
devfs_mk_dev: could not append to parent for md/0 |
| 245 |
md: Autodetecting RAID arrays. |
| 246 |
md: autorun ... |
| 247 |
md: ... autorun DONE. |
| 248 |
RAMDISK: Compressed image found at block 0 |
| 249 |
usb 2-1.2: new full speed USB device using ohci_hcd and address 3 |
| 250 |
VFS: Mounted root (ext2 filesystem). |
| 251 |
Mounted devfs on /dev |
| 252 |
Freeing unused kernel memory: 340k freed |
| 253 |
usb 2-1.3: new full speed USB device using ohci_hcd and address 4 |
| 254 |
input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB |
| 255 |
Keyboard] on usb-0001:01:0b.0-1.3 |
| 256 |
input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB |
| 257 |
Keyboard] on usb-0001:01:0b.0-1.3 |
| 258 |
VFS: Can't find ext3 filesystem on dev hda. |
| 259 |
VFS: Can't find an ext2 filesystem on dev hda. |
| 260 |
cramfs: wrong magic |
| 261 |
FAT: bogus number of reserved sectors |
| 262 |
VFS: Can't find a valid FAT filesystem on dev hda. |
| 263 |
FAT: bogus number of reserved sectors |
| 264 |
VFS: Can't find a valid FAT filesystem on dev hda. |
| 265 |
ISO 9660 Extensions: Microsoft Joliet Level 3 |
| 266 |
ISO 9660 Extensions: RRIP_1991A |
| 267 |
SMU do_cmd 8e len=1 81 |
| 268 |
SMU do_cmd 71 len=7 18 => 0 (71) |
| 269 |
SMU do_cmd 8e len=1 81 |
| 270 |
SMU do_cmd 71 len=7 18 => 0 (71) |
| 271 |
SMU do_cmd 8e len=1 81 |
| 272 |
SMU do_cmd 71 len=7 19 => 0 (71) |
| 273 |
SMU do_cmd 8e len=1 81 |
| 274 |
SMU do_cmd 71 len=7 19 => 0 (71) |
| 275 |
SMU do_cmd 8e len=1 81 |
| 276 |
SMU do_cmd 71 len=7 19 => 0 (71) |
| 277 |
SMU do_cmd 8e len=1 81 |
| 278 |
SMU do_cmd 71 len=7 19 => 0 (71) |
| 279 |
SMU do_cmd 8e len=1 81 |
| 280 |
SMU do_cmd 71 len=7 19 => 0 (71) |
| 281 |
SMU do_cmd 8e len=1 81 |
| 282 |
SMU do_cmd 8e len=1 81 => -1 (71) |
| 283 |
SMU do_cmd 8e len=1 81 |
| 284 |
SMU do_cmd 71 len=7 19 => 0 (71) |
| 285 |
usb 1-3: new high speed USB device using ehci_hcd and address 4 |
| 286 |
scsi4 : SCSI emulation for USB Mass Storage devices |
| 287 |
usb-storage: device found at 4 |
| 288 |
usb-storage: waiting for device to settle before scanning |
| 289 |
Vendor: USB 2.0 Model: Mobile Disk Rev: 2.00 |
| 290 |
Type: Direct-Access ANSI SCSI revision: 02 |
| 291 |
sdb: Unit Not Ready, sense: |
| 292 |
: Current: sense key: Unit Attention |
| 293 |
Additional sense: Not ready to ready change, medium may have |
| 294 |
changed |
| 295 |
SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) |
| 296 |
sdb: Write Protect is off |
| 297 |
sdb: Mode Sense: 03 00 00 00 |
| 298 |
sdb: assuming drive cache: write through |
| 299 |
SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) |
| 300 |
sdb: Write Protect is off |
| 301 |
sdb: Mode Sense: 03 00 00 00 |
| 302 |
sdb: assuming drive cache: write through |
| 303 |
/dev/scsi/host4/bus0/target0/lun0: p1 |
| 304 |
Attached scsi removable disk sdb at scsi4, channel 0, id 0, lun 0 |
| 305 |
Attached scsi generic sg1 at scsi4, channel 0, id 0, lun 0, type 0 |
| 306 |
usb-storage: device scan complete |
| 307 |
VFS: Can't find ext3 filesystem on dev sda1. |
| 308 |
usb 1-3: USB disconnect, address 4 |
| 309 |
usb 1-3: new high speed USB device using ehci_hcd and address 5 |
| 310 |
scsi5 : SCSI emulation for USB Mass Storage devices |
| 311 |
usb-storage: device found at 5 |
| 312 |
usb-storage: waiting for device to settle before scanning |
| 313 |
Vendor: USB 2.0 Model: Mobile Disk Rev: 2.00 |
| 314 |
Type: Direct-Access ANSI SCSI revision: 02 |
| 315 |
sdb: Unit Not Ready, sense: |
| 316 |
: Current: sense key: Unit Attention |
| 317 |
Additional sense: Not ready to ready change, medium may have |
| 318 |
changed |
| 319 |
SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) |
| 320 |
sdb: Write Protect is off |
| 321 |
sdb: Mode Sense: 03 00 00 00 |
| 322 |
sdb: assuming drive cache: write through |
| 323 |
SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) |
| 324 |
sdb: Write Protect is off |
| 325 |
sdb: Mode Sense: 03 00 00 00 |
| 326 |
sdb: assuming drive cache: write through |
| 327 |
/dev/scsi/host5/bus0/target0/lun0: p1 |
| 328 |
Attached scsi removable disk sdb at scsi5, channel 0, id 0, lun 0 |
| 329 |
Attached scsi generic sg1 at scsi5, channel 0, id 0, lun 0, type 0 |
| 330 |
usb-storage: device scan complete |
| 331 |
VFS: Can't find ext3 filesystem on dev sda1. |
| 332 |
|
| 333 |
|
| 334 |
0000:f0:0b.0 Host bridge: Apple Computer Inc. U3L AGP Bridge |
| 335 |
Flags: bus master, 66Mhz, medium devsel, latency 16 |
| 336 |
Capabilities: [80] AGP version 3.0 |
| 337 |
|
| 338 |
0000:f0:10.0 VGA compatible controller: nVidia Corporation NV34M |
| 339 |
[GeForce FX Go5200] (rev a1) (prog-if 00 [VGA]) |
| 340 |
Subsystem: nVidia Corporation: Unknown device 0010 |
| 341 |
Flags: bus master, 66Mhz, medium devsel, latency 16, IRQ 59 |
| 342 |
Memory at 91000000 (32-bit, non-prefetchable) [size=90000000] |
| 343 |
Memory at a0000000 (32-bit, prefetchable) [size=128M] |
| 344 |
Expansion ROM at 00020000 [disabled] |
| 345 |
Capabilities: [60] Power Management version 2 |
| 346 |
Capabilities: [44] AGP version 3.0 |
| 347 |
|
| 348 |
0001:00:01.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge (prog- |
| 349 |
if 00 [Normal decode]) |
| 350 |
Flags: bus master, fast devsel, latency 0 |
| 351 |
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 |
| 352 |
Memory behind bridge: 80200000-805fffff |
| 353 |
Prefetchable memory behind bridge: 00000000-000fffff |
| 354 |
Capabilities: [70] #08 [0061] |
| 355 |
Capabilities: [90] #08 [8000] |
| 356 |
|
| 357 |
0001:00:02.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge (prog- |
| 358 |
if 00 [Normal decode]) |
| 359 |
Flags: bus master, fast devsel, latency 0 |
| 360 |
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 |
| 361 |
Memory behind bridge: 80000000-800fffff |
| 362 |
Prefetchable memory behind bridge: 00000000-000fffff |
| 363 |
Capabilities: [70] #08 [8824] |
| 364 |
|
| 365 |
0001:00:03.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge (prog- |
| 366 |
if 00 [Normal decode]) |
| 367 |
Flags: bus master, fast devsel, latency 0 |
| 368 |
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 |
| 369 |
Memory behind bridge: 80100000-801fffff |
| 370 |
Prefetchable memory behind bridge: 00000000-000fffff |
| 371 |
Capabilities: [70] #08 [8824] |
| 372 |
|
| 373 |
0001:01:01.0 Network controller: Broadcom Corporation BCM4306 802.11b/ |
| 374 |
g Wireless LAN Controller (rev 03) |
| 375 |
Subsystem: Apple Computer Inc.: Unknown device 004e |
| 376 |
Flags: bus master, fast devsel, latency 16, IRQ 60 |
| 377 |
Memory at 80084000 (32-bit, non-prefetchable) [disabled] |
| 378 |
Capabilities: [40] Power Management version 2 |
| 379 |
|
| 380 |
0001:01:07.0 Class ff00: Apple Computer Inc. Shasta Mac I/O |
| 381 |
Flags: bus master, medium devsel, latency 16 |
| 382 |
Memory at 80000000 (32-bit, non-prefetchable) |
| 383 |
|
| 384 |
0001:01:0b.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 |
| 385 |
[OHCI]) |
| 386 |
Subsystem: NEC Corporation USB |
| 387 |
Flags: bus master, medium devsel, latency 16, IRQ 70 |
| 388 |
Memory at 80082000 (32-bit, non-prefetchable) |
| 389 |
Capabilities: [40] Power Management version 2 |
| 390 |
|
| 391 |
0001:01:0b.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 |
| 392 |
[OHCI]) |
| 393 |
Subsystem: NEC Corporation USB |
| 394 |
Flags: bus master, medium devsel, latency 16, IRQ 70 |
| 395 |
Memory at 80081000 (32-bit, non-prefetchable) |
| 396 |
Capabilities: [40] Power Management version 2 |
| 397 |
|
| 398 |
0001:01:0b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog- |
| 399 |
if 20 [EHCI]) |
| 400 |
Subsystem: NEC Corporation USB 2.0 |
| 401 |
Flags: bus master, medium devsel, latency 16, IRQ 70 |
| 402 |
Memory at 80080000 (32-bit, non-prefetchable) |
| 403 |
Capabilities: [40] Power Management version 2 |
| 404 |
|
| 405 |
0001:02:0c.0 IDE interface: Broadcom (formerly ServerWorks) K2 SATA |
| 406 |
(prog-if 8f [Master SecP SecO PriP PriO]) |
| 407 |
Subsystem: Broadcom (formerly ServerWorks) K2 SATA |
| 408 |
Flags: bus master, 66Mhz, medium devsel, latency 16, IRQ 10 |
| 409 |
I/O ports at <unassigned> [disabled] |
| 410 |
I/O ports at <unassigned> [disabled] |
| 411 |
I/O ports at <unassigned> [disabled] |
| 412 |
I/O ports at <unassigned> [disabled] |
| 413 |
I/O ports at <unassigned> [disabled] |
| 414 |
Memory at 80102000 (32-bit, non-prefetchable) [size=8K] |
| 415 |
|
| 416 |
0001:02:0d.0 Class ff00: Apple Computer Inc. Shasta IDE |
| 417 |
Flags: bus master, medium devsel, latency 32, IRQ 38 |
| 418 |
Memory at 80104000 (32-bit, non-prefetchable) |
| 419 |
|
| 420 |
0001:02:0e.0 FireWire (IEEE 1394): Apple Computer Inc. Shasta |
| 421 |
Firewire (prog-if 10 [OHCI]) |
| 422 |
Subsystem: Apple Computer Inc.: Unknown device 5811 |
| 423 |
Flags: bus master, medium devsel, latency 248, IRQ 39 |
| 424 |
Memory at 80100000 (32-bit, non-prefetchable) |
| 425 |
Capabilities: [44] Power Management version 2 |
| 426 |
|
| 427 |
0001:03:0f.0 Ethernet controller: Apple Computer Inc. Shasta (Sun GEM) |
| 428 |
Flags: bus master, 66Mhz, slow devsel, latency 16, IRQ 40 |
| 429 |
Memory at 80400000 (32-bit, non-prefetchable) [size=80200000] |
| 430 |
Expansion ROM at 00100000 [disabled] |
Archives