1 |
Catalyst, version 2.0.18 |
2 |
Copyright 2003-2008 Gentoo Foundation |
3 |
Copyright 2008-2012 various authors |
4 |
Distributed under the GNU General Public License version 2.1 |
5 |
|
6 |
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf |
7 |
Setting sharedir to config file value "/usr/lib/catalyst" |
8 |
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache" |
9 |
Setting hash_function to config file value "crc32" |
10 |
Setting storedir to config file value "/usr/local/catalyst" |
11 |
Setting portdir to config file value "/usr/portage" |
12 |
Setting distdir to config file value "/usr/portage/distfiles" |
13 |
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache" |
14 |
Autoresuming support enabled. |
15 |
Binary redistribution enabled |
16 |
Package cache support enabled. |
17 |
Seed cache support enabled. |
18 |
Snapshot cache support enabled. |
19 |
Envscript support enabled. |
20 |
Using target: stage1 |
21 |
Building natively for hppa |
22 |
stage1 root path is /tmp/stage1root |
23 |
Source path set to /usr/local/catalyst/builds/default/stage3-hppa2.0-latest.tar.bz2 |
24 |
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150605/ |
25 |
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-stage1-hppa2.0-20150605/ |
26 |
stage1 stage path is /usr/local/catalyst/tmp/default/stage1-hppa2.0-20150605/tmp/stage1root |
27 |
Location of the package cache is /usr/local/catalyst/packages/default/stage1-hppa2.0-20150605/ |
28 |
Checking for processes running in chroot and killing them. |
29 |
Removing AutoResume Points: ... |
30 |
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-stage1-hppa2.0-20150605/ |
31 |
>>> Waiting 10 seconds before starting... |
32 |
>>> (Control-C to abort)... |
33 |
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1 |
34 |
clearing autoresume ... |
35 |
Removing AutoResume Points: ... |
36 |
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-stage1-hppa2.0-20150605/ |
37 |
clearing chroot ... |
38 |
Emptying directory /usr/local/catalyst/tmp/default/stage1-hppa2.0-20150605/ |
39 |
clearing package cache ... |
40 |
purging the pkgcache ... |
41 |
clearing kerncache ... |
42 |
--- Running action sequence: unpack |
43 |
Referenced SEEDCACHE does not appear to be a directory, trying to untar... |
44 |
No Valid Resume point detected, cleaning up... |
45 |
Removing AutoResume Points: ... |
46 |
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-stage1-hppa2.0-20150605/ |
47 |
Emptying directory /usr/local/catalyst/tmp/default/stage1-hppa2.0-20150605/ |
48 |
|
49 |
Starting tar extract from /usr/local/catalyst/builds/default/stage3-hppa2.0-latest.tar.bz2 |
50 |
to /usr/local/catalyst/tmp/default/stage1-hppa2.0-20150605/ (This may take some time) ... |
51 |
|
52 |
tar: XATTR support is not available |
53 |
tar: SELinux support is not available |
54 |
--- Running action sequence: unpack_snapshot |
55 |
Valid snapshot cache, skipping unpack of portage tree... |
56 |
--- Running action sequence: setup_confdir |
57 |
--- Running action sequence: portage_overlay |
58 |
--- Running action sequence: base_dirs |
59 |
--- Running action sequence: bind |
60 |
--- Running action sequence: chroot_setup |
61 |
Setting up chroot... |
62 |
|
63 |
Warning!!!! |
64 |
Overriding certain env variables may cause catastrophic failure. |
65 |
If your build fails look here first as the possible problem. |
66 |
Catalyst assumes you know what you are doing when setting |
67 |
these variables. |
68 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
69 |
You have been warned |
70 |
|
71 |
--- Running action sequence: setup_environment |
72 |
--- Running action sequence: run_local |
73 |
copying make.conf to /usr/local/catalyst/tmp/default/stage1-hppa2.0-20150605///tmp/stage1root/etc/portage |
74 |
Copying stage1-chroot.sh to /tmp |
75 |
copying stage1-chroot.sh to /usr/local/catalyst/tmp/default/stage1-hppa2.0-20150605//tmp |
76 |
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/stage1-hppa2.0-20150605//tmp |
77 |
Ensure the file has the executable bit set |
78 |
Running stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/stage1-hppa2.0-20150605/ |
79 |
>>> Regenerating /etc/ld.so.cache... |
80 |
Adding USE=' build' to make.conf for portage build |
81 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
82 |
|
83 |
Performing Global Updates |
84 |
(Could take a couple of minutes if you have a lot of binary packages.) |
85 |
|
86 |
|
87 |
Updating seed stage... |
88 |
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc |
89 |
>>> Verifying ebuild manifests |
90 |
>>> Running pre-merge checks for sys-devel/gcc-4.8.4 |
91 |
>>> Emerging (1 of 1) sys-devel/gcc-4.8.4::gentoo |
92 |
>>> Installing (1 of 1) sys-devel/gcc-4.8.4::gentoo |
93 |
>>> Recording sys-devel/gcc in "world" favorites file... |
94 |
|
95 |
* Messages for package sys-devel/gcc-4.8.4: |
96 |
|
97 |
* If you have issues with packages unable to locate libstdc++.la, |
98 |
* then try running 'fix_libtool_files.sh' on the old gcc versions. |
99 |
* You might want to review the GCC upgrade guide when moving between |
100 |
* major versions (like 4.2 to 4.3): |
101 |
* http://www.gentoo.org/doc/en/gcc-upgrading.xml |
102 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
103 |
Traceback (most recent call last): |
104 |
File "/usr/lib/python-exec/python2.7/emerge", line 50, in <module> |
105 |
retval = emerge_main() |
106 |
File "/usr/lib/python2.7/site-packages/_emerge/main.py", line 1154, in emerge_main |
107 |
return run_action(emerge_config) |
108 |
File "/usr/lib/python2.7/site-packages/_emerge/actions.py", line 2818, in run_action |
109 |
getbinpkgs="--getbinpkg" in emerge_config.opts) |
110 |
File "/usr/lib/python2.7/site-packages/portage/dbapi/bintree.py", line 631, in populate |
111 |
wantnewlockfile=1) |
112 |
File "/usr/lib/python2.7/site-packages/portage/locks.py", line 107, in lockfile |
113 |
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660) |
114 |
File "/usr/lib/python2.7/site-packages/portage/__init__.py", line 259, in __call__ |
115 |
rval = self._func(*wrapped_args, **wrapped_kwargs) |
116 |
OSError: [Errno 2] No such file or directory: '/usr/portage/packages/.Packages.portage_lockfile' |
117 |
|
118 |
!!! catalyst: run script failed. |
119 |
|
120 |
|
121 |
Traceback (most recent call last): |
122 |
File "modules/generic_stage_target.py", line 1244, in run_local |
123 |
"run script failed.",env=self.env) |
124 |
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd |
125 |
raise CatalystError,myexc |
126 |
CatalystError |
127 |
None |
128 |
|
129 |
!!! catalyst: Stage build aborting due to error. |
130 |
|
131 |
Traceback (most recent call last): |
132 |
File "/usr/lib/catalyst/catalyst", line 218, in build_target |
133 |
mytarget.run() |
134 |
File "modules/generic_stage_target.py", line 1304, in run |
135 |
apply(getattr(self,x)) |
136 |
File "modules/generic_stage_target.py", line 1249, in run_local |
137 |
raise CatalystError,"Stage build aborting due to error." |
138 |
CatalystError |
139 |
!!! catalyst: Error encountered during run of target stage1 |
140 |
Catalyst aborting.... |
141 |
lockfile does not exist '/usr/local/catalyst/tmp/default/stage1-hppa2.0-20150605/.catalyst_lock' |
142 |
|
143 |
|
144 |
|
145 |
Full build log at /tmp/catalyst-auto.53YBiW/log/hppa2.0_stage1.log |