1 |
* |
2 |
* Detected file collision(s): |
3 |
* |
4 |
* /lib/firmware/atmsar11.fw |
5 |
* /lib/firmware/tigon/tg3_tso.bin |
6 |
* /lib/firmware/tigon/tg3_tso5.bin |
7 |
* /lib/firmware/tigon/tg3.bin |
8 |
* /lib/firmware/yamaha/ds1_ctrl.fw |
9 |
* /lib/firmware/yamaha/ds1e_ctrl.fw |
10 |
* /lib/firmware/yamaha/ds1_dsp.fw |
11 |
* /lib/firmware/tehuti/bdx.bin |
12 |
* /lib/firmware/ositech/Xilinx7OD.bin |
13 |
* /lib/firmware/bnx2/bnx2-rv2p-09-6.0.17.fw |
14 |
* /lib/firmware/bnx2/bnx2-rv2p-09ax-6.0.17.fw |
15 |
* /lib/firmware/bnx2/bnx2-mips-09-6.2.1a.fw |
16 |
* /lib/firmware/bnx2/bnx2-rv2p-06-6.0.15.fw |
17 |
* /lib/firmware/bnx2/bnx2-mips-09-6.2.1b.fw |
18 |
* /lib/firmware/bnx2/bnx2-mips-06-6.2.1.fw |
19 |
* /lib/firmware/bnx2/bnx2-mips-06-6.2.3.fw |
20 |
* /lib/firmware/3com/typhoon.bin |
21 |
* /lib/firmware/adaptec/starfire_tx.bin |
22 |
* /lib/firmware/adaptec/starfire_rx.bin |
23 |
* /lib/firmware/bnx2x/bnx2x-e2-6.2.9.0.fw |
24 |
* /lib/firmware/bnx2x/bnx2x-e1-6.2.9.0.fw |
25 |
* /lib/firmware/bnx2x/bnx2x-e1h-6.2.9.0.fw |
26 |
* /lib/firmware/acenic/tg2.bin |
27 |
* /lib/firmware/acenic/tg1.bin |
28 |
* /lib/firmware/cxgb3/t3b_psram-1.1.0.bin |
29 |
* /lib/firmware/cxgb3/ael2005_opt_edc.bin |
30 |
* /lib/firmware/cxgb3/ael2020_twx_edc.bin |
31 |
* /lib/firmware/cxgb3/ael2005_twx_edc.bin |
32 |
* /lib/firmware/cxgb3/t3c_psram-1.1.0.bin |
33 |
* /lib/firmware/e100/d101m_ucode.bin |
34 |
* /lib/firmware/e100/d102e_ucode.bin |
35 |
* /lib/firmware/e100/d101s_ucode.bin |
36 |
* /lib/firmware/sun/cassini.bin |
37 |
* /lib/firmware/ess/maestro3_assp_kernel.fw |
38 |
* /lib/firmware/ess/maestro3_assp_minisrc.fw |
39 |
* /lib/firmware/kaweth/new_code_fix.bin |
40 |
* /lib/firmware/kaweth/trigger_code.bin |
41 |
* /lib/firmware/kaweth/trigger_code_fix.bin |
42 |
* /lib/firmware/kaweth/new_code.bin |
43 |
* /lib/firmware/cis/tamarack.cis |
44 |
* /lib/firmware/cis/PE-200.cis |
45 |
* /lib/firmware/cis/PE520.cis |
46 |
* /lib/firmware/cis/PCMLM28.cis |
47 |
* /lib/firmware/cis/SW_7xx_SER.cis |
48 |
* /lib/firmware/cis/SW_8xx_SER.cis |
49 |
* /lib/firmware/cis/LA-PCM.cis |
50 |
* /lib/firmware/cis/MT5634ZLX.cis |
51 |
* /lib/firmware/cis/COMpad4.cis |
52 |
* /lib/firmware/cis/3CCFEM556.cis |
53 |
* /lib/firmware/cis/RS-COM-2P.cis |
54 |
* /lib/firmware/cis/DP83903.cis |
55 |
* /lib/firmware/cis/SW_555_SER.cis |
56 |
* /lib/firmware/cis/COMpad2.cis |
57 |
* /lib/firmware/cis/3CXEM556.cis |
58 |
* /lib/firmware/cis/NE2K.cis |
59 |
* /lib/firmware/advansys/mcode.bin |
60 |
* /lib/firmware/advansys/3550.bin |
61 |
* /lib/firmware/advansys/38C1600.bin |
62 |
* /lib/firmware/advansys/38C0800.bin |
63 |
* /lib/firmware/qlogic/1280.bin |
64 |
* /lib/firmware/qlogic/12160.bin |
65 |
* /lib/firmware/qlogic/1040.bin |
66 |
* /lib/firmware/korg/k1212.dsp |
67 |
* |
68 |
* Searching all installed packages for file collisions... |
69 |
* |
70 |
* Press Ctrl-C to Stop |
71 |
* |
72 |
* None of the installed packages claim the file(s). |
73 |
* |
74 |
* Package 'sys-kernel/linux-firmware-20150812' merged despite file |
75 |
* collisions. If necessary, refer to your elog messages for the whole |
76 |
* content of the above message. |
77 |
* If you are only interested in particular firmware files, edit the saved |
78 |
* configfile and remove those that you do not want. |
79 |
* Messages for package media-sound/alsa-utils-1.0.29: |
80 |
* |
81 |
* To take advantage of the init script, and automate the process of |
82 |
* saving and restoring sound-card mixer levels you should |
83 |
* add alsasound to the boot runlevel. You can do this as |
84 |
* root like so: |
85 |
* # rc-update add alsasound boot |
86 |
* |
87 |
* The ALSA core should be built into the kernel or loaded through other |
88 |
* means. There is no longer any modular auto(un)loading in alsa-utils. |
89 |
* Messages for package app-accessibility/espeakup-0.71: |
90 |
* To get espeakup to start automatically, it is currently recommended |
91 |
* that you add it to the default run level, by giving the following |
92 |
* command as root. |
93 |
* |
94 |
* rc-update add espeakup default |
95 |
* |
96 |
* You can also set a default voice now for espeakup. |
97 |
* See /etc/conf.d/espeakup for how to do this. |
98 |
|
99 |
|
100 |
|
101 |
|
102 |
|
103 |
|
104 |
|
105 |
|
106 |
|
107 |
[32;01m*[0m <<< Callback exit status: 0 |
108 |
|
109 |
[32;01m*[0m busybox: >> Applying patches... |
110 |
[32;01m*[0m - 1.18.1-openvt.diff |
111 |
[32;01m*[0m - busybox-1.20.1-mdstart.patch |
112 |
[32;01m*[0m - busybox-1.20.2-bunzip2.patch |
113 |
[32;01m*[0m - busybox-1.20.2-glibc-sys-resource.patch |
114 |
[32;01m*[0m - busybox-1.20.2-modprobe.patch |
115 |
[32;01m*[0m - busybox-1.7.4-signal-hack.patch |
116 |
[32;01m*[0m busybox: >> Configuring... |
117 |
[32;01m*[0m busybox: >> Compiling... |
118 |
[32;01m*[0m busybox: >> Copying to cache... |
119 |
[32;01m*[0m initramfs: >> Initializing... |
120 |
[32;01m*[0m >> Appending base_layout cpio data... |
121 |
[32;01m*[0m >> Appending auxilary cpio data... |
122 |
[32;01m*[0m >> Copying keymaps |
123 |
[32;01m*[0m >> Appending busybox cpio data... |
124 |
[32;01m*[0m >> Appending lvm cpio data... |
125 |
[32;01m*[0m LVM: Adding support (compiling binaries)... |
126 |
[32;01m*[0m lvm: >> Applying patches... |
127 |
[32;01m*[0m - lvm2-2.02.72-no-export-dynamic.patch |
128 |
[32;01m*[0m lvm: >> Configuring... |
129 |
[32;01m*[0m lvm: >> Compiling... |
130 |
[32;01m*[0m >> Copying to bincache... |
131 |
[32;01m*[0m >> Appending dmraid cpio data... |
132 |
[32;01m*[0m DMRAID: Adding support (compiling binaries)... |
133 |
[32;01m*[0m lvm: >> Using cache |
134 |
[32;01m*[0m dmraid: >> Configuring... |
135 |
[32;01m*[0m dmraid: >> Compiling... |
136 |
[32;01m*[0m >> Copying to bincache... |
137 |
[32;01m*[0m >> Appending mdadm cpio data... |
138 |
[32;01m*[0m MDADM: Skipping inclusion of mdadm.conf |
139 |
[32;01m*[0m MDADM: Adding support (compiling binaries)... |
140 |
[32;01m*[0m mdadm: >> Compiling... |
141 |
[32;01m*[0m >> Copying to bincache... |
142 |
[32;01m*[0m >> Appending modules cpio data... |
143 |
[32;01m*[0m >> Appending blkid cpio data... |
144 |
[32;01m*[0m >> Appending modprobed cpio data... |
145 |
[32;01m*[0m >> Appending linker cpio data... |
146 |
[32;01m*[0m >> Finalizing cpio... |
147 |
[32;01m*[0m >> Compressing cpio data (.xz)... |
148 |
[32;01m*[0m Creating minimal kernel package |
149 |
[32;01m*[0m Creating modules package |
150 |
[32;01m*[0m |
151 |
[32;01m*[0m Kernel compiled successfully! |
152 |
[32;01m*[0m |
153 |
[32;01m*[0m Required Kernel Parameters: |
154 |
[32;01m*[0m root=/dev/$ROOT |
155 |
[32;01m*[0m |
156 |
[32;01m*[0m Where $ROOT is the device node for your root partition as the |
157 |
[32;01m*[0m one specified in /etc/fstab |
158 |
[32;01m*[0m |
159 |
[32;01m*[0m If you require Genkernel's hardware detection features; you MUST |
160 |
[32;01m*[0m tell your bootloader to use the provided INITRAMFS file. |
161 |
|
162 |
[33;01m*[0m WARNING... WARNING... WARNING... |
163 |
[33;01m*[0m Additional kernel cmdline arguments that *may* be required to boot properly... |
164 |
[33;01m*[0m add "dolvm" for lvm support |
165 |
[33;01m*[0m add "dodmraid" for dmraid support |
166 |
[33;01m*[0m add "domdadm" for RAID support |
167 |
[33;01m*[0m or "dodmraid=<additional options>" |
168 |
[33;01m*[0m With support for several ext* filesystems available, it may be needed to |
169 |
[33;01m*[0m add "rootfstype=ext3" or "rootfstype=ext4" to the list of boot parameters. |
170 |
|
171 |
[32;01m*[0m Do NOT report kernel bugs as genkernel bugs unless your bug |
172 |
[32;01m*[0m is about the default genkernel configuration... |
173 |
[32;01m*[0m |
174 |
[32;01m*[0m Make sure you have the latest ~arch genkernel before reporting bugs. |
175 |
removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151221/tmp/kmerge.sh from the chroot |
176 |
removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151221/tmp/chroot-functions.sh from the chroot |
177 |
Copying post-kmerge.sh to /tmp |
178 |
copying post-kmerge.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151221/tmp |
179 |
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151221/tmp |
180 |
Ensure the file has the executable bit set |
181 |
Running post-kmerge.sh in chroot: |
182 |
chroot /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151221 /tmp/post-kmerge.sh |
183 |
removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151221/tmp/post-kmerge.sh from the chroot |
184 |
removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151221/tmp/chroot-functions.sh from the chroot |
185 |
22 Dec 2015 14:31:51 UTC: NOTICE : --- Running action sequence: bootloader |
186 |
touch: cannot touch '/home/release/buildroot/amd64-dev/builds/hardened/livecd-stage2-amd64-20151221//livecd': No such file or directory |
187 |
cp: cannot create regular file '/home/release/buildroot/amd64-dev/builds/hardened/livecd-stage2-amd64-20151221/': Not a directory |
188 |
tar: /home/release/buildroot/amd64-dev/builds/hardened/livecd-stage2-amd64-20151221: Cannot open: No such file or directory |
189 |
tar: Error is not recoverable: exiting now |
190 |
Couldn't extract cdtar /usr/share/catalyst/livecd/cdtar/isolinux-elilo-memtest86+-cdtar.tar.bz2 |
191 |
22 Dec 2015 14:31:51 UTC: ERROR : CatalystError: cmd() NON-zero return value from: Bootloader script failed. |
192 |
22 Dec 2015 14:31:51 UTC: ERROR : CatalystError: Script aborting due to error. |
193 |
22 Dec 2015 14:31:51 UTC: ERROR : Exception running action sequence bootloader |
194 |
Traceback (most recent call last): |
195 |
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1399, in run |
196 |
getattr(self, x)() |
197 |
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1639, in bootloader |
198 |
raise CatalystError("Script aborting due to error.") |
199 |
CatalystError |
200 |
22 Dec 2015 14:31:52 UTC: NOTICE : Cleaning up... Running unbind() |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /home/release/tmp/run/catalyst-auto.cZbf4u/log/hardened_admincd-stage2.log |