[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - hardened/admincd-stage1.spec

* Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package app-admin/hddtemp-0.3_beta15-r26:
 * In order to update your hddtemp database, run:
 * emerge --config =app-admin/hddtemp-0.3_beta15-r26 or update-hddtemp.db (if USE
 * network-cron is enabled)
 * 
 * If your hard drive is not recognized by hddtemp, please consider
 * submitting your HDD info for inclusion into the Gentoo hddtemp
 * database by filing a bug at https://bugs.gentoo.org/
 * 
 * If hddtemp complains but finds your HDD temperature sensor, use the
 * --quiet option to suppress the warning.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/hddtemp-0.3_beta15-r26/README.gentoo*
 * for future reference)
 * Messages for package app-crypt/bcwipe-1.9.13:
 * The BestCrypt drivers are not free - Please purchace a license from 
 * http://www.jetico.com/
 * full details /usr/share/doc/bcwipe-1.9.13/bcwipe-help/wu_licen.htm
 * Messages for package net-misc/vconfig-1.9:
 * MTU problems exist for many ethernet drivers.
 * Reduce the MTU on the interface to 1496 to work around them.
 * Messages for package sys-apps/chname-1.0-r2:
 * Note: chname requires a or later kernel with CONFIG_UTS_NS=y.
 * Messages for package sys-block/tw_cli-10.2:
 * This binary supports should support ALL cards, including, but not
 * limited to the following series:
 * 
 * PATA: 6xxx, 72xx, 74xx, 78xx, 7000, 7500, 7506
 * SATA: 8006, 8500, 8506, 9500S, 9550SX, 9590SE,
 *       9550SXU, 9650SE, 9650SE-{24M8,4LPME},
 *       9690SA, 9750
 * 
 * Release notes for this version are available at:
 * http://www.lsi.com/DistributionSystem/AssetDocument/10.2_Release_Notes_Web.pdf
 * Messages for package sys-power/acpid-2.0.28:
 * 
 * You may wish to read the Gentoo Linux Power Management Guide,
 * which can be found online at:
 * https://wiki.gentoo.org/wiki/Power_management/Guide
 * 
 * You should reboot the system now to get /run mounted with tmpfs!
 * Messages for package app-accessibility/brltty-5.2-r1:
 * 
 * please be sure /etc/brltty.conf is correct for your system.
 * 
 * To make brltty start on boot, type this command as root:
 * 
 * rc-update add brltty boot
 * Messages for package net-fs/cifs-utils-6.4:
 * You must enable CIFS support in your kernel config, 
 * to be able to mount samba shares. You can find it at
 * 
 *   File systems
 * 	Network File Systems
 * 			CIFS support
 * 
 * and recompile your kernel ...
 * setuid use flag was dropped due to multiple security implications
 * such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
 * You are free to set setuid flags by yourself
 * Messages for package app-benchmarks/dbench-4.0:
 * You can find the client.txt file in /usr/share/dbench.
 * Messages for package net-dialup/ppp-2.4.7-r3:
 * Pon, poff and plog scripts have been supplied for experienced users.
 * Users needing particular scripts (ssh,rsh,etc.) should check out the
 * /usr/share/doc/ppp-2.4.7-r3/scripts directory.
 * Messages for package app-misc/screen-4.4.0:
 * Some dangerous key bindings have been removed or changed to more safe values.
 * We enable some xterm hacks in our default screenrc, which might break some
 * applications. Please check /etc/screenrc for information on these changes.
 * This revision changes the screen socket location to /tmp/screen
 * Messages for package net-vpn/openvpn-2.4.4:
 * The openvpn init script expects to find the configuration file
 * openvpn.conf in /etc/openvpn along with any extra files it may need.
 * 
 * To create more VPNs, simply create a new .conf file for it and
 * then create a symlink to the openvpn init script from a link called
 * openvpn.newconfname - like so
 *    cd /etc/openvpn
 *    nano foo.conf
 *    cd /etc/init.d
 *    ln -s openvpn openvpn.foo
 * 
 * You can then treat openvpn.foo as any other service, so you can
 * stop one vpn and start another if you need to.
 * Messages for package dev-python/pyjwt-1.5.3:
 * Available optional features:
 *   dev-python/cryptography for cryptography
 *   dev-python/flake8 for flake8
 * flake8 feature requires 'flake8-import-order' and 'pep8-naming', which are not in portage yet
 * Messages for package app-portage/gentoolkit-0.4.0:
 * 
 * For further information on gentoolkit, please read the gentoolkit
 * guide: https://wiki.gentoo.org/wiki/Gentoolkit
 * 
 * Another alternative to equery is app-portage/portage-utils
 * 
 * Additional tools that may be of interest:
 * 
 *     app-admin/eclean-kernel
 *     app-portage/diffmask
 *     app-portage/flaggie
 *     app-portage/install-mask
 *     app-portage/portpeek
 *     app-portage/smart-live-rebuild
 * Messages for package dev-python/jinja-2.9.5:
 * For i18n support, please emerge dev-python/Babel.
 * Messages for package app-emacs/emacs-common-gentoo-1.6:
 * All site initialisation for Gentoo-installed packages is added to
 * /usr/share/emacs/site-lisp/site-gentoo.el. In order for this site
 * initialisation to be loaded for all users automatically, a default
 * site startup file /etc/emacs/site-start.el is installed. You are
 * responsible for maintenance of this file.
 * 
 * Alternatively, individual users can add the following command:
 * 
 * (require 'site-gentoo)
 * 
 * to their ~/.emacs initialisation files, or, for greater flexibility,
 * users may load single package-specific initialisation files from the
 * /usr/share/emacs/site-lisp/site-gentoo.d/ directory.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/emacs-common-gentoo-1.6/README.gentoo*
 * for future reference)
 * Messages for package app-editors/emacs-25.3:
 * ERROR: app-editors/emacs-25.3::gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=app-editors/emacs-25.3::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=app-editors/emacs-25.3::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/app-editors/emacs-25.3/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-editors/emacs-25.3/temp/environment'.
 * Working directory: '/var/tmp/portage/app-editors/emacs-25.3/work/emacs-25.3'
 * S: '/var/tmp/portage/app-editors/emacs-25.3/work/emacs-25.3'








































05 Jan 2018 09:17:54 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-admin/sysstat', 'app-admin/testdisk', 'app-arch/bzip2', 'app-arch/cpio', 'app-arch/dpkg', 'app-arch/gzip', 'app-arch/mt-st', 'app-arch/p7zip', 'app-arch/pbzip2', 'app-arch/tar', 'app-arch/unrar', 'app-arch/unzip', 'app-backup/duplicity', 'app-benchmarks/bonnie', 'app-benchmarks/bonnie++', 'app-benchmarks/dbench', 'app-benchmarks/iozone', 'app-benchmarks/stress', 'app-benchmarks/tiobench', 'app-crypt/bcwipe', 'app-crypt/gnupg', 'app-crypt/pinentry', 'app-editors/emacs', 'app-editors/hexcurse', 'app-editors/hexedit', 'app-editors/mg', 'app-editors/vim', 'app-emacs/ebuild-mode', 'app-emulation/cloud-init', 'app-emulation/xen-tools', 'app-misc/colordiff', 'app-misc/mc', 'app-misc/pax-utils', 'app-misc/screen', 'app-misc/tmux', '
 app-portage/eix', 'app-portage/gentoolkit', 'app-portage/mirrorselect', 'app-portage/portage-utils', 'app-shells/bash-completion', 'app-shells/gentoo-bashcomp', 'app-shells/zsh', 'app-text/tree', 'app-text/dos2unix', 'app-text/wgetpaste', 'app-vim/gentoo-syntax', 'dev-lang/perl', 'dev-lang/python', 'dev-vcs/git', 'media-gfx/fbgrab', 'net-analyzer/gnu-netcat', 'net-analyzer/iptraf-ng', 'net-analyzer/netcat6', 'net-analyzer/tcptraceroute', 'net-analyzer/traceroute', 'net-analyzer/traceroute-nanog', 'net-analyzer/tcpdump', 'net-analyzer/nmap', 'net-dialup/mingetty', 'net-dialup/minicom', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-dns/bind-tools', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-ftp/ftp', 'net-ftp/ncftp', 'net-irc/irssi', 'net-misc/curl', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/ntp', 'net-misc/openssh', 'net-misc/rdate', 'net-misc/rsync', 'net-misc/telnet-bsd', 'net-misc/vconfig', 'net-misc/wget', 'net-misc/whois', 'net-proxy/dante', '
 net-proxy/tsocks', 'net-vpn/openvpn', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/rfkill', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/arrayprobe', 'sys-apps/acl', 'sys-apps/attr', 'sys-apps/busybox', 'sys-apps/cciss_vol_status', 'sys-apps/chname', 'sys-apps/coreutils', 'sys-apps/dcfldd', 'sys-apps/diffutils', 'sys-apps/dmidecode', 'sys-apps/dstat', 'sys-apps/ethtool', 'sys-apps/file', 'sys-apps/findutils', 'sys-apps/flashrom', 'sys-apps/fxload', 'sys-apps/gawk', 'sys-apps/gptfdisk', 'sys-apps/grep', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/ipmitool', 'sys-apps/iproute2', 'sys-apps/less', 'sys-apps/man', 'sys-apps/man-pages', 'sys-apps/man-pages-posix', 'sys-apps/memtester', 'sys-apps/mlocate', 'sys-apps/netplug', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/sed', 'sys-apps/setserial', 'sys-apps/sg3_utils', 'sys-apps/smartmontools', 'sys-apps/usbutils', 'sys-apps/which', 'sys-apps/x86info', 'sys-block/aoetools', 'sys-block/f
 io', 'sys-block/mtx', 'sys-block/open-iscsi', 'sys-block/parted', 'sys-block/partimage', 'sys-block/tw_cli', 'sys-boot/grub', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/ddrescue', 'sys-fs/dislocker', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/exfat-utils', 'sys-fs/ext3grep', 'sys-fs/extundelete', 'sys-fs/f2fs-tools', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/nilfs-utils', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'sys-libs/libsmbios', 'sys-power/acpid', 'sys-process/htop', 'sys-process/lsof', 'sys-process/iotop', 'sys-process/procps', 'sys-process/psmisc', 'www-client/links', 'app-misc/livecd-tools']) exited 1
05 Jan 2018 09:17:54 UTC: ERROR   : CatalystError: livecdbuild aborting due to error.
05 Jan 2018 09:17:54 UTC: ERROR   : Exception running action sequence build_packages
Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1550, in build_packages
    cmd(command, env=self.env)
  File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-admin/sysstat', 'app-admin/testdisk', 'app-arch/bzip2', 'app-arch/cpio', 'app-arch/dpkg', 'app-arch/gzip', 'app-arch/mt-st', 'app-arch/p7zip', 'app-arch/pbzip2', 'app-arch/tar', 'app-arch/unrar', 'app-arch/unzip', 'app-backup/duplicity', 'app-benchmarks/bonnie', 'app-benchmarks/bonnie++', 'app-benchmarks/dbench', 'app-benchmarks/iozone', 'app-benchmarks/stress', 'app-benchmarks/tiobench', 'app-crypt/bcwipe', 'app-crypt/gnupg', 'app-crypt/pinentry', 'app-editors/emacs', 'app-editors/hexcurse', 'app-editors/hexedit', 'app-editors/mg', 'app-editors/vim', 'app-emacs/ebuild-mode', 'app-emulation/cloud-init', 'app-emulation/xen-tools', 'app-misc/colordiff', 'app-misc/mc', 'app-misc/pax-utils', 'app-misc/screen', 'app-misc/tmux', 'app-portage/eix', '
 app-portage/gentoolkit', 'app-portage/mirrorselect', 'app-portage/portage-utils', 'app-shells/bash-completion', 'app-shells/gentoo-bashcomp', 'app-shells/zsh', 'app-text/tree', 'app-text/dos2unix', 'app-text/wgetpaste', 'app-vim/gentoo-syntax', 'dev-lang/perl', 'dev-lang/python', 'dev-vcs/git', 'media-gfx/fbgrab', 'net-analyzer/gnu-netcat', 'net-analyzer/iptraf-ng', 'net-analyzer/netcat6', 'net-analyzer/tcptraceroute', 'net-analyzer/traceroute', 'net-analyzer/traceroute-nanog', 'net-analyzer/tcpdump', 'net-analyzer/nmap', 'net-dialup/mingetty', 'net-dialup/minicom', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-dns/bind-tools', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-ftp/ftp', 'net-ftp/ncftp', 'net-irc/irssi', 'net-misc/curl', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/ntp', 'net-misc/openssh', 'net-misc/rdate', 'net-misc/rsync', 'net-misc/telnet-bsd', 'net-misc/vconfig', 'net-misc/wget', 'net-misc/whois', 'net-proxy/dante', 'net-proxy/tsocks', 
 'net-vpn/openvpn', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/rfkill', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/arrayprobe', 'sys-apps/acl', 'sys-apps/attr', 'sys-apps/busybox', 'sys-apps/cciss_vol_status', 'sys-apps/chname', 'sys-apps/coreutils', 'sys-apps/dcfldd', 'sys-apps/diffutils', 'sys-apps/dmidecode', 'sys-apps/dstat', 'sys-apps/ethtool', 'sys-apps/file', 'sys-apps/findutils', 'sys-apps/flashrom', 'sys-apps/fxload', 'sys-apps/gawk', 'sys-apps/gptfdisk', 'sys-apps/grep', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/ipmitool', 'sys-apps/iproute2', 'sys-apps/less', 'sys-apps/man', 'sys-apps/man-pages', 'sys-apps/man-pages-posix', 'sys-apps/memtester', 'sys-apps/mlocate', 'sys-apps/netplug', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/sed', 'sys-apps/setserial', 'sys-apps/sg3_utils', 'sys-apps/smartmontools', 'sys-apps/usbutils', 'sys-apps/which', 'sys-apps/x86info', 'sys-block/aoetools', 'sys-block/fio', 'sys-block/mtx
 ', 'sys-block/open-iscsi', 'sys-block/parted', 'sys-block/partimage', 'sys-block/tw_cli', 'sys-boot/grub', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/ddrescue', 'sys-fs/dislocker', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/exfat-utils', 'sys-fs/ext3grep', 'sys-fs/extundelete', 'sys-fs/f2fs-tools', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/nilfs-utils', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'sys-libs/libsmbios', 'sys-power/acpid', 'sys-process/htop', 'sys-process/lsof', 'sys-process/iotop', 'sys-process/procps', 'sys-process/psmisc', 'www-client/links', 'app-misc/livecd-tools']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
    getattr(self, x)()
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1557, in build_packages
    "build aborting due to error.")
catalyst.support.CatalystError: livecdbuild aborting due to error.
05 Jan 2018 09:17:54 UTC: NOTICE  : Cleaning up... Running unbind()
Command exited with non-zero status 2
980.32user 333.72system 19:34.72elapsed 111%CPU (0avgtext+0avgdata 604064maxresident)k
206600inputs+4418032outputs (0major+50385238minor)pagefaults 0swaps



Full build log at /release/tmp/run/catalyst-auto.20180104T214501Z.E7NpSU/log/hardened_admincd-stage1.log