[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - hardened/admincd-stage1-selinux.spec

* Messages for package sys-fs/eudev-3.1.5:

 * 
 * As of 2013-01-29, eudev-3.1.5 provides the new interface renaming functionality,
 * as described in the URL below:
 * https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
 * 
 * This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
 * between the default or user-modified choice of sys-fs/udev.  If you wish to disable
 * this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
 * exists: touch /etc/udev/rules.d/80-net-name-slot.rules
 * 

 * Messages for package sys-boot/grub-2.02_beta2-r9:

 * To avoid automounting and auto(un)installing with /boot,
 * just export the DONT_MOUNT_BOOT variable.

 * Messages for package app-crypt/bcwipe-1.9.8:

 * The BestCrypt drivers are not free - Please purchace a license from 
 * http://www.jetico.com/
 * full details /usr/share/doc/bcwipe-1.9.8/html/bcwipe-help/wu_licen.htm

 * Messages for package net-misc/vconfig-1.9:

 * MTU problems exist for many ethernet drivers.
 * Reduce the MTU on the interface to 1496 to work around them.

 * Messages for package sys-apps/keyutils-1.5.9-r1:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package sys-apps/chname-1.0-r2:

 * Note: chname requires a or later kernel with CONFIG_UTS_NS=y.

 * Messages for package sys-block/tw_cli-10.2:

 * This binary supports should support ALL cards, including, but not
 * limited to the following series:
 * 
 * PATA: 6xxx, 72xx, 74xx, 78xx, 7000, 7500, 7506
 * SATA: 8006, 8500, 8506, 9500S, 9550SX, 9590SE,
 *       9550SXU, 9650SE, 9650SE-{24M8,4LPME},
 *       9690SA, 9750
 * 
 * Release notes for this version are available at:
 * http://www.lsi.com/DistributionSystem/AssetDocument/10.2_Release_Notes_Web.pdf
 * Upstream's 10.2 release is missing the tw_cli manpage.

 * Messages for package dev-lang/perl-5.22.2:

 * UPDATE THE PERL MODULES:
 * After updating dev-lang/perl the installed Perl modules
 * have to be re-installed. In most cases, this is done automatically
 * by the package manager, but subsequent steps are still recommended
 * to ensure system consistency.
 * 
 * You should start with a depclean to remove any unused perl dependencies
 * that may confuse portage in future. Regular depcleans are also encouraged
 * as part of your regular update cycle, as that will keep perl upgrades working.
 * Recommended: emerge --depclean -va
 * 
 * You should then call perl-cleaner to clean up any old files and trigger any
 * remaining rebuilds portage may have missed.
 * Use: perl-cleaner --all

 * Messages for package sys-firmware/ipxe-1.0.0_p20130925:

 * Your configuration for sys-firmware/ipxe-1.0.0_p20130925 has been saved in 
 * /etc/portage/savedconfig/sys-firmware/ipxe-1.0.0_p20130925 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]

 * Messages for package net-fs/cifs-utils-6.4:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * You must enable CIFS support in your kernel config, 
 * to be able to mount samba shares. You can find it at
 * 
 *   File systems
 * 	Network File Systems
 * 			CIFS support
 * 
 * and recompile your kernel ...
 * setuid use flag was dropped due to multiple security implications
 * such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
 * You are free to set setuid flags by yourself

 * Messages for package sys-process/iotop-0.6:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package net-dialup/ppp-2.4.7:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Pon, poff and plog scripts have been supplied for experienced users.
 * Users needing particular scripts (ssh,rsh,etc.) should check out the
 * /usr/share/doc/ppp-2.4.7/scripts directory.

 * Messages for package sys-apps/busybox-1.24.2:

 * Could not locate user configfile, so we will save a default one
 * You cannot have USE='static pam'.  Assuming static is more important.
 * Your configuration for sys-apps/busybox-1.24.2 has been saved in 
 * /etc/portage/savedconfig/sys-apps/busybox-1.24.2 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]

 * Messages for package net-dialup/rp-pppoe-3.11-r3:

 * Use pppoe-setup to configure your dialup connection
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/rp-pppoe-3.11-r3/README.gentoo*
 * for future reference)

 * Messages for package net-misc/bridge-utils-1.5:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 *   CONFIG_BRIDGE is required to get bridge devices in the kernel
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.

 * Messages for package dev-util/ctags-5.8:

 * You can set the version to be started by /usr/bin/ctags through
 * the ctags eselect module. "man ctags.eselect" for details.

 * Messages for package app-emacs/emacs-common-gentoo-1.5:

 * All site initialisation for Gentoo-installed packages is added to
 * /usr/share/emacs/site-lisp/site-gentoo.el. In order for this site
 * initialisation to be loaded for all users automatically, a default
 * site startup file /etc/emacs/site-start.el is installed. You are
 * responsible for maintenance of this file.
 * 
 * Alternatively, individual users can add the following command:
 * 
 * (require 'site-gentoo)
 * 
 * to their ~/.emacs initialisation files, or, for greater flexibility,
 * users may load single package-specific initialisation files from the
 * /usr/share/emacs/site-lisp/site-gentoo.d/ directory.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/emacs-common-gentoo-1.5/README.gentoo*
 * for future reference)

 * Messages for package app-shells/zsh-5.2:

 * ERROR: app-shells/zsh-5.2::gentoo failed (install phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=app-shells/zsh-5.2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=app-shells/zsh-5.2::gentoo'`.
 * The complete build log is located at '/home/release/tmp/logs/app-shells:zsh-5.2:20160920-071329.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/app-shells/zsh-5.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-shells/zsh-5.2/temp/environment'.
 * Working directory: '/var/tmp/portage/app-shells/zsh-5.2/work/zsh-5.2'
 * S: '/var/tmp/portage/app-shells/zsh-5.2/work/zsh-5.2'

!!! existing preserved libs found
20 Sep 2016 07:14:59 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-admin/sysstat', 'app-admin/testdisk', 'app-arch/bzip2', 'app-arch/cpio', 'app-arch/gzip', 'app-arch/mt-st', 'app-arch/p7zip', 'app-arch/pbzip2', 'app-arch/rar', 'app-arch/tar', 'app-arch/unrar', 'app-arch/unzip', 'app-backup/duplicity', 'app-benchmarks/bonnie', 'app-benchmarks/bonnie++', 'app-benchmarks/dbench', 'app-benchmarks/iozone', 'app-benchmarks/stress', 'app-benchmarks/tiobench', 'app-crypt/bcwipe', 'app-crypt/gnupg', 'app-crypt/pinentry', 'app-editors/emacs', 'app-editors/hexcurse', 'app-editors/hexedit', 'app-editors/mg', 'app-editors/vim', 'app-emacs/ebuild-mode', 'app-emulation/xen-tools', 'app-misc/colordiff', 'app-misc/mc', 'app-misc/pax-utils', 'app-misc/screen', 'app-misc/tmux', 'app-misc/vlock', 'app-portage
 /eix', 'app-portage/gentoolkit', 'app-portage/mirrorselect', 'app-portage/portage-utils', 'app-shells/bash-completion', 'app-shells/gentoo-bashcomp', 'app-shells/zsh', 'app-text/tree', 'app-text/dos2unix', 'app-text/wgetpaste', 'app-vim/gentoo-syntax', 'dev-lang/perl', 'dev-lang/python', 'media-gfx/fbgrab', 'net-analyzer/gnu-netcat', 'net-analyzer/iptraf-ng', 'net-analyzer/netcat6', 'net-analyzer/tcptraceroute', 'net-analyzer/traceroute', 'net-analyzer/traceroute-nanog', 'net-analyzer/tcpdump', 'net-analyzer/nmap', 'net-dialup/mingetty', 'net-dialup/minicom', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-dns/bind-tools', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-ftp/ftp', 'net-ftp/ncftp', 'net-irc/irssi', 'net-misc/curl', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/ntp', 'net-misc/openssh', 'net-misc/openvpn', 'net-misc/rdate', 'net-misc/rsync', 'net-misc/telnet-bsd', 'net-misc/vconfig', 'net-misc/wget', 'net-misc/whois', 'net-proxy/dante', 'net-pr
 oxy/tsocks', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/rfkill', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/apmd', 'sys-apps/arrayprobe', 'sys-apps/acl', 'sys-apps/attr', 'sys-apps/busybox', 'sys-apps/cciss_vol_status', 'sys-apps/chname', 'sys-apps/coreutils', 'sys-apps/dcfldd', 'sys-apps/diffutils', 'sys-apps/dmidecode', 'sys-apps/dstat', 'sys-apps/ethtool', 'sys-apps/file', 'sys-apps/findutils', 'sys-apps/flashrom', 'sys-apps/fxload', 'sys-apps/gawk', 'sys-apps/gptfdisk', 'sys-apps/grep', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/ipmitool', 'sys-apps/iproute2', 'sys-apps/less', 'sys-apps/man', 'sys-apps/man-pages', 'sys-apps/man-pages-posix', 'sys-apps/memtester', 'sys-apps/mlocate', 'sys-apps/netplug', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/sed', 'sys-apps/setserial', 'sys-apps/sg3_utils', 'sys-apps/smartmontools', 'sys-apps/usbutils', 'sys-apps/which', 'sys-apps/x86info', 'sys-block/aoetools', 'sys-block/fio', 'sy
 s-block/mtx', 'sys-block/open-iscsi', 'sys-block/parted', 'sys-block/partimage', 'sys-block/tw_cli', 'sys-boot/grub', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/ddrescue', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/ext3grep', 'sys-fs/extundelete', 'sys-fs/f2fs-tools', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'sys-power/acpid', 'sys-process/htop', 'sys-process/lsof', 'sys-process/iotop', 'sys-process/procps', 'sys-process/psmisc', 'www-client/links', 'app-misc/livecd-tools']) exited 1
20 Sep 2016 07:15:00 UTC: ERROR   : CatalystError: livecdbuild aborting due to error.
20 Sep 2016 07:15:00 UTC: ERROR   : Exception running action sequence build_packages
Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1487, in build_packages
    cmd(command, env=self.env)
  File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-admin/sysstat', 'app-admin/testdisk', 'app-arch/bzip2', 'app-arch/cpio', 'app-arch/gzip', 'app-arch/mt-st', 'app-arch/p7zip', 'app-arch/pbzip2', 'app-arch/rar', 'app-arch/tar', 'app-arch/unrar', 'app-arch/unzip', 'app-backup/duplicity', 'app-benchmarks/bonnie', 'app-benchmarks/bonnie++', 'app-benchmarks/dbench', 'app-benchmarks/iozone', 'app-benchmarks/stress', 'app-benchmarks/tiobench', 'app-crypt/bcwipe', 'app-crypt/gnupg', 'app-crypt/pinentry', 'app-editors/emacs', 'app-editors/hexcurse', 'app-editors/hexedit', 'app-editors/mg', 'app-editors/vim', 'app-emacs/ebuild-mode', 'app-emulation/xen-tools', 'app-misc/colordiff', 'app-misc/mc', 'app-misc/pax-utils', 'app-misc/screen', 'app-misc/tmux', 'app-misc/vlock', 'app-portage/eix', 'app-portage
 /gentoolkit', 'app-portage/mirrorselect', 'app-portage/portage-utils', 'app-shells/bash-completion', 'app-shells/gentoo-bashcomp', 'app-shells/zsh', 'app-text/tree', 'app-text/dos2unix', 'app-text/wgetpaste', 'app-vim/gentoo-syntax', 'dev-lang/perl', 'dev-lang/python', 'media-gfx/fbgrab', 'net-analyzer/gnu-netcat', 'net-analyzer/iptraf-ng', 'net-analyzer/netcat6', 'net-analyzer/tcptraceroute', 'net-analyzer/traceroute', 'net-analyzer/traceroute-nanog', 'net-analyzer/tcpdump', 'net-analyzer/nmap', 'net-dialup/mingetty', 'net-dialup/minicom', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-dns/bind-tools', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-ftp/ftp', 'net-ftp/ncftp', 'net-irc/irssi', 'net-misc/curl', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/ntp', 'net-misc/openssh', 'net-misc/openvpn', 'net-misc/rdate', 'net-misc/rsync', 'net-misc/telnet-bsd', 'net-misc/vconfig', 'net-misc/wget', 'net-misc/whois', 'net-proxy/dante', 'net-proxy/tsocks', 'net-w
 ireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/rfkill', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/apmd', 'sys-apps/arrayprobe', 'sys-apps/acl', 'sys-apps/attr', 'sys-apps/busybox', 'sys-apps/cciss_vol_status', 'sys-apps/chname', 'sys-apps/coreutils', 'sys-apps/dcfldd', 'sys-apps/diffutils', 'sys-apps/dmidecode', 'sys-apps/dstat', 'sys-apps/ethtool', 'sys-apps/file', 'sys-apps/findutils', 'sys-apps/flashrom', 'sys-apps/fxload', 'sys-apps/gawk', 'sys-apps/gptfdisk', 'sys-apps/grep', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/ipmitool', 'sys-apps/iproute2', 'sys-apps/less', 'sys-apps/man', 'sys-apps/man-pages', 'sys-apps/man-pages-posix', 'sys-apps/memtester', 'sys-apps/mlocate', 'sys-apps/netplug', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/sed', 'sys-apps/setserial', 'sys-apps/sg3_utils', 'sys-apps/smartmontools', 'sys-apps/usbutils', 'sys-apps/which', 'sys-apps/x86info', 'sys-block/aoetools', 'sys-block/fio', 'sys-block/mtx', 'sys-
 block/open-iscsi', 'sys-block/parted', 'sys-block/partimage', 'sys-block/tw_cli', 'sys-boot/grub', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/ddrescue', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/ext3grep', 'sys-fs/extundelete', 'sys-fs/f2fs-tools', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'sys-power/acpid', 'sys-process/htop', 'sys-process/lsof', 'sys-process/iotop', 'sys-process/procps', 'sys-process/psmisc', 'www-client/links', 'app-misc/livecd-tools']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
    getattr(self, x)()
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1493, in build_packages
    "build aborting due to error.")
catalyst.support.CatalystError: livecdbuild aborting due to error.
20 Sep 2016 07:15:00 UTC: NOTICE  : Cleaning up... Running unbind()
Command exited with non-zero status 2
3178.80user 444.92system 44:57.95elapsed 134%CPU (0avgtext+0avgdata 881664maxresident)k
0inputs+17077168outputs (0major+336537466minor)pagefaults 0swaps



Full build log at /home/release/tmp/run/catalyst-auto.20160919.5uZX4y/log/hardened_admincd-stage1-selinux.log