1 |
Binary redistribution enabled |
2 |
Package cache support enabled. |
3 |
Preserving libs during unmerge. |
4 |
Seed cache support enabled. |
5 |
Snapshot cache support enabled. |
6 |
Envscript support enabled. |
7 |
Using target: stage1 |
8 |
Building natively for amd64 |
9 |
stage1 root path is /tmp/stage1root |
10 |
Source path set to /release/buildroot/amd64-dev/builds/hardened/stage3-amd64-hardened-latest.tar.bz2 |
11 |
Caching snapshot to /release/tmp/snapshots/20150122/ |
12 |
The autoresume path is /release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage1-amd64-hardened-20150122/ |
13 |
stage1 stage path is /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-20150122/tmp/stage1root |
14 |
Location of the package cache is /release/buildroot/amd64-dev/packages/hardened/stage1-amd64-hardened-20150122/ |
15 |
Checking for processes running in chroot and killing them. |
16 |
Removing AutoResume Points: ... |
17 |
Emptying directory /release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage1-amd64-hardened-20150122/ |
18 |
>>> Waiting 10 seconds before starting... |
19 |
>>> (Control-C to abort)... |
20 |
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1 |
21 |
clearing autoresume ... |
22 |
Removing AutoResume Points: ... |
23 |
Emptying directory /release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage1-amd64-hardened-20150122/ |
24 |
clearing chroot ... |
25 |
Emptying directory /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-20150122/ |
26 |
clearing package cache ... |
27 |
purging the pkgcache ... |
28 |
clearing kerncache ... |
29 |
--- Running action sequence: unpack |
30 |
Referenced SEEDCACHE does not appear to be a directory, trying to untar... |
31 |
No Valid Resume point detected, cleaning up... |
32 |
Removing AutoResume Points: ... |
33 |
Emptying directory /release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage1-amd64-hardened-20150122/ |
34 |
Emptying directory /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-20150122/ |
35 |
|
36 |
Starting tar extract from /release/buildroot/amd64-dev/builds/hardened/stage3-amd64-hardened-latest.tar.bz2 |
37 |
to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-20150122/ (This may take some time) ... |
38 |
|
39 |
tar: XATTR support is not available |
40 |
tar: SELinux support is not available |
41 |
--- Running action sequence: unpack_snapshot |
42 |
Valid snapshot cache, skipping unpack of portage tree... |
43 |
--- Running action sequence: setup_confdir |
44 |
--- Running action sequence: portage_overlay |
45 |
--- Running action sequence: base_dirs |
46 |
--- Running action sequence: bind |
47 |
--- Running action sequence: chroot_setup |
48 |
Setting up chroot... |
49 |
|
50 |
Warning!!!! |
51 |
Overriding certain env variables may cause catastrophic failure. |
52 |
If your build fails look here first as the possible problem. |
53 |
Catalyst assumes you know what you are doing when setting |
54 |
these variables. |
55 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
56 |
You have been warned |
57 |
|
58 |
--- Running action sequence: setup_environment |
59 |
--- Running action sequence: run_local |
60 |
copying make.conf to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-20150122///tmp/stage1root/etc/portage |
61 |
Copying stage1-chroot.sh to /tmp |
62 |
copying stage1-chroot.sh to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-20150122//tmp |
63 |
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-20150122//tmp |
64 |
Ensure the file has the executable bit set |
65 |
Running stage1-chroot.sh in chroot /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-20150122/ |
66 |
>>> Regenerating /etc/ld.so.cache... |
67 |
Adding USE=' build' to make.conf for portage build |
68 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
69 |
|
70 |
Performing Global Updates |
71 |
(Could take a couple of minutes if you have a lot of binary packages.) |
72 |
|
73 |
|
74 |
Updating seed stage... |
75 |
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc |
76 |
>>> Recording sys-devel/gcc in "world" favorites file... |
77 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
78 |
>>> Verifying ebuild manifests |
79 |
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/ |
80 |
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/ |
81 |
|
82 |
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/: |
83 |
|
84 |
* Initializing /tmp/stage1root/lib as a symlink |
85 |
* Initializing /tmp/stage1root/usr/lib as a symlink |
86 |
* Initializing /tmp/stage1root/usr/local/lib as a symlink |
87 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc |
88 |
>>> Verifying ebuild manifests |
89 |
>>> Running pre-merge checks for sys-devel/gcc-4.8.3 |
90 |
>>> Emerging (1 of 80) sys-libs/zlib-1.2.8-r1::gentoo for /tmp/stage1root/ |
91 |
>>> Installing (1 of 80) sys-libs/zlib-1.2.8-r1::gentoo to /tmp/stage1root/ |
92 |
>>> Emerging (2 of 80) sys-libs/ncurses-5.9-r3::gentoo for /tmp/stage1root/ |
93 |
>>> Failed to emerge sys-libs/ncurses-5.9-r3 for /tmp/stage1root/, Log file: |
94 |
>>> '/var/tmp/portage/sys-libs/ncurses-5.9-r3/temp/build.log' |
95 |
* Package: sys-libs/ncurses-5.9-r3 |
96 |
* Repository: gentoo |
97 |
* Maintainer: base-system@g.o |
98 |
* USE: abi_x86_64 amd64 build cxx elibc_glibc kernel_linux unicode userland_GNU |
99 |
* FEATURES: preserve-libs sandbox userpriv usersandbox |
100 |
* Applying ncurses-5.8-gfbsd.patch ... |
101 |
[ ok ] |
102 |
* Applying ncurses-5.7-nongnu.patch ... |
103 |
[ ok ] |
104 |
* Applying ncurses-5.9-rxvt-unicode-9.15.patch ... |
105 |
[ ok ] |
106 |
* Applying ncurses-5.9-fix-clang-build.patch ... |
107 |
[ ok ] |
108 |
* Applying ncurses-5.9-pkg-config.patch ... |
109 |
[ ok ] |
110 |
* abi_x86_64.amd64: running multilib-minimal_abi_src_configure |
111 |
checking for egrep... grep -E |
112 |
Configuring NCURSES 5.9 ABI 5 (Thu Jan 22 01:18:03 2015) |
113 |
checking build system type... x86_64-pc-linux-gnu |
114 |
checking host system type... x86_64-pc-linux-gnu |
115 |
checking target system type... x86_64-pc-linux-gnu |
116 |
Configuring for linux-gnu |
117 |
checking for prefix... /usr |
118 |
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc |
119 |
checking for C compiler default output... a.out |
120 |
checking whether the C compiler works... configure: error: cannot run C compiled programs. |
121 |
If you meant to cross compile, use `--host'. |
122 |
|
123 |
!!! Please attach the following file when seeking support: |
124 |
!!! /var/tmp/portage/sys-libs/ncurses-5.9-r3/work/ncurses-5.9-abi_x86_64.amd64-narrowc/config.log |
125 |
* ERROR: sys-libs/ncurses-5.9-r3::gentoo failed (configure phase): |
126 |
* econf failed |
127 |
* |
128 |
* Call stack: |
129 |
* ebuild.sh, line 93: Called src_configure |
130 |
* environment, line 2798: Called multilib-minimal_src_configure |
131 |
* environment, line 1958: Called multilib_foreach_abi 'multilib-minimal_abi_src_configure' |
132 |
* environment, line 2165: Called multibuild_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' |
133 |
* environment, line 1889: Called _multibuild_run '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' |
134 |
* environment, line 1887: Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_configure' |
135 |
* environment, line 405: Called multilib-minimal_abi_src_configure |
136 |
* environment, line 1952: Called multilib_src_configure |
137 |
* environment, line 2387: Called do_configure 'narrowc' |
138 |
* environment, line 611: Called econf '--with-terminfo-dirs=/etc/terminfo:/usr/share/terminfo' '--enable-pc-files' '--with-pkg-config=x86_64-pc-linux-gnu-pkg-config' 'PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig' '--with-shared' '--without-hashed-db' '--without-ada' '--with-cxx' '--with-cxx-binding' '--without-debug' '--without-profile' '--without-gpm' '--disable-termcap' '--enable-symlinks' '--with-rcs-ids' '--with-manpage-format=normal' '--enable-const' '--enable-colorfgbg' '--enable-echo' '--enable-warnings' '--without-assertions' '--disable-leaks' '--without-expanded' '--with-macros' '--without-trace' '--without-termlib' '--with-chtype=long' '--with-mmask-t=long' '--disable-ext-colors' '--disable-ext-mouse' '--without-pthread' '--without-reentrant' |
139 |
* phase-helpers.sh, line 584: Called die |
140 |
* The specific snippet of code: |
141 |
* die "econf failed" |
142 |
* |
143 |
* If you need support, post the output of `emerge --info '=sys-libs/ncurses-5.9-r3::gentoo'`, |
144 |
* the complete build log and the output of `emerge -pqv '=sys-libs/ncurses-5.9-r3::gentoo'`. |
145 |
* The complete build log is located at '/var/tmp/portage/sys-libs/ncurses-5.9-r3/temp/build.log'. |
146 |
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/ncurses-5.9-r3/temp/environment'. |
147 |
* Working directory: '/var/tmp/portage/sys-libs/ncurses-5.9-r3/work/ncurses-5.9-abi_x86_64.amd64-narrowc' |
148 |
* S: '/var/tmp/portage/sys-libs/ncurses-5.9-r3/work/ncurses-5.9' |
149 |
|
150 |
* Messages for package sys-libs/ncurses-5.9-r3 merged to /tmp/stage1root/: |
151 |
|
152 |
* ERROR: sys-libs/ncurses-5.9-r3::gentoo failed (configure phase): |
153 |
* econf failed |
154 |
* |
155 |
* Call stack: |
156 |
* ebuild.sh, line 93: Called src_configure |
157 |
* environment, line 2798: Called multilib-minimal_src_configure |
158 |
* environment, line 1958: Called multilib_foreach_abi 'multilib-minimal_abi_src_configure' |
159 |
* environment, line 2165: Called multibuild_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' |
160 |
* environment, line 1889: Called _multibuild_run '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure' |
161 |
* environment, line 1887: Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_configure' |
162 |
* environment, line 405: Called multilib-minimal_abi_src_configure |
163 |
* environment, line 1952: Called multilib_src_configure |
164 |
* environment, line 2387: Called do_configure 'narrowc' |
165 |
* environment, line 611: Called econf '--with-terminfo-dirs=/etc/terminfo:/usr/share/terminfo' '--enable-pc-files' '--with-pkg-config=x86_64-pc-linux-gnu-pkg-config' 'PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig' '--with-shared' '--without-hashed-db' '--without-ada' '--with-cxx' '--with-cxx-binding' '--without-debug' '--without-profile' '--without-gpm' '--disable-termcap' '--enable-symlinks' '--with-rcs-ids' '--with-manpage-format=normal' '--enable-const' '--enable-colorfgbg' '--enable-echo' '--enable-warnings' '--without-assertions' '--disable-leaks' '--without-expanded' '--with-macros' '--without-trace' '--without-termlib' '--with-chtype=long' '--with-mmask-t=long' '--disable-ext-colors' '--disable-ext-mouse' '--without-pthread' '--without-reentrant' |
166 |
* phase-helpers.sh, line 584: Called die |
167 |
* The specific snippet of code: |
168 |
* die "econf failed" |
169 |
* |
170 |
* If you need support, post the output of `emerge --info '=sys-libs/ncurses-5.9-r3::gentoo'`, |
171 |
* the complete build log and the output of `emerge -pqv '=sys-libs/ncurses-5.9-r3::gentoo'`. |
172 |
* The complete build log is located at '/var/tmp/portage/sys-libs/ncurses-5.9-r3/temp/build.log'. |
173 |
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/ncurses-5.9-r3/temp/environment'. |
174 |
* Working directory: '/var/tmp/portage/sys-libs/ncurses-5.9-r3/work/ncurses-5.9-abi_x86_64.amd64-narrowc' |
175 |
* S: '/var/tmp/portage/sys-libs/ncurses-5.9-r3/work/ncurses-5.9' |
176 |
|
177 |
!!! catalyst: run script failed. |
178 |
|
179 |
|
180 |
Traceback (most recent call last): |
181 |
File "modules/generic_stage_target.py", line 1244, in run_local |
182 |
"run script failed.",env=self.env) |
183 |
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd |
184 |
raise CatalystError,myexc |
185 |
CatalystError |
186 |
None |
187 |
|
188 |
!!! catalyst: Stage build aborting due to error. |
189 |
|
190 |
Traceback (most recent call last): |
191 |
File "/usr/lib64/catalyst/catalyst", line 218, in build_target |
192 |
mytarget.run() |
193 |
File "modules/generic_stage_target.py", line 1304, in run |
194 |
apply(getattr(self,x)) |
195 |
File "modules/generic_stage_target.py", line 1249, in run_local |
196 |
raise CatalystError,"Stage build aborting due to error." |
197 |
CatalystError |
198 |
!!! catalyst: Error encountered during run of target stage1 |
199 |
Catalyst aborting.... |
200 |
lockfile does not exist '/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-20150122/.catalyst_lock' |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /release/tmp/run/catalyst-auto.Wi8Tar/log/hardened_stage1.log |