1 |
Package cache support enabled. |
2 |
Seed cache support enabled. |
3 |
Snapshot cache support enabled. |
4 |
Envscript support enabled. |
5 |
Using target: stage3 |
6 |
Building natively for s390 |
7 |
Source path set to /var/tmp/catalyst/tmp/default/stage2-s390x-20160731/ |
8 |
If this is not desired, remove this directory or turn off |
9 |
seedcache in the options of catalyst.conf the source path |
10 |
will then be /var/tmp/catalyst/builds/default/stage2-s390x-20160731.tar.bz2 |
11 |
|
12 |
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20160731/ |
13 |
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage3-s390x-20160731/ |
14 |
Location of the package cache is /var/tmp/catalyst/packages/default/stage3-s390x-20160731/ |
15 |
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage3-s390x-20160731/ |
16 |
Checking for processes running in chroot and killing them. |
17 |
Removing AutoResume Points: ... |
18 |
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage3-s390x-20160731/ |
19 |
>>> Waiting 10 seconds before starting... |
20 |
>>> (Control-C to abort)... |
21 |
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1 |
22 |
clearing autoresume ... |
23 |
Removing AutoResume Points: ... |
24 |
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage3-s390x-20160731/ |
25 |
clearing chroot ... |
26 |
Emptying directory /var/tmp/catalyst/tmp/default/stage3-s390x-20160731/ |
27 |
clearing package cache ... |
28 |
purging the pkgcache ... |
29 |
clearing kerncache ... |
30 |
purging the kerncache ... |
31 |
--- Running action sequence: unpack |
32 |
|
33 |
Starting rsync from /var/tmp/catalyst/tmp/default/stage2-s390x-20160731/ |
34 |
to /var/tmp/catalyst/tmp/default/stage3-s390x-20160731/ (This may take some time) ... |
35 |
|
36 |
--- Running action sequence: unpack_snapshot |
37 |
Valid snapshot cache, skipping unpack of portage tree... |
38 |
--- Running action sequence: setup_confdir |
39 |
Configuring /etc/portage... |
40 |
--- Running action sequence: portage_overlay |
41 |
--- Running action sequence: base_dirs |
42 |
--- Running action sequence: bind |
43 |
--- Running action sequence: chroot_setup |
44 |
Setting up chroot... |
45 |
|
46 |
Warning!!!! |
47 |
Overriding certain env variables may cause catastrophic failure. |
48 |
If your build fails look here first as the possible problem. |
49 |
Catalyst assumes you know what you are doing when setting |
50 |
these variables. |
51 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
52 |
You have been warned |
53 |
|
54 |
--- Running action sequence: setup_environment |
55 |
--- Running action sequence: run_local |
56 |
Copying stage3-chroot.sh to /tmp |
57 |
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-s390x-20160731//tmp |
58 |
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-s390x-20160731//tmp |
59 |
Ensure the file has the executable bit set |
60 |
Running stage3-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage3-s390x-20160731/ |
61 |
>>> Regenerating /etc/ld.so.cache... |
62 |
Updating portage with USE='' |
63 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage |
64 |
* Last emerge --sync was 37d 7h 19m 12s ago. |
65 |
>>> Verifying ebuild manifests |
66 |
>>> Emerging (1 of 15) sys-libs/gdbm-1.11::gentoo |
67 |
>>> Installing (1 of 15) sys-libs/gdbm-1.11::gentoo |
68 |
>>> Emerging (2 of 15) app-misc/mime-types-9::gentoo |
69 |
>>> Installing (2 of 15) app-misc/mime-types-9::gentoo |
70 |
>>> Emerging (3 of 15) app-misc/c_rehash-1.7-r1::gentoo |
71 |
>>> Installing (3 of 15) app-misc/c_rehash-1.7-r1::gentoo |
72 |
>>> Emerging (4 of 15) sys-apps/install-xattr-0.5::gentoo |
73 |
>>> Installing (4 of 15) sys-apps/install-xattr-0.5::gentoo |
74 |
>>> Emerging (5 of 15) sys-apps/debianutils-4.4::gentoo |
75 |
>>> Installing (5 of 15) sys-apps/debianutils-4.4::gentoo |
76 |
>>> Emerging (6 of 15) sys-apps/attr-2.4.47-r2::gentoo |
77 |
>>> Installing (6 of 15) sys-apps/attr-2.4.47-r2::gentoo |
78 |
>>> Emerging (7 of 15) dev-libs/openssl-1.0.2h::gentoo |
79 |
>>> Installing (7 of 15) dev-libs/openssl-1.0.2h::gentoo |
80 |
>>> Emerging (8 of 15) app-misc/ca-certificates-20151214.3.21::gentoo |
81 |
>>> Installing (8 of 15) app-misc/ca-certificates-20151214.3.21::gentoo |
82 |
>>> Emerging (9 of 15) dev-lang/python-3.4.3-r1::gentoo |
83 |
>>> Installing (9 of 15) dev-lang/python-3.4.3-r1::gentoo |
84 |
>>> Emerging (10 of 15) dev-lang/python-2.7.10-r1::gentoo |
85 |
>>> Installing (10 of 15) dev-lang/python-2.7.10-r1::gentoo |
86 |
>>> Emerging (11 of 15) dev-python/packaging-15.3-r2::gentoo |
87 |
>>> Installing (11 of 15) dev-python/packaging-15.3-r2::gentoo |
88 |
>>> Emerging (12 of 15) dev-python/setuptools-18.4::gentoo |
89 |
>>> Installing (12 of 15) dev-python/setuptools-18.4::gentoo |
90 |
>>> Emerging (13 of 15) dev-python/certifi-2015.11.20::gentoo |
91 |
>>> Installing (13 of 15) dev-python/certifi-2015.11.20::gentoo |
92 |
>>> Emerging (14 of 15) dev-python/pyxattr-0.5.3::gentoo |
93 |
>>> Installing (14 of 15) dev-python/pyxattr-0.5.3::gentoo |
94 |
>>> Emerging (15 of 15) sys-apps/portage-2.2.26::gentoo |
95 |
>>> Installing (15 of 15) sys-apps/portage-2.2.26::gentoo |
96 |
* Messages for package app-misc/ca-certificates-20151214.3.21: |
97 |
* You should run update-ca-certificates manually after etc-update |
98 |
* Messages for package dev-python/packaging-15.3-r2: |
99 |
* Could not find a UTF-8 locale. This may trigger build failures in |
100 |
* some python packages. Please ensure that a UTF-8 locale is listed in |
101 |
* /etc/locale.gen and run locale-gen. |
102 |
* Messages for package dev-python/setuptools-18.4: |
103 |
* Could not find a UTF-8 locale. This may trigger build failures in |
104 |
* some python packages. Please ensure that a UTF-8 locale is listed in |
105 |
* /etc/locale.gen and run locale-gen. |
106 |
* Messages for package dev-python/certifi-2015.11.20: |
107 |
* Could not find a UTF-8 locale. This may trigger build failures in |
108 |
* some python packages. Please ensure that a UTF-8 locale is listed in |
109 |
* /etc/locale.gen and run locale-gen. |
110 |
* Messages for package dev-python/pyxattr-0.5.3: |
111 |
* Could not find a UTF-8 locale. This may trigger build failures in |
112 |
* some python packages. Please ensure that a UTF-8 locale is listed in |
113 |
* /etc/locale.gen and run locale-gen. |
114 |
* Messages for package sys-apps/portage-2.2.26: |
115 |
* Could not find a UTF-8 locale. This may trigger build failures in |
116 |
* some python packages. Please ensure that a UTF-8 locale is listed in |
117 |
* /etc/locale.gen and run locale-gen. |
118 |
|
119 |
|
120 |
|
121 |
|
122 |
|
123 |
|
124 |
|
125 |
|
126 |
|
127 |
|
128 |
|
129 |
|
130 |
emerge --quiet --usepkg --buildpkg --newuse -e @system |
131 |
* Last emerge --sync was 37d 7h 42m 33s ago. |
132 |
>>> Verifying ebuild manifests |
133 |
>>> Running pre-merge checks for sys-devel/gcc-4.9.3 |
134 |
>>> Running pre-merge checks for sys-libs/pam-1.2.1 |
135 |
>>> Emerging (1 of 183) app-arch/xz-utils-5.2.2::gentoo |
136 |
>>> Installing (1 of 183) app-arch/xz-utils-5.2.2::gentoo |
137 |
>>> Emerging (2 of 183) virtual/libintl-0-r2::gentoo |
138 |
>>> Installing (2 of 183) virtual/libintl-0-r2::gentoo |
139 |
>>> Emerging (3 of 183) sys-libs/zlib-1.2.8-r1::gentoo |
140 |
>>> Installing (3 of 183) sys-libs/zlib-1.2.8-r1::gentoo |
141 |
>>> Emerging (4 of 183) sys-libs/ncurses-5.9-r5::gentoo |
142 |
>>> Installing (4 of 183) sys-libs/ncurses-5.9-r5::gentoo |
143 |
>>> Emerging binary (5 of 183) sys-apps/attr-2.4.47-r2::gentoo |
144 |
>>> Installing (5 of 183) sys-apps/attr-2.4.47-r2::gentoo |
145 |
>>> Emerging (6 of 183) sys-devel/gnuconfig-20151214::gentoo |
146 |
>>> Installing (6 of 183) sys-devel/gnuconfig-20151214::gentoo |
147 |
>>> Emerging (7 of 183) app-arch/bzip2-1.0.6-r6::gentoo |
148 |
>>> Installing (7 of 183) app-arch/bzip2-1.0.6-r6::gentoo |
149 |
>>> Emerging (8 of 183) virtual/libiconv-0-r2::gentoo |
150 |
>>> Installing (8 of 183) virtual/libiconv-0-r2::gentoo |
151 |
>>> Emerging (9 of 183) dev-libs/expat-2.1.0-r5::gentoo |
152 |
>>> Installing (9 of 183) dev-libs/expat-2.1.0-r5::gentoo |
153 |
>>> Emerging binary (10 of 183) sys-libs/gdbm-1.11::gentoo |
154 |
>>> Installing (10 of 183) sys-libs/gdbm-1.11::gentoo |
155 |
>>> Emerging (11 of 183) sys-apps/gentoo-functions-0.10::gentoo |
156 |
>>> Installing (11 of 183) sys-apps/gentoo-functions-0.10::gentoo |
157 |
>>> Emerging binary (12 of 183) app-misc/c_rehash-1.7-r1::gentoo |
158 |
>>> Installing (12 of 183) app-misc/c_rehash-1.7-r1::gentoo |
159 |
>>> Emerging (13 of 183) dev-lang/python-exec-2.0.1-r1::gentoo |
160 |
>>> Installing (13 of 183) dev-lang/python-exec-2.0.1-r1::gentoo |
161 |
>>> Emerging binary (14 of 183) app-misc/mime-types-9::gentoo |
162 |
>>> Installing (14 of 183) app-misc/mime-types-9::gentoo |
163 |
>>> Emerging binary (15 of 183) sys-apps/debianutils-4.4::gentoo |
164 |
>>> Installing (15 of 183) sys-apps/debianutils-4.4::gentoo |
165 |
>>> Emerging (16 of 183) sys-devel/gcc-config-1.7.3::gentoo |
166 |
>>> Installing (16 of 183) sys-devel/gcc-config-1.7.3::gentoo |
167 |
>>> Emerging (17 of 183) app-misc/editor-wrapper-4::gentoo |
168 |
>>> Installing (17 of 183) app-misc/editor-wrapper-4::gentoo |
169 |
>>> Emerging (18 of 183) dev-libs/libffi-3.0.13-r1::gentoo |
170 |
>>> Installing (18 of 183) dev-libs/libffi-3.0.13-r1::gentoo |
171 |
>>> Emerging (19 of 183) app-text/manpager-1::gentoo |
172 |
>>> Installing (19 of 183) app-text/manpager-1::gentoo |
173 |
|
174 |
!!! catalyst: run script failed. |
175 |
|
176 |
|
177 |
Traceback (most recent call last): |
178 |
File "modules/generic_stage_target.py", line 1244, in run_local |
179 |
"run script failed.",env=self.env) |
180 |
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 541, in cmd |
181 |
raise CatalystError,myexc |
182 |
CatalystError |
183 |
None |
184 |
|
185 |
!!! catalyst: Stage build aborting due to error. |
186 |
|
187 |
Traceback (most recent call last): |
188 |
File "/usr/lib64/catalyst/catalyst", line 218, in build_target |
189 |
mytarget.run() |
190 |
File "modules/generic_stage_target.py", line 1304, in run |
191 |
apply(getattr(self,x)) |
192 |
File "modules/generic_stage_target.py", line 1249, in run_local |
193 |
raise CatalystError,"Stage build aborting due to error." |
194 |
CatalystError |
195 |
!!! catalyst: Error encountered during run of target stage3 |
196 |
Catalyst aborting.... |
197 |
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage3-s390x-20160731/.catalyst_lock' |
198 |
Command exited with non-zero status 1 |
199 |
1638.51user 513.43system 33:11.73elapsed 108%CPU (0avgtext+0avgdata 1471232maxresident)k |
200 |
0inputs+0outputs (26major+132411592minor)pagefaults 0swaps |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /tmp/catalyst-auto.20160731.RIsBYA/log/stage3.log |