| 1 |
This may not be a total solution or fix, but it seems you are using a syntax for route that is somewhat dated. I would try routes_eth0="213.251.152.1" in place of your gateway line and see if that helps at all. |
| 2 |
|
| 3 |
Ted |
| 4 |
|
| 5 |
-----Original Message----- |
| 6 |
From: David CHANIAL [mailto:david.ml@××××××××.fr] |
| 7 |
Sent: Monday, July 17, 2006 12:59 PM |
| 8 |
To: gentoo-server@l.g.o |
| 9 |
Subject: [gentoo-server] vlans vconfig and 802.1q configuration under gentoo |
| 10 |
|
| 11 |
Hi alls, |
| 12 |
I hope someone has help for me and this case. |
| 13 |
|
| 14 |
I successfully and simply use dot1q vlans with linux, but when i want to gear them from /etc/conf.d/net, it fail. |
| 15 |
|
| 16 |
Actually i use the next /etc/conf.d/net: |
| 17 |
http://www.rafb.net/paste/results/1WIOf642.html |
| 18 |
|
| 19 |
And i manually launch : |
| 20 |
http://www.rafb.net/paste/results/0FcwCt46.html |
| 21 |
|
| 22 |
So in the actual case, i have : |
| 23 |
- eth1/192.168.240.1 flow which is untagged (native vlan at other side is 311) |
| 24 |
- vlan312/10.240.31.1 flow which use eth1, as tagged |
| 25 |
|
| 26 |
*** |
| 27 |
I would have a gentoo network config which provide me a full vlan support : |
| 28 |
|
| 29 |
- vlan311/192.168.240.1 flow which use eth1 as tagged |
| 30 |
- vlan312/10.240.31.1 flow which use eth1, as tagged |
| 31 |
|
| 32 |
Best regards, |
| 33 |
-- |
| 34 |
David CHANIAL - Euro Web SARL - http://www.euro-web.fr |
| 35 |
Location de serveurs dédiés infogérés |
| 36 |
Infogérance et consulting |
| 37 |
Hébergement mutualisé sur mesure |
| 38 |
Serveurs de jeux |
| 39 |
|
| 40 |
-- |
| 41 |
gentoo-server@g.o mailing list |
| 42 |
|
| 43 |
|
| 44 |
-- |
| 45 |
gentoo-server@g.o mailing list |
Archives