Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-sparc
Navigation:
Lists: gentoo-sparc: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: gentoo-sparc@g.o
From: 张韡武 <zhangweiwu@...>
Subject: Re: alsa sound do not work on Ultrasparc 5
Date: Tue, 19 Dec 2006 22:44:14 +0800
在 2006-12-19二的 09:40 -0500,Will Simoneau写道:

> Your kernel dumped stack and part of it is showing in your dmesg
> fragment... please post the rest of that info, because it very likely
> will help in figuring out what's wrong.

Thank you for prompted me. Here is the full dmesg

[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 3.15.2 1998/11/10 10:35'
[    0.000000] PROMLIB: Root node compatible: 
[    0.000000] Linux version 2.6.18-gentoo-r3 (root@...) (gcc version 3.4.5 (Gentoo Linux 3.4.5)) #11 Sun Dec 17 07:14:29 HKT 2006
[    0.000000] ARCH: SUN4U
[    0.000000] Ethernet address: 08:00:20:b0:99:30
[    0.000000] PROM: Built device tree with 48679 bytes of memory.
[    0.000000] On node 0 totalpages: 32142
[    0.000000]   DMA zone: 32142 pages, LIFO batch:7
[    0.000000] CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(2097152):line_sz(64)]
[    0.000000] Built 1 zonelists.  Total pages: 32142
[    0.000000] Kernel command line: root=/dev/sda2
[    0.000000] PID hash table entries: 1024 (order: 10, 8192 bytes)
[    0.134261] Console: colour dummy device 80x25
[    0.135966] Dentry cache hash table entries: 32768 (order: 5, 262144 bytes)
[    0.137504] Inode-cache hash table entries: 16384 (order: 4, 131072 bytes)
[    0.151648] Memory: 254560k available (2560k kernel code, 976k data, 120k init) [fffff80000000000,0000000017f46000]
[    0.229714] Calibrating delay using timer specific routine.. 666.35 BogoMIPS (lpj=1332718)
[    0.230158] Mount-cache hash table entries: 512
[    0.233508] NET: Registered protocol family 16
[    0.244766] PCI: Probing for controllers.
[    0.248370] /pci@1f,0/pci@1,1: SABRE PCI Bus Module
[    0.248416] /pci@1f,0/pci@1: SABRE PCI Bus Module
[    0.253380] PCI0(PBMA): Bus running at 33MHz
[    0.253608] PCI0(PBMB): Bus running at 33MHz
[    0.253776] ebus0: [auxio] [power] [SUNW,pll] [se] [su] [su] [ecpp] [fdthree] [eeprom] [flashprom] [SUNW,CS4231]
[    0.257231] power: Control reg at 1fff1724000 ... powerd running.
[    0.258991] SCSI subsystem initialized
[    0.259324] usbcore: registered new driver usbfs
[    0.259588] usbcore: registered new driver hub
[    0.260568] AUXIO: Found device at /pci@1f,0/pci@1,1/ebus@1/auxio@14,726000
[    0.260891] /pci@1f,0/pci@1,1/ebus@1/eeprom@14,0: Clock regs at 000001fff1000000
[    0.262936] NET: Registered protocol family 2
[    0.298023] IP route cache hash table entries: 2048 (order: 1, 16384 bytes)
[    0.298790] TCP established hash table entries: 8192 (order: 3, 65536 bytes)
[    0.299211] TCP bind hash table entries: 4096 (order: 2, 32768 bytes)
[    0.299448] TCP: Hash tables configured (established 8192 bind 4096)
[    0.299488] TCP reno registered
[    0.307212] Total HugeTLB memory allocated, 0
[    0.309055] Initializing Cryptographic API
[    0.309118] io scheduler noop registered
[    0.309181] io scheduler anticipatory registered (default)
[    0.309252] io scheduler deadline registered
[    0.309376] io scheduler cfq registered
[    2.763446] Console: switching to mono PROM 80x34
[    5.222193] lp: driver loaded but no devices found
[    5.269419] rtc_init: no PC rtc found
[    5.309221] /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 6
[    5.401245] /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 7
[    5.490780] parport0: PC-style at 0x1fff13043bc (0x1fff13047bc), irq 8, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[    5.741625] parport0: Printer, Hewlett-Packard hp LaserJet 3015
[    5.908842] lp0: using parport0 (interrupt-driven).
[    6.045027] mice: PS/2 mouse device common for all mice
[    6.183845] sunhme.c:v3.00 June 23, 2006 David S. Miller (davem@...)
[    6.446394] eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:b0:99:30 
[    6.796018] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    6.941406] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    7.208813] CMD646: IDE controller at PCI slot 0000:01:03.0
[    7.348860] CMD646: chipset revision 3
[    7.476287] CMD646: chipset revision 0x03, MultiWord DMA Force Limited
[    7.635645] CMD646: 100% native mode on irq 14
[    7.767906]     ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio, hdb:pio
[    8.051049]     ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio, hdd:pio
[    8.334190] Probing IDE interface ide0...
[    8.343815] input: Sun Type 127 keyboard as /class/input/input0
[    8.487042] input: Sun Mouse as /class/input/input1
[    8.845673] hda: QUANTUM FIREBALL1280A, ATA DISK drive
[    9.665802] ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 14
[    9.814283] Probing IDE interface ide1...
[   10.213624] hdc: CRD-8322B, ATAPI CD/DVD-ROM drive
[   11.053513] ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 14 (shared with ide0)
[   11.337021] hda: max request size: 128KiB
[   11.466281] hda: 2503872 sectors (1281 MB) w/83KiB Cache, CHS=2484/16/63, DMA
[   11.665455]  hda: hda1 hda2 hda3
[   11.838217] hdc: ATAPI 32X CD-ROM drive, 128kB Cache
[   12.022040] Uniform CD-ROM driver Revision: 3.20
[   12.159289] libata version 2.00 loaded.
[   12.159525] sata_via 0000:02:02.0: version 2.0
[   12.159561] PCI: VIA IRQ fixup for 0000:02:02.0, from 18 to 2
[   12.300799] sata_via 0000:02:02.0: routed to hard irq line 2
[   12.441801] ata1: SATA max UDMA/133 cmd 0x1FE02000400 ctl 0x1FE0200040A bmdma 0x1FE02000440 irq 18
[   12.715904] ata2: SATA max UDMA/133 cmd 0x1FE02000410 ctl 0x1FE0200041A bmdma 0x1FE02000448 irq 18
[   12.989620] scsi0 : sata_via
[   13.421412] ata1: SATA link down (SStatus 0 SControl 310)
[   13.570951] ATA: abnormal status 0x7F on port 0x1FE02000407
[   13.710928] scsi1 : sata_via
[   14.297407] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   14.442543] ata2.00: ATA-7, max UDMA/133, 625140335 sectors: LBA48 NCQ (depth 0/32)
[   14.708379] ata2.00: configured for UDMA/133
[   14.839752]   Vendor: ATA       Model: ST3320620AS       Rev: 3.AA
[   15.335720]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   15.611638] SCSI device sda: 625140335 512-byte hdwr sectors (320072 MB)
[   15.759459] sda: Write Protect is off
[   15.886427] sda: Mode Sense: 00 3a 00 00
[   15.886577] SCSI device sda: drive cache: write back
[   16.022795] SCSI device sda: 625140335 512-byte hdwr sectors (320072 MB)
[   16.170584] sda: Write Protect is off
[   16.297434] sda: Mode Sense: 00 3a 00 00
[   16.297580] SCSI device sda: drive cache: write back
[   16.433475]  sda: sda1 sda2 sda3
[   16.615811] sd 1:0:0:0: Attached scsi disk sda
[   16.748404] rtc_sun_init: Registered Mostek RTC driver.
[   16.886232] ehci_hcd 0000:02:01.2: EHCI Host Controller
[   17.024179] ehci_hcd 0000:02:01.2: new USB bus registered, assigned bus number 1
[   17.309330] ehci_hcd 0000:02:01.2: irq 17, io mem 0x1ff00006000
[   17.451556] ehci_hcd 0000:02:01.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
[   17.715313] usb usb1: configuration #1 chosen from 1 choice
[   17.855609] hub 1-0:1.0: USB hub found
[   17.983082] hub 1-0:1.0: 5 ports detected
[   18.213877] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[   18.214144] ohci_hcd 0000:02:01.0: OHCI Host Controller
[   18.352069] ohci_hcd 0000:02:01.0: new USB bus registered, assigned bus number 2
[   18.614743] ohci_hcd 0000:02:01.0: irq 15, io mem 0x1ff00002000
[   19.316296] usb usb2: configuration #1 chosen from 1 choice
[   19.456816] hub 2-0:1.0: USB hub found
[   19.584239] hub 2-0:1.0: 3 ports detected
[   19.921252] usb 1-2: new high speed USB device using ehci_hcd and address 3
[   20.203672] usb 1-2: configuration #1 chosen from 1 choice
[   20.363091] ohci_hcd 0000:02:01.1: OHCI Host Controller
[   20.521580] ohci_hcd 0000:02:01.1: new USB bus registered, assigned bus number 3
[   20.815596] ohci_hcd 0000:02:01.1: irq 16, io mem 0x1ff00004000
[   21.524234] usb usb3: configuration #1 chosen from 1 choice
[   21.664614] hub 3-0:1.0: USB hub found
[   21.792248] hub 3-0:1.0: 2 ports detected
[   22.233193] usb 2-1: new full speed USB device using ohci_hcd and address 2
[   22.549143] usb 2-1: configuration #1 chosen from 1 choice
[   22.819194] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x081E
[   23.149740] drivers/usb/class/usblp.c: usblp1: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1617
[   23.436372] usbcore: registered new driver usblp
[   23.569857] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[   23.729389] Initializing USB Mass Storage driver...
[   24.269144] usb 2-3: new low speed USB device using ohci_hcd and address 3
[   24.586761] usb 2-3: configuration #1 chosen from 1 choice
[   24.734770] scsi2 : SCSI emulation for USB Mass Storage devices
[   24.877684] usbcore: registered new driver usb-storage
[   25.014713] USB Mass Storage support registered.
[   25.148344] usb-storage: device found at 3
[   25.148363] usb-storage: waiting for device to settle before scanning
[   25.148555] usbcore: registered new driver hiddev
[   25.291021] input: CHESEN PS2 to USB Converter as /class/input/input2
[   25.437207] input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:02:01.0-3
[   25.833686] input: CHESEN PS2 to USB Converter as /class/input/input3
[   25.980221] input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:02:01.0-3
[   26.272963] usbcore: registered new driver usbhid
[   26.407084] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   26.551490] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[   26.986597] ALSA device list:
[   27.108836]   #0: Sun CS4231 at 0x1fff1200000, irq 10
[   27.245683] TCP bic registered
[   27.368525] NET: Registered protocol family 1
[   27.500112] NET: Registered protocol family 17
[   27.639634] EXT3-fs: INFO: recovery required on readonly filesystem.
[   27.785050] EXT3-fs: write access will be enabled during recovery.
[   27.954723] kjournald starting.  Commit interval 5 seconds
[   28.094210] EXT3-fs: recovery complete.
[   28.222854] EXT3-fs: mounted filesystem with ordered data mode.
[   28.365479] VFS: Mounted root (ext3 filesystem) readonly.
[   30.146288]   Vendor: EPSON     Model: Stylus Storage    Rev: 1.00
[   30.646137]   Type:   Direct-Access                      ANSI SCSI revision: 02
[   30.927111] sd 2:0:0:0: Attached scsi removable disk sdb
[   31.088639] usb-storage: device scan complete
[   31.603865] Adding 594352k swap on /dev/sda1.  Priority:-1 extents:1 across:594352k
[   32.665534] EXT3 FS on sda2, internal journal
[   54.055095] kjournald starting.  Commit interval 5 seconds
[   54.056064] EXT3 FS on sda3, internal journal
[   54.056094] EXT3-fs: mounted filesystem with ordered data mode.
[   69.819619] lp0: ECP mode
[   70.268832] lp0: ECP mode
[   70.303791] lp0: ECP mode
[   72.020026] eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.
[   73.783620] Unable to load NLS charset utf-8
[   73.783647] smbfs: failed to load nls 'utf-8'
[ 1105.664443] lp0: ECP mode
[ 1105.958804] lp0: ECP mode
[ 1105.991826] lp0: ECP mode
[ 4970.226814] SMB connection re-established (-5)
[ 5250.224599] Unable to handle kernel paging request at virtual address 0000000100038000
[ 5250.224635] tsk->{mm,active_mm}->context = 0000000000001f7c
[ 5250.224659] tsk->{mm,active_mm}->pgd = fffff800155a2000
[ 5250.224682]               \|/ ____ \|/
[ 5250.224693]               "@'/ .. \`@"
[ 5250.224704]               /_| \__/ |_\
[ 5250.224714]                  \__U_/
[ 5250.224737] madplay(20175): Oops [#1]
[ 5250.224765] TSTATE: 0000000080009600 TPC: 0000000000543cd0 TNPC: 0000000000543cd4 Y: 00000000    Not tainted
[ 5250.224814] TPC: <memcpy+0x218/0x13c0>
[ 5250.224836] g0: 0000000000612fe4 g1: 0000000100039078 g2: 0000000000000000 g3: 0000000000000038
[ 5250.224873] g4: fffff80010430da0 g5: 0000000000000000 g6: fffff80005638000 g7: 0000000000001080
[ 5250.224909] o0: fffff800002b6700 o1: 0000000100038000 o2: 0000000000000008 o3: 0000000000543c40
[ 5250.224946] o4: fffff800002b6080 o5: 0000000000000000 sp: fffff8000563aaf1 ret_pc: 0000000000545928
[ 5250.224978] RPC: <memcpy_user_stub+0x14/0x24>
[ 5250.225004] l0: 0000000000000001 l1: fffff80017ad0420 l2: 0000000000000000 l3: 00000000006ff400
[ 5250.225041] l4: fffff80017ad0420 l5: 00000000000019b7 l6: 00000000007b7728 l7: fffff80010430fa0
[ 5250.225077] i0: fffff800002b6080 i1: 00000001000378c0 i2: 00000000000017c0 i3: 000000000027e48e
[ 5250.225114] i4: 00000000000005f0 i5: fffff800156a2c00 i6: fffff8000563abb1 i7: 0000000000613078
[ 5250.225152] I7: <snd_pcm_lib_write_transfer+0x9c/0xc8>
[ 5250.225172] Caller[0000000000613078]: snd_pcm_lib_write_transfer+0x9c/0xc8
[ 5250.225204] Caller[00000000006133a4]: snd_pcm_lib_write1+0x300/0x43c
[ 5250.225235] Caller[0000000010026750]: snd_pcm_oss_sync+0x170/0x27c [snd_pcm_oss]
[ 5250.225307] Caller[00000000100271e4]: snd_pcm_oss_release+0x24/0x9c [snd_pcm_oss]
[ 5250.225356] Caller[00000000004869f8]: __fput+0xb8/0x178
[ 5250.225394] Caller[0000000000485670]: filp_close+0x70/0x7c
[ 5250.225424] Caller[0000000000446a0c]: put_files_struct+0xa8/0xf0
[ 5250.225461] Caller[00000000004471fc]: do_exit+0x200/0x844
[ 5250.225490] Caller[0000000000447900]: do_group_exit+0x88/0x8c
[ 5250.225519] Caller[0000000000450ca0]: get_signal_to_deliver+0x320/0x334
[ 5250.225567] Caller[0000000000433f24]: do_signal32+0x40/0xe00
[ 5250.225603] Caller[00000000004207f8]: do_notify_resume+0x4c/0x574
[ 5250.225646] Caller[00000000004053dc]: __handle_signal+0x18/0x34
[ 5250.225683] Caller[00000000f7db3070]: 0xf7db3078
[ 5250.225707] Instruction DUMP: b7b2c90d  bbb3490f  bfb3c900 <c39a5e00> e3ba1e00  92026040  8ea1e040  02600032  90022040 
[ 5250.225774] Fixing recursive fault but reboot is needed!
[68491.048413] eth0: Happy Meal out of receive descriptors, packet dropped.
[68511.586097] eth0: Happy Meal out of receive descriptors, packet dropped.
[69308.765671] usb 1-2: USB disconnect, address 3
[69308.771124] drivers/usb/class/usblp.c: usblp0: removed
[69326.897173] usb 1-2: new high speed USB device using ehci_hcd and address 6
[69327.031978] usb 1-2: configuration #1 chosen from 1 choice
[69327.032954] scsi3 : SCSI emulation for USB Mass Storage devices
[69327.033492] usb-storage: device found at 6
[69327.033510] usb-storage: waiting for device to settle before scanning
[69327.035609] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04B8 pid 0x081E
[69332.035228]   Vendor: EPSON     Model: Stylus Storage    Rev: 1.00
[69332.035300]   Type:   Direct-Access                      ANSI SCSI revision: 02
[69332.040422] sd 3:0:0:0: Attached scsi removable disk sdb
[69332.042608] usb-storage: device scan complete
[69594.022714] usb 1-2: USB disconnect, address 6
[69594.893131] drivers/usb/class/usblp.c: usblp0: removed
[69705.183927] usb 1-2: new high speed USB device using ehci_hcd and address 7
[69705.318570] usb 1-2: configuration #1 chosen from 1 choice
[69705.319513] scsi4 : SCSI emulation for USB Mass Storage devices
[69705.320052] usb-storage: device found at 7
[69705.320072] usb-storage: waiting for device to settle before scanning
[69705.322301] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x04B8 pid 0x081E
[69710.321844]   Vendor: EPSON     Model: Stylus Storage    Rev: 1.00
[69710.321989]   Type:   Direct-Access                      ANSI SCSI revision: 02
[69710.327006] sd 4:0:0:0: Attached scsi removable disk sdb
[69710.329115] usb-storage: device scan complete
[70193.264110] usb 1-2: USB disconnect, address 7
[70194.055131] drivers/usb/class/usblp.c: usblp0: removed
[70696.987743] usb 1-2: new high speed USB device using ehci_hcd and address 8
[70697.129249] usb 1-2: configuration #1 chosen from 1 choice
[70697.130294] scsi5 : SCSI emulation for USB Mass Storage devices
[70697.130813] usb-storage: device found at 8
[70697.130832] usb-storage: waiting for device to settle before scanning
[70697.133038] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x04B8 pid 0x081E
[70702.130040]   Vendor: EPSON     Model: Stylus Storage    Rev: 1.00
[70702.130110]   Type:   Direct-Access                      ANSI SCSI revision: 02
[70702.135597] sd 5:0:0:0: Attached scsi removable disk sdb
[70702.137503] usb-storage: device scan complete

Attachment:
signature.asc ( 这是信件的数 字签名部分)
Replies:
Re: alsa sound do not work on Ultrasparc 5
-- Will Simoneau
References:
alsa sound do not work on Ultrasparc 5
-- 张韡武
Re: alsa sound do not work on Ultrasparc 5
-- Will Simoneau
Navigation:
Lists: gentoo-sparc: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
Re: alsa sound do not work on Ultrasparc 5
Next by thread:
Re: alsa sound do not work on Ultrasparc 5
Previous by date:
Re: alsa sound do not work on Ultrasparc 5
Next by date:
Re: alsa sound do not work on Ultrasparc 5


Updated Jun 17, 2009

Summary: Archive of the gentoo-sparc mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.