List Archive: gentoo-sparc
Note: Due to technical difficulties, the Archives are currently not up to date.
provides an alternative service for most mailing lists.c.f. bug 424647
在 2006-12-16六的 17:48 +0100，Fabian Hänsel写道：
> Hi 张韡武,
> maybe your kernel just uses other names than the previous one? Do
> $ cat /proc/partitions
sappho ~ # cat /proc/partitions
major minor #blocks name
8 0 312570167 sda
8 1 594373 sda1
8 2 4811467 sda2
8 3 307162800 sda3
> Maybe it lists the SATA drive as /dev/sda instead of hda before (sata
> driver infrastructure in kernel evolved).
Ah, I am sorry I didn't explain this clear enough: I have a 320GB disk
as my main harddisk and a 5GB small harddisk as booting disk.
I. The booting disk is 5GB IDE disk, directly connected to the
on-board IDE controller, have sun disk label, should
be /dev/hda, /dev/hda1 should be mounted on '/boot';
II. The main disk is 320G SATA disk, connected to the PCI SATA RAID
card which in turn connect on the PCI slot of motherboard. this
disk have MSDOS label, have MSDOS partition and is recognised
as /dev/sda. /dev/sda2 is mounted as '/';
Current problem is the system boots but do not seems to
> Another guess: did you compile your kernel with sun partition table
> layout support?
Yes I am sure the sun partition table layout support is enabled.
Real SoftService http://www.realss.com
销售咨询(Sales Department): 0086 592 20 99987 (Chinese, German,
国际业务(International Sales): 0086 10 8460 6011 (German and English)