List Archive: gentoo-sparc
Note: Due to technical difficulties, the Archives are currently not up to date.
provides an alternative service for most mailing lists.c.f. bug 424647
To install the 2007.0 cd you have two kernels. You selected 2.6.20 when in fact you should do [TAB] and select the 2.6.17
> Date: Tue, 18 Mar 2008 08:21:05 -0700
> From: bm_witness@...
> Subject: Re: [gentoo-sparc] QLA2xxx
> To: email@example.com
> I started trying to work on the system; however, we ran into a few
> problems with it. I haven't been able to get the 2007.0 CD working
> because of the aforementioned issue - it also doesn't list an obppath,
> loading, or data files for the QLA controller under /sys/devices - so
> following the instructions previously provided is impossible. :-<
> I have located the device:
> uDev is on the 2007.0 CD, and loads the module, but has problems.
> Here's the dmesg output from the 2007.0 CD using the 2.6.20 kernel:
> I also managed to find the CD I used on another system - a 2006.1 CD.
> It boots and detects the QLA controller just fine - but uses the older
> method where the firmware is built into the kernel. However, it is
> unable to spin up the hard drive for some reason - it does detect it.
> Here's the dmesg output from the 2006.1 CD using the 2.6.17 kernel:
> Any tips? Is the hard drive bad? I'm not sure where to go from here,
> and I need to get this at least with the basic OS on it before the
> firstname.lastname@example.org mailing list
Express yourself instantly with MSN Messenger! Download today it's FREE!
email@example.com mailing list