Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-user-cs
Navigation:
Lists: gentoo-user-cs: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: gentoo-user-cs@g.o
From: Petr Koval <nuxnet@...>
Subject: Re: Siemens GPRS cez USB kabel
Date: Sat, 17 Sep 2005 20:33:30 +0200
Am Donnerstag 21 Juli 2005 14:29 schrieb Petr Koval:
> Am Dienstag, 22. März 2005 20:45 schrieb Dzunko Lukas:
> > Mozno ti toto pomoze. Ja mam N6320 na usb.
> >
> > do jadra som pridal
> >
> > [*] USB Modem (CDC ACM) support
> >
> >  a potom sa v /dev objavi
> >
> > ls -l /dev/usb/acm/0
> > crw-------  1 root root 166, 0 mar 22 20:23 /dev/usb/acm/0
> >
> > ja som si spravil simboliscku linku na hento a pouzivam to ako bezny
> > modem (pripajam sa cez kppp alebo pppd)
> >
> > ls -l /dev/modem
> > lr-xr-xr-x  1 root root 9 mar 22 20:21 /dev/modem -> usb/acm/0
> >
> > neviem ci to funguje aj zo siemensom, ale ziadnu nokiu na usb mi to
> > zatial neodmietlo
>
> Tak u me Motorola A835 to zatim neslo :(
> Modem nereaguje dostanu odpoved

Takze rozchodit to zatim slo podle jedineho navodu. Na 
http://www.umtslink.at/3g-forum/showtopic.php?threadid=2802 se ale nenachzel 
jako prvni ale az na samem konci

007
03.06.2005, 01:31 Uhr
hoedlmoser

moje prvni testy sou tedy takove:

http://www.nux.at/newsportal/article.php/nux.network/318.html

pavilion ~ # cat Connect-drei.at

ABORT BUSY
ECHO ON
'' AT
OK ATZ
OK ATS0=0
OK AT+CGATT=0
OK AT+CGQREQ=1,0,0,0,0,0
OK AT+CGQMIN=1,0,0,0,0,0
OK AT+CGDCONT=1,"IP","drei.at","0.0.0.0",0,0
OK ATE1V1&D2
OK AT+IFC=2,2
OK ATD*99#
TIMEOUT 30

pavilion ~ # cat usb-start

/usr/sbin/pppd /dev/ttyACM0 115200 crtscts usepeerdns mtu 1500 mru 1500
noipdefault defaultroute user test password test domain drei.at lock
connect '/usr/sbin/chat -s -v -f /root/Connect-drei.at'

Sep 13 03:47:54 pavilion pppd[14116]: pppd 2.4.2 started by root, uid 0
Sep 13 03:47:59 pavilion pppd[14116]: Serial connection established.
Sep 13 03:47:59 pavilion pppd[14116]: Using interface ppp0
Sep 13 03:48:00 pavilion pppd[14116]: Connect: ppp0 <--> /dev/ttyACM0
Sep 13 03:48:01 pavilion pppd[14116]: PAP authentication succeeded
Sep 13 03:48:07 pavilion pppd[14116]: not replacing existing default route
to eth1 [10.10.10.1]
Sep 13 03:48:07 pavilion pppd[14116]: local  IP address 10.9.174.45
Sep 13 03:48:07 pavilion pppd[14116]: remote IP address 192.168.100.101
Sep 13 03:48:07 pavilion pppd[14116]: primary   DNS address 213.94.78.16
Sep 13 03:48:07 pavilion pppd[14116]: secondary DNS address 213.94.78.17

killall pppd

Sep 13 03:52:58 pavilion pppd[14116]: Terminating on signal 15.
Sep 13 03:52:58 pavilion pppd[14116]: Connection terminated.
Sep 13 03:52:58 pavilion pppd[14116]: Connect time 5.0 minutes.
Sep 13 03:52:58 pavilion pppd[14116]: Sent 141 bytes, received 64 bytes.
Sep 13 03:52:58 pavilion pppd[14116]: Hangup (SIGHUP)
Sep 13 03:52:58 pavilion pppd[14116]: Connect time 5.0 minutes.
Sep 13 03:52:58 pavilion pppd[14116]: Sent 141 bytes, received 64 bytes.
Sep 13 03:52:58 pavilion pppd[14116]: Exit.

http://www.nux.at/newsportal/article.php/nux.network/319.html

Sep 13 03:54:18 pavilion pppd[14200]: pppd 2.4.2 started by root, uid 0
Sep 13 03:54:23 pavilion pppd[14200]: Serial connection established.
Sep 13 03:54:23 pavilion pppd[14200]: Using interface ppp0
Sep 13 03:54:23 pavilion pppd[14200]: Connect: ppp0 <--> /dev/ttyACM0
Sep 13 03:54:24 pavilion pppd[14200]: PAP authentication succeeded
Sep 13 03:54:30 pavilion pppd[14200]: not replacing existing default route
to eth1 [10.10.10.1]
Sep 13 03:54:30 pavilion pppd[14200]: local  IP address 10.0.91.59
Sep 13 03:54:30 pavilion pppd[14200]: remote IP address 192.168.100.101
Sep 13 03:54:30 pavilion pppd[14200]: primary   DNS address 213.94.78.16
Sep 13 03:54:30 pavilion pppd[14200]: secondary DNS address 213.94.78.17

ppp0      Link encap:Point-to-Point Protocol
          inet addr:10.0.91.59  P-t-P:192.168.100.101  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:4 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:64 (64.0 b)  TX bytes:141 (141.0 b)

a testoval sem to takto i v restauraci na trznici ve zline pres t-mobile.cz 
gprs
a slo to samo taky
a dokonce i bez windowsu :)

pozn. to s tou routou a resolv si nevsimejte ja si samo default route a resolv 
manulne na kratce prehodil aby to slo
dulezite je ze jde ppp popr. ip spojeni

petr
Attachment:
pgpSD68dGVlbU.pgp (PGP signature)
Replies:
[no subject]
-- nn
Re: Siemens GPRS cez USB kabel
-- Petr Koval
References:
Siemens GPRS cez USB kabel
-- Ing. Ján Letko
Re: Siemens GPRS cez USB kabel
-- Dzunko Lukas
Re: Siemens GPRS cez USB kabel
-- Petr Koval
Navigation:
Lists: gentoo-user-cs: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
Re: Siemens GPRS cez USB kabel
Next by thread:
Re: Siemens GPRS cez USB kabel
Previous by date:
Re: Odmazavani zdrojovych kodu jadra
Next by date:
Re: Siemens GPRS cez USB kabel


Updated Jun 17, 2009

Summary: Archive of the gentoo-user-cs mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.