| 1 |
On Sat, 22 Oct 2005 16:01:42 +0200 |
| 2 |
Dzunko Lukas <lukas@××××××.sk> wrote: |
| 3 |
|
| 4 |
> > |
| 5 |
> Skus sa cez smart pozret ci ide len chybu komunikacie alebo sa ti disk |
| 6 |
> chysta do vecnich lovist. (smartctl -a /dev/hda) |
| 7 |
> |
| 8 |
|
| 9 |
Bohuzel nevim, co je a co neni dulezity, takze to posilam cely. Sice |
| 10 |
SMART Error Log Version: 1 |
| 11 |
No Errors Logged |
| 12 |
, ale Seek_Error_Rate a Raw_Read_Error_Rate udava vysoke hodnoty... |
| 13 |
|
| 14 |
A ted vidim, ze se po zalamani radek rozsypal layout a tak jsem to |
| 15 |
jeste vystavil na http://www.lnx.cz/smart/ |
| 16 |
|
| 17 |
PaD |
| 18 |
|
| 19 |
# smartctl -a /dev/hda |
| 20 |
smartctl version 5.33 [i386-pc-linux-gnu] Copyright (C) 2002-4 Bruce |
| 21 |
Allen Home page is http://smartmontools.sourceforge.net/ |
| 22 |
|
| 23 |
=== START OF INFORMATION SECTION === |
| 24 |
Device Model: ST94019A |
| 25 |
Serial Number: 3KW4DGCK |
| 26 |
Firmware Version: 3.09 |
| 27 |
User Capacity: 40,007,761,920 bytes |
| 28 |
Device is: Not in smartctl database [for details use: -P showall] |
| 29 |
ATA Version is: 6 |
| 30 |
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 |
| 31 |
Local Time is: Sat Oct 22 17:39:44 2005 CEST |
| 32 |
SMART support is: Available - device has SMART capability. |
| 33 |
SMART support is: Enabled |
| 34 |
|
| 35 |
=== START OF READ SMART DATA SECTION === |
| 36 |
SMART overall-health self-assessment test result: PASSED |
| 37 |
|
| 38 |
General SMART Values: |
| 39 |
Offline data collection status: (0x82) Offline data collection activity |
| 40 |
was completed without error. |
| 41 |
Auto Offline Data Collection: |
| 42 |
Enabled. Self-test execution status: ( 25) The self-test routine |
| 43 |
was aborted by the host. |
| 44 |
Total time to complete Offline |
| 45 |
data collection: ( 426) seconds. |
| 46 |
Offline data collection |
| 47 |
capabilities: (0x5b) SMART execute Offline immediate. |
| 48 |
Auto Offline data collection |
| 49 |
on/off support. Suspend Offline collection upon new |
| 50 |
command. |
| 51 |
Offline surface scan supported. |
| 52 |
Self-test supported. |
| 53 |
No Conveyance Self-test |
| 54 |
supported. Selective Self-test supported. |
| 55 |
SMART capabilities: (0x0003) Saves SMART data before entering |
| 56 |
power-saving mode. |
| 57 |
Supports SMART auto save timer. |
| 58 |
Error logging capability: (0x01) Error logging supported. |
| 59 |
No General Purpose Logging |
| 60 |
support. Short self-test routine |
| 61 |
recommended polling time: ( 1) minutes. |
| 62 |
Extended self-test routine |
| 63 |
recommended polling time: ( 31) minutes. |
| 64 |
|
| 65 |
SMART Attributes Data Structure revision number: 10 |
| 66 |
Vendor Specific SMART Attributes with Thresholds: |
| 67 |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE |
| 68 |
UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 055 |
| 69 |
052 034 Pre-fail Always - 109570218 3 |
| 70 |
Spin_Up_Time 0x0003 099 098 000 Pre-fail |
| 71 |
Always - 0 4 Start_Stop_Count 0x0032 047 047 |
| 72 |
020 Old_age Always - 54752 5 Reallocated_Sector_Ct |
| 73 |
0x0033 100 100 036 Pre-fail Always - 0 7 |
| 74 |
Seek_Error_Rate 0x000f 081 060 030 Pre-fail |
| 75 |
Always - 124616708 9 Power_On_Hours 0x0032 093 |
| 76 |
093 000 Old_age Always - 6469 10 |
| 77 |
Spin_Retry_Count 0x0013 100 100 034 Pre-fail |
| 78 |
Always - 0 12 Power_Cycle_Count 0x0032 100 100 |
| 79 |
020 Old_age Always - 595 192 Power-Off_Retract_Count |
| 80 |
0x0032 100 100 000 Old_age Always - 570 193 |
| 81 |
Load_Cycle_Count 0x0032 001 001 000 Old_age |
| 82 |
Always - 279976 194 Temperature_Celsius 0x0022 042 |
| 83 |
058 000 Old_age Always - 42 195 |
| 84 |
Hardware_ECC_Recovered 0x001a 055 052 000 Old_age |
| 85 |
Always - 109570218 197 Current_Pending_Sector 0x0012 |
| 86 |
100 100 000 Old_age Always - 0 198 |
| 87 |
Offline_Uncorrectable 0x0010 100 100 000 Old_age |
| 88 |
Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 |
| 89 |
000 Old_age Always - 0 200 Multi_Zone_Error_Rate |
| 90 |
0x0000 100 253 000 Old_age Offline - 0 202 |
| 91 |
TA_Increase_Count 0x0032 100 253 000 Old_age |
| 92 |
Always - 0 |
| 93 |
|
| 94 |
SMART Error Log Version: 1 |
| 95 |
No Errors Logged |
| 96 |
|
| 97 |
SMART Self-test log structure revision number 1 |
| 98 |
Num Test_Description Status Remaining |
| 99 |
LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by |
| 100 |
host 90% 2064 - # 2 Short offline |
| 101 |
Aborted by host 70% 2064 - |
| 102 |
|
| 103 |
SMART Selective self-test log data structure revision number 1 |
| 104 |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
| 105 |
1 0 0 Not_testing |
| 106 |
2 0 0 Not_testing |
| 107 |
3 0 0 Not_testing |
| 108 |
4 0 0 Not_testing |
| 109 |
5 0 0 Not_testing |
| 110 |
Selective self-test flags (0x0): |
| 111 |
After scanning selected spans, do NOT read-scan remainder of disk. |
| 112 |
If Selective self-test is pending on power-up, resume after 0 minute |
| 113 |
delay. |
| 114 |
-- |
| 115 |
gentoo-user-cs@g.o mailing list |
Archives