| 1 |
Hallo, |
| 2 |
ich verstehe den Rechner überhaupt nicht mehr, es kann doch nicht sein das der |
| 3 |
eine Kernel läuft und der andere Kernel welcher mit der selbigen config |
| 4 |
gebaut wurde nicht. |
| 5 |
Ich habe die config /proc/config.gz in menuconfig per Load an Alternate |
| 6 |
Configuration File geladen. Zuvor hatte ich sie entpackt. |
| 7 |
was ich bei diesem Kernel noch nicht gemacht habe, da er ja nicht richtig |
| 8 |
startet, ist das erstellen des nvidia moduls. Das läuft mit dem anderem |
| 9 |
Kernel. |
| 10 |
Wie bereits geschildert bleibt das starten an folgender stelle hängen. |
| 11 |
|
| 12 |
About to start the service coldplug |
| 13 |
1 Start service |
| 14 |
2 Skip service |
| 15 |
3 Continue bootprocess |
| 16 |
4 exit to shell |
| 17 |
Enter your selection: 1 |
| 18 |
Coldplugging innput devices... |
| 19 |
Coldplugging isapnp devices... |
| 20 |
Coldplugging pci devices... |
| 21 |
=System friert ein |
| 22 |
wenn ich dieses service start überspringe kann ich mich am ende anmelden, und |
| 23 |
erst mal nichts feststellen. |
| 24 |
|
| 25 |
Memtest86+ lief auch schon eine Nacht ohne Fehlermeldung, gibt es da noch |
| 26 |
Einstellungen die ich für einen anderen vielleicht besseren Test vornehmen |
| 27 |
kann? |
| 28 |
Mir kommt das jedenfalls so vor als gibt es noch ein eigenleben des Rechners, |
| 29 |
welches sich zur Aufgabe gemacht hat mich zu ärgern. |
| 30 |
|
| 31 |
Gibt es noch eine anderen Testbefehl bzw eine Ausgabe welche mir mehr verraten |
| 32 |
kann. |
| 33 |
dmesg gibt folgendes aus: (Die zum laufendem Kernel verschiedenen stellen |
| 34 |
hatte ich zwar bereits gepostet.) |
| 35 |
|
| 36 |
Linux version 2.6.20-gentoo-r6 (root@r1-gentoo) (gcc-Version 4.1.1 (Gentoo |
| 37 |
4.1.1-r3)) #8 SMP PREEMPT Thu May 17 22:57:22 CEST 2007 |
| 38 |
BIOS-provided physical RAM map: |
| 39 |
sanitize start |
| 40 |
sanitize end |
| 41 |
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: |
| 42 |
000000000009fc00 type: 1 |
| 43 |
copy_e820_map() type is E820_RAM |
| 44 |
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: |
| 45 |
00000000000a0000 type: 2 |
| 46 |
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: |
| 47 |
0000000000100000 type: 2 |
| 48 |
copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: |
| 49 |
000000003fff0000 type: 1 |
| 50 |
copy_e820_map() type is E820_RAM |
| 51 |
copy_e820_map() start: 000000003fff0000 size: 0000000000008000 end: |
| 52 |
000000003fff8000 type: 3 |
| 53 |
copy_e820_map() start: 000000003fff8000 size: 0000000000008000 end: |
| 54 |
0000000040000000 type: 4 |
| 55 |
copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: |
| 56 |
00000000fec01000 type: 2 |
| 57 |
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: |
| 58 |
00000000fee01000 type: 2 |
| 59 |
copy_e820_map() start: 00000000ffee0000 size: 0000000000020000 end: |
| 60 |
00000000fff00000 type: 2 |
| 61 |
copy_e820_map() start: 00000000fffc0000 size: 0000000000040000 end: |
| 62 |
0000000100000000 type: 2 |
| 63 |
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) |
| 64 |
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) |
| 65 |
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
| 66 |
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) |
| 67 |
BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) |
| 68 |
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) |
| 69 |
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
| 70 |
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) |
| 71 |
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) |
| 72 |
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) |
| 73 |
127MB HIGHMEM available. |
| 74 |
896MB LOWMEM available. |
| 75 |
Entering add_active_range(0, 0, 262128) 0 entries of 256 used |
| 76 |
Zone PFN ranges: |
| 77 |
DMA 0 -> 4096 |
| 78 |
Normal 4096 -> 229376 |
| 79 |
HighMem 229376 -> 262128 |
| 80 |
early_node_map[1] active PFN ranges |
| 81 |
0: 0 -> 262128 |
| 82 |
On node 0 totalpages: 262128 |
| 83 |
DMA zone: 32 pages used for memmap |
| 84 |
DMA zone: 0 pages reserved |
| 85 |
DMA zone: 4064 pages, LIFO batch:0 |
| 86 |
Normal zone: 1760 pages used for memmap |
| 87 |
Normal zone: 223520 pages, LIFO batch:31 |
| 88 |
HighMem zone: 255 pages used for memmap |
| 89 |
HighMem zone: 32497 pages, LIFO batch:7 |
| 90 |
DMI 2.3 present. |
| 91 |
Using APIC driver default |
| 92 |
ACPI: RSDP (v000 AMI ) @ 0x000fa340 |
| 93 |
ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x3fff0000 |
| 94 |
ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x3fff0030 |
| 95 |
ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000 |
| 96 |
ACPI: PM-Timer IO Port: 0x808 |
| 97 |
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) |
| 98 |
Detected 1244.775 MHz processor. |
| 99 |
Built 1 zonelists. Total pages: 260081 |
| 100 |
Kernel command line: root=/dev/hda5 softlevel=ohneX |
| 101 |
Local APIC disabled by BIOS -- you can enable it with "lapic" |
| 102 |
mapped APIC to ffffd000 (0180d000) |
| 103 |
Enabling fast FPU save and restore... done. |
| 104 |
Initializing CPU#0 |
| 105 |
PID hash table entries: 4096 (order: 12, 16384 bytes) |
| 106 |
Console: colour VGA+ 80x25 |
| 107 |
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| 108 |
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| 109 |
Memory: 1033412k/1048512k available (2973k kernel code, 14504k reserved, 1534k |
| 110 |
data, 260k init, 131008k highmem) |
| 111 |
virtual kernel memory layout: |
| 112 |
fixmap : 0xff2c3000 - 0xfffff000 (13552 kB) |
| 113 |
pkmap : 0xfec00000 - 0xff000000 (4096 kB) |
| 114 |
vmalloc : 0xf8800000 - 0xfebfe000 ( 99 MB) |
| 115 |
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) |
| 116 |
.init : 0xc056e000 - 0xc05af000 ( 260 kB) |
| 117 |
.data : 0xc03e7464 - 0xc0566ef8 (1534 kB) |
| 118 |
.text : 0xc0100000 - 0xc03e7464 (2973 kB) |
| 119 |
Checking if this processor honours the WP bit even in supervisor mode... Ok. |
| 120 |
Calibrating delay using timer specific routine.. 2490.12 BogoMIPS |
| 121 |
(lpj=1245061) |
| 122 |
Mount-cache hash table entries: 512 |
| 123 |
CPU: After generic identify, caps: 0183f9ff c1c3f9ff 00000000 00000000 |
| 124 |
00000000 00000000 00000000 |
| 125 |
Enabling disabled K7/SSE Support. |
| 126 |
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
| 127 |
CPU: L2 Cache: 256K (64 bytes/line) |
| 128 |
CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000420 00000000 |
| 129 |
00000000 00000000 |
| 130 |
Intel machine check architecture supported. |
| 131 |
Intel machine check reporting enabled on CPU#0. |
| 132 |
Compat vDSO mapped to ffffe000. |
| 133 |
Checking 'hlt' instruction... OK. |
| 134 |
SMP alternatives: switching to UP code |
| 135 |
Freeing SMP alternatives: 13k freed |
| 136 |
ACPI: Core revision 20060707 |
| 137 |
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired |
| 138 |
Parsing all Control Methods: |
| 139 |
Table [DSDT](id 0005) - 412 Objects with 41 Devices 143 Methods 18 Regions |
| 140 |
ACPI Namespace successfully loaded at root c06170f0 |
| 141 |
ACPI: setting ELCR to 0200 (from 0820) |
| 142 |
evxfevnt-0089 [02] enable : Transition to ACPI mode successful |
| 143 |
CPU0: AMD Athlon(tm) Processor stepping 00 |
| 144 |
SMP motherboard not detected. |
| 145 |
Local APIC not detected. Using dummy APIC emulation. |
| 146 |
Brought up 1 CPUs |
| 147 |
NET: Registered protocol family 16 |
| 148 |
ACPI: bus type pci registered |
| 149 |
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 |
| 150 |
PCI: Using configuration type 1 |
| 151 |
Setting up standard PCI resources |
| 152 |
evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int |
| 153 |
0x9 |
| 154 |
evgpeblk-0951 [04] ev_create_gpe_block : GPE 10 to 1F [_GPE] 2 regs on int |
| 155 |
0x9 |
| 156 |
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 0 Runtime |
| 157 |
GPEs in this block |
| 158 |
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime |
| 159 |
GPEs in this block |
| 160 |
Completing Region/Field/Buffer/Package |
| 161 |
initialization:............................................................................. |
| 162 |
Initialized 18/18 Regions 5/5 Fields 35/35 Buffers 19/30 Packages (421 nodes) |
| 163 |
Initializing Device/Processor/Thermal objects by executing _INI methods:. |
| 164 |
Executed 1 _INI methods requiring 0 _STA executions (examined 44 objects) |
| 165 |
ACPI: Interpreter enabled |
| 166 |
ACPI: Using PIC for interrupt routing |
| 167 |
ACPI: PCI Root Bridge [PCI0] (0000:00) |
| 168 |
PCI: Probing PCI hardware (bus 00) |
| 169 |
Uncovering SIS18 that hid as a SIS503 (compatible=1) |
| 170 |
Enabling SiS 96x SMBus. |
| 171 |
0000:00:02.5: cannot adjust BAR0 (not I/O) |
| 172 |
0000:00:02.5: cannot adjust BAR1 (not I/O) |
| 173 |
0000:00:02.5: cannot adjust BAR2 (not I/O) |
| 174 |
0000:00:02.5: cannot adjust BAR3 (not I/O) |
| 175 |
Boot video device is 0000:01:00.0 |
| 176 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| 177 |
ACPI: Power Resource [URP1] (off) |
| 178 |
ACPI: Power Resource [URP2] (off) |
| 179 |
ACPI: Power Resource [FDDP] (off) |
| 180 |
ACPI: Power Resource [LPTP] (off) |
| 181 |
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15) |
| 182 |
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. |
| 183 |
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15) |
| 184 |
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15) |
| 185 |
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. |
| 186 |
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. |
| 187 |
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. |
| 188 |
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15) |
| 189 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
| 190 |
SCSI subsystem initialized |
| 191 |
libata version 2.00 loaded. |
| 192 |
usbcore: registered new interface driver usbfs |
| 193 |
usbcore: registered new interface driver hub |
| 194 |
usbcore: registered new device driver usb |
| 195 |
PCI: Using ACPI for IRQ routing |
| 196 |
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report |
| 197 |
PCI: Bridge: 0000:00:01.0 |
| 198 |
IO window: disabled. |
| 199 |
MEM window: cde00000-cfefffff |
| 200 |
PREFETCH window: cbc00000-cdcfffff |
| 201 |
NET: Registered protocol family 2 |
| 202 |
IP route cache hash table entries: 32768 (order: 5, 131072 bytes) |
| 203 |
TCP established hash table entries: 131072 (order: 8, 1572864 bytes) |
| 204 |
TCP bind hash table entries: 65536 (order: 7, 786432 bytes) |
| 205 |
TCP: Hash tables configured (established 131072 bind 65536) |
| 206 |
TCP reno registered |
| 207 |
Machine check exception polling timer started. |
| 208 |
highmem bounce pool size: 64 pages |
| 209 |
Total HugeTLB memory allocated, 0 |
| 210 |
io scheduler noop registered |
| 211 |
io scheduler cfq registered (default) |
| 212 |
Linux agpgart interface v0.101 (c) Dave Jones |
| 213 |
agpgart: Detected SiS 735 chipset |
| 214 |
agpgart: AGP aperture is 64M @ 0xd0000000 |
| 215 |
input: Power Button (FF) as /class/input/input0 |
| 216 |
ACPI: Power Button (FF) [PWRF] |
| 217 |
input: Sleep Button (CM) as /class/input/input1 |
| 218 |
ACPI: Sleep Button (CM) [SLPB] |
| 219 |
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled |
| 220 |
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 221 |
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A |
| 222 |
Intel(R) PRO/1000 Network Driver - version 7.3.15-k2 |
| 223 |
Copyright (c) 1999-2006 Intel Corporation. |
| 224 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
| 225 |
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
| 226 |
Probing IDE interface ide0... |
| 227 |
hda: SAMSUNG SP8004H, ATA DISK drive |
| 228 |
hdb: HL-DT-ST GCE-8520B, ATAPI CD/DVD-ROM drive |
| 229 |
Probing IDE interface ide1... |
| 230 |
hdd: Maxtor 90845D4, ATA DISK drive |
| 231 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
| 232 |
ide1 at 0x170-0x177,0x376 on irq 15 |
| 233 |
hda: max request size: 128KiB |
| 234 |
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=65535/16/63 |
| 235 |
hda: cache flushes supported |
| 236 |
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > |
| 237 |
hdd: max request size: 128KiB |
| 238 |
hdd: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=16383/16/63 |
| 239 |
hdd: cache flushes not supported |
| 240 |
hdd: hdd1 |
| 241 |
hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache |
| 242 |
Uniform CD-ROM driver Revision: 3.20 |
| 243 |
3ware Storage Controller device driver for Linux v1.26.02.002. |
| 244 |
Fusion MPT base driver 3.04.03 |
| 245 |
Copyright (c) 1999-2007 LSI Logic Corporation |
| 246 |
Fusion MPT SPI Host driver 3.04.03 |
| 247 |
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
| 248 |
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 |
| 249 |
PCI: setting IRQ 11 as level-triggered |
| 250 |
ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> |
| 251 |
IRQ 11 |
| 252 |
ohci_hcd 0000:00:02.2: OHCI Host Controller |
| 253 |
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 |
| 254 |
ohci_hcd 0000:00:02.2: irq 11, io mem 0xcfffe000 |
| 255 |
usb usb1: configuration #1 chosen from 1 choice |
| 256 |
hub 1-0:1.0: USB hub found |
| 257 |
hub 1-0:1.0: 3 ports detected |
| 258 |
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 |
| 259 |
ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 11 (level, low) -> |
| 260 |
IRQ 11 |
| 261 |
ohci_hcd 0000:00:02.3: OHCI Host Controller |
| 262 |
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 |
| 263 |
ohci_hcd 0000:00:02.3: irq 11, io mem 0xcffff000 |
| 264 |
usb usb2: configuration #1 chosen from 1 choice |
| 265 |
hub 2-0:1.0: USB hub found |
| 266 |
hub 2-0:1.0: 3 ports detected |
| 267 |
usb 1-1: new full speed USB device using ohci_hcd and address 2 |
| 268 |
usb 1-1: configuration #1 chosen from 1 choice |
| 269 |
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 |
| 270 |
proto 2 vid 0x04A9 pid 0x1051 |
| 271 |
usbcore: registered new interface driver usblp |
| 272 |
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver |
| 273 |
Initializing USB Mass Storage driver... |
| 274 |
usbcore: registered new interface driver usb-storage |
| 275 |
USB Mass Storage support registered. |
| 276 |
usbcore: registered new interface driver usbhid |
| 277 |
drivers/usb/input/hid-core.c: v2.6:USB HID core driver |
| 278 |
PNP: No PS/2 controller found. Probing ports directly. |
| 279 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 280 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 281 |
mice: PS/2 mouse device common for all mice |
| 282 |
input: AT Translated Set 2 keyboard as /class/input/input2 |
| 283 |
TCP cubic registered |
| 284 |
NET: Registered protocol family 1 |
| 285 |
NET: Registered protocol family 10 |
| 286 |
IPv6 over IPv4 tunneling driver |
| 287 |
NET: Registered protocol family 17 |
| 288 |
Using IPI Shortcut mode |
| 289 |
Time: tsc clocksource has been installed. |
| 290 |
input: PS2++ Logitech MX Mouse as /class/input/input3 |
| 291 |
kjournald starting. Commit interval 5 seconds |
| 292 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 293 |
VFS: Mounted root (ext3 filesystem) readonly. |
| 294 |
Freeing unused kernel memory: 260k freed |
| 295 |
8139too Fast Ethernet driver 0.9.28 |
| 296 |
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 |
| 297 |
PCI: setting IRQ 5 as level-triggered |
| 298 |
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> |
| 299 |
IRQ 5 |
| 300 |
eth0: RealTek RTL8139 at 0xf8832f00, 00:40:f4:c0:b3:d2, IRQ 5 |
| 301 |
eth0: Identified 8139 chip type 'RTL-8100B/8139D' |
| 302 |
SIS5513: IDE controller at PCI slot 0000:00:02.5 |
| 303 |
SIS5513: chipset revision 208 |
| 304 |
SIS5513: not 100% native mode: will probe irqs later |
| 305 |
SIS5513: SiS735 ATA 100 (2nd gen) controller |
| 306 |
SIS5513: port 0x01f0 already claimed by ide0 |
| 307 |
SIS5513: port 0x0170 already claimed by ide1 |
| 308 |
SIS5513: neither IDE port enabled (BIOS) |
| 309 |
BUG: unable to handle kernel paging request at virtual address f903ef84 |
| 310 |
printing eip: |
| 311 |
c013dd94 |
| 312 |
*pde = 37ff9067 |
| 313 |
*pte = 00000000 |
| 314 |
Oops: 0002 [#1] |
| 315 |
PREEMPT SMP |
| 316 |
Modules linked in: sis5513 8139too |
| 317 |
CPU: 0 |
| 318 |
EIP: 0060:[<c013dd94>] Not tainted VLI |
| 319 |
EFLAGS: 00010282 (2.6.20-gentoo-r6 #8) |
| 320 |
EIP is at sys_init_module+0xd04/0x1bf0 |
| 321 |
eax: f903ef80 ebx: 001b001e ecx: f7ac8000 edx: f903ae80 |
| 322 |
esi: f8c5dc9c edi: f8848000 ebp: f8bc92cc esp: f7ac9ecc |
| 323 |
ds: 007b es: 007b ss: 0068 |
| 324 |
Process modprobe (pid: 875, ti=f7ac8000 task=f7a8b000 task.ti=f7ac8000) |
| 325 |
Stack: f8bc2480 c0165595 004322cc 00000000 00000000 00000000 00000000 f903ae80 |
| 326 |
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 |
| 327 |
00000000 00000000 00000000 00000000 00000000 00000011 0000001d 0000001c |
| 328 |
Call Trace: |
| 329 |
[<c0165595>] do_sync_read+0xd5/0x120 |
| 330 |
[<c0165ed1>] vfs_read+0xa1/0x160 |
| 331 |
[<c01654c0>] do_sync_read+0x0/0x120 |
| 332 |
[<c0105310>] sysenter_past_esp+0x5d/0x81 |
| 333 |
======================= |
| 334 |
Code: 30 ff 84 24 c8 00 00 00 83 c5 28 0f b7 c3 3b 84 24 c8 00 00 00 77 9a 8b |
| 335 |
44 24 70 8b 40 0c 89 44 24 1c 8b 54 24 1c 05 00 41 00 00 <89> 40 04 89 82 00 |
| 336 |
41 00 00 8b 44 24 1c 31 d2 05 40 01 00 00 42 |
| 337 |
EIP: [<c013dd94>] sys_init_module+0xd04/0x1bf0 SS:ESP 0068:f7ac9ecc |
| 338 |
<6>EXT3 FS on hda5, internal journal |
| 339 |
kjournald starting. Commit interval 5 seconds |
| 340 |
EXT3 FS on hda6, internal journal |
| 341 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 342 |
kjournald starting. Commit interval 5 seconds |
| 343 |
EXT3 FS on hda7, internal journal |
| 344 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 345 |
kjournald starting. Commit interval 5 seconds |
| 346 |
EXT3 FS on hda8, internal journal |
| 347 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 348 |
kjournald starting. Commit interval 5 seconds |
| 349 |
EXT3 FS on hda9, internal journal |
| 350 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 351 |
kjournald starting. Commit interval 5 seconds |
| 352 |
EXT3 FS on hda10, internal journal |
| 353 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 354 |
kjournald starting. Commit interval 5 seconds |
| 355 |
EXT3 FS on hda11, internal journal |
| 356 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 357 |
kjournald starting. Commit interval 5 seconds |
| 358 |
EXT3 FS on hda12, internal journal |
| 359 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 360 |
Adding 1052248k swap on /dev/hda3. Priority:-1 extents:1 across:1052248k |
| 361 |
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 |
| 362 |
eth0: no IPv6 routers present |
| 363 |
-- |
| 364 |
gentoo-user-de@g.o mailing list |
Archives