1 |
Hi, |
2 |
|
3 |
me too... |
4 |
> Was sagt denn ethtool auf pc1 zu if2 und if3? |
5 |
> Irgendwo einen paketfilter am laufen? |
6 |
|
7 |
|
8 |
|
9 |
ethtool eth1 gibt aus: |
10 |
|
11 |
Settings for eth1: |
12 |
Supported ports: [ TP MII ] |
13 |
Supported link modes: 10baseT/Half 10baseT/Full |
14 |
100baseT/Half 100baseT/Full |
15 |
Supports auto-negotiation: Yes |
16 |
Advertised link modes: 10baseT/Half 10baseT/Full |
17 |
100baseT/Half 100baseT/Full |
18 |
Advertised auto-negotiation: Yes |
19 |
Speed: 100Mb/s |
20 |
Duplex: Full |
21 |
Port: MII |
22 |
PHYAD: 32 |
23 |
Transceiver: internal |
24 |
Auto-negotiation: on |
25 |
Supports Wake-on: pumbg |
26 |
Wake-on: d |
27 |
Current message level: 0x00000007 (7) |
28 |
Link detected: yes |
29 |
|
30 |
und fuer eth2: |
31 |
|
32 |
Settings for eth2: |
33 |
Supported ports: [ TP MII ] |
34 |
Supported link modes: 10baseT/Half 10baseT/Full |
35 |
100baseT/Half 100baseT/Full |
36 |
Supports auto-negotiation: Yes |
37 |
Advertised link modes: 10baseT/Half 10baseT/Full |
38 |
100baseT/Half 100baseT/Full |
39 |
Advertised auto-negotiation: Yes |
40 |
Speed: 100Mb/s |
41 |
Duplex: Full |
42 |
Port: MII |
43 |
PHYAD: 32 |
44 |
Transceiver: internal |
45 |
Auto-negotiation: on |
46 |
Supports Wake-on: pumbg |
47 |
Wake-on: d |
48 |
Current message level: 0x00000007 (7) |
49 |
Link detected: yes |
50 |
|
51 |
Ich weiss nicht, wie es normal auszusehen hat... Ein Paketfilter ist nicht |
52 |
am laufen, ich teste das grade nur mit LiveCDs... |
53 |
|
54 |
Danke, |
55 |
|
56 |
Sven |