| 1 |
On Mon, 04 Oct 2004 12:10:11 +0200 |
| 2 |
Thomas Schweikle <tps@××××××.de> wrote: |
| 3 |
|
| 4 |
Moin! |
| 5 |
|
| 6 |
> wenn ich ein Firewire-HD-Laufwerk an den PC anschließe und dann |
| 7 |
> |
| 8 |
> insmod ieee1394 |
| 9 |
> insmod ohci1394 |
| 10 |
> insmod sbp2 |
| 11 |
> |
| 12 |
> absetze, sollte dann nicht "fdisk -l" die partitionen auf der |
| 13 |
> angeschlossenen HD anzeigen? |
| 14 |
> |
| 15 |
> Fehlt bei den Modulen noch eins? |
| 16 |
|
| 17 |
Hast du SCSI Harddisk und Generic Support aktiviert? |
| 18 |
Mein ipod erscheint nämlich als /dev/sda: |
| 19 |
|
| 20 |
ieee1394: Node changed: 0-00:1023 -> 0-01:1023 |
| 21 |
ieee1394: Node resumed: ID:BUS[0-01:1023] GUID[000a270002146b8f] |
| 22 |
ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... |
| 23 |
ohci1394: fw-host0: SelfID received outside of bus reset sequence |
| 24 |
ieee1394: Node changed: 0-01:1023 -> 0-00:1023 |
| 25 |
ieee1394: Node changed: 0-00:1023 -> 0-01:1023 |
| 26 |
scsi2 : SCSI emulation for IEEE-1394 SBP-2 Devices |
| 27 |
ieee1394: sbp2: Logged into SBP-2 device |
| 28 |
ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] |
| 29 |
Vendor: Apple Model: iPod Rev: 1.50 |
| 30 |
Type: Direct-Access ANSI SCSI revision: 02 |
| 31 |
SCSI device sda: 78126048 512-byte hdwr sectors (40001 MB) |
| 32 |
sda: test WP failed, assume Write Enabled |
| 33 |
sda: asking for cache data failed |
| 34 |
sda: assuming drive cache: write through |
| 35 |
/dev/scsi/host2/bus0/target0/lun0: p1 p2 |
| 36 |
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0 |
| 37 |
Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0 |
| 38 |
|
| 39 |
mfg, |
| 40 |
Christian Rubbert |
| 41 |
|
| 42 |
-- |
| 43 |
Get my public PGP key at http://www.xrc.de/rubbert.asc |
| 44 |
FP: ED26 7372 A351 9187 D36A D512 DAB6 0B0E 87D0 7A69 |
Archives