Re: [gentoo-user-es] Error al escribir cd

[Fabian Campanella]

proba a usar una distro q funcione desde cdrom y fijate si ahi va tu
grabadora!!!
me paso a mi q al actulizar gentoo cosas q andan dejan de hacerlo; no
todo lo q brilla... :´(

ademas... como me desuscribo de esta cuestion? en finnnn ya vere como
hacerlo >:/

On 5/24/05, Angel Cervera Claudio <angel@××××××××.com> wrote:
> Sospecho que se me ha fastidiado la grabadora de DVDs.
>
> Hace unos meses funcionaba bien.
>
> ¿Alguna idea O tiro la regrabadora?
>
> He probado con muchos cds virgenes, de distintos tipo y me da siempre el mismo error:
>
> # cdrecord -dev=ATAPI:0,0,0 speed=24 -v imagen.iso
>
> cdrecord: No write mode specified.
>
> cdrecord: Asuming -tao mode.
>
> cdrecord: Future versions of cdrecord may have different drive dependent defaults.
>
> cdrecord: Continuing in 5 seconds...
>
> Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
>
> on-the-fly encryption (version 1.0-rc1) built-in, (C) 2004,2005 Maximilian Decker
>
> NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
>
>       and thus may have bugs that are not present in the original version.
>
>       Please send bug reports and support requests to <burbon04 at gmx.de>.
>
>       For more information please see http://burbon04.gmxhome.de/linux/CDREncryption.html.
>
>       The original author should not be bothered with problems of this version.
>
> cdrecord: Warning: Running on Linux-2.6.11-gentoo-r6
>
> cdrecord: There are unsettled issues with Linux-2.5 and newer.
>
> cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
>
> TOC Type: 1 = CD-ROM
>
> scsidev: 'ATAPI:0,0,0'
>
> devname: 'ATAPI'
>
> scsibus: 0 target: 0 lun: 0
>
> Warning: Using ATA Packet interface.
>
> Warning: The related Linux kernel interface code seems to be unmaintained.
>
> Warning: There is absolutely NO DMA, operations thus are slow.
>
> Using libscg version 'schily-0.8'.
>
> SCSI buffer size: 64512
>
> atapi: 1
>
> Device type    : Removable CD-ROM
>
> Version        : 0
>
> Response Format: 2
>
> Capabilities   :
>
> Vendor_info    : 'HL-DT-ST'
>
> Identifikation : 'DVDRAM GSA-4081B'
>
> Revision       : 'A100'
>
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>
> Current: 0x0009
>
> Profile: 0x0012
>
> Profile: 0x0011
>
> Profile: 0x0014
>
> Profile: 0x0013
>
> Profile: 0x001A
>
> Profile: 0x001B
>
> Profile: 0x0010
>
> Profile: 0x0009 (current)
>
> Profile: 0x000A
>
> Profile: 0x0008
>
> Profile: 0x0002
>
> cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
>
> cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
>
> cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
>
> Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
>
> Driver flags   : MMC-3 SWABAUDIO BURNFREE
>
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
>
> Drive buf size : 1204224 = 1176 KB
>
> Drive DMA Speed: 11708 kB/s 66x CD 8x DVD
>
> FIFO size      : 4194304 = 4096 KB
>
> Track 01: data   702 MB
>
> Total size:      806 MB (79:54.05) = 359554 sectors
>
> Lout start:      806 MB (79:56/04) = 359554 sectors
>
> Current Secsize: 2048
>
> ATIP info from disk:
>
>   Indicated writing power: 5
>
>   Is not unrestricted
>
>   Is not erasable
>
>   Disk sub type: Medium Type B, low Beta category (B-) (4)
>
>   ATIP start of lead in:  -11607 (97:27/18)
>
>   ATIP start of lead out: 359849 (79:59/74)
>
> Disk type:    Short strategy type (Phthalocyanine or similar)
>
> Manuf. index: 18
>
> Manufacturer: Plasmon Data systems Ltd.
>
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 295
>
> Starting to write CD/DVD at speed 24 in real TAO mode for single session.
>
> Last chance to quit, starting real write    0 seconds. Operation starts.
>
> Waiting for reader process to fill input buffer ... input buffer ready.
>
> BURN-Free is ON.
>
> Turning BURN-Free off
>
> Performing OPC...
>
> Encryption feature disabled.
>
> Starting new track at sector: 0
>
> Track 01:    0 of  702 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
>
> CDB:  2A 00 00 00 01 F0 00 00 1F 00
>
> status: 0x2 (CHECK CONDITION)
>
> Sense Bytes: 70 00 04 00 00 00 00 10 34 10 04 80 09 01 00 00 00 00 00 00 00 00 00 00
>
> Sense Key: 0x4 Hardware Error, Segment 0
>
> Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
>
> Sense flags: Blk 0 (not valid)
>
> cmd finished after 2.922s timeout 40s
>
> write track data: error after 1015808 bytes
>
> cdrecord: A write error occured.
>
> cdrecord: Please properly read the error message above.
>
> cdrecord: Input/output error. test unit ready: scsi sendcmd: no error
>
> CDB:  00 00 00 00 00 00
>
> status: 0x2 (CHECK CONDITION)
>
> Sense Bytes: 71 00 04 00 00 00 00 10 34 10 04 80 09 01 00 00 00 00 00 00 00 00 00 00
>
> Sense Key: 0x4 Hardware Error, deferred error, Segment 0
>
> Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
>
> Sense flags: Blk 0 (not valid)
>
> cmd finished after 0.003s timeout 40s
>
> Writing  time:   26.223s
>
> Average write speed 183.2x.
>
> Fixating...
>
> Fixating time:    0.005s
>
> cdrecord: fifo had 80 puts and 17 gets.
>
> cdrecord: fifo was 0 times empty and 1 times full, min fill was 87%.
>
>
> --
> Ángel Cervera Claudio
> Freelance / desarrollos j2ee
> web: http://www.acervera.com
> tlf: 670819234 / 916058546
> email: angel@××××××××.com
> msn: angelcervera@××××××××××.com
> yahoo: angelcervera
> aol: angelcervera
> jabber: angelcervera en jabber.org
>
> --
> gentoo-user-es@g.o mailing list
>
>

-- 
gentoo-user-es@g.o mailing list