1 |
Tienes que usar UHCI o OHCI según tu hardware. La diferencia entre uhci |
2 |
y usb-uhci es sólo el nombre (creo que depende de la versión del kernel) |
3 |
|
4 |
On Mon, 2003-06-23 at 10:40, Pablo Pardo wrote: |
5 |
> Ahora mismo no me acuerdo de cual es la diferencia, pero creo que yo uso el |
6 |
> uhci, no el usb-uhci. A ver si eso funciona. Salu2. |
7 |
> |
8 |
> Pablo Pardo. |
9 |
> |
10 |
> ----- Original Message ----- |
11 |
> From: "David Gil" <enibal@×××××.es> |
12 |
> To: "Jesús González" <kch@×××××.org> |
13 |
> Cc: "gentoo-user-es" <gentoo-user-es@g.o> |
14 |
> Sent: Saturday, June 21, 2003 7:32 PM |
15 |
> Subject: Re: [gentoo-user-es] raton usb en portatil |
16 |
> |
17 |
> |
18 |
> > Pffff, te voy contestando: |
19 |
> > |
20 |
> > El sáb, 21 de 06 de 2003 a las 18:54, Jesús González escribió: |
21 |
> > > On s?, 2003-06-21 at 17:01, David Gil wrote: |
22 |
> > > > Hola lista. |
23 |
> > > > |
24 |
> > > > Acabo de comprarme un flamante portatil Sony VAIO, y me he comprado un |
25 |
> > > > ratón usb de estos opticos, pero no consigo configurarlo. |
26 |
> > > > |
27 |
> > > > He seguido el manual de configuración de escritorio sin ningún |
28 |
> > > > resultado. |
29 |
> > > > |
30 |
> > > > Os copio parte de lo que dice mi kernel cuando desenchufo y vuelvo a |
31 |
> > > > enchufar el ratón. |
32 |
> > > > |
33 |
> > > > usb.c: USB disconnect on device 00:0c.0-1 address 2 |
34 |
> > > > usb_control/bulk_msg: timeout |
35 |
> > > > usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 |
36 |
> ret |
37 |
> > > > -110 |
38 |
> > > > hub.c: new USB device 00:0c.0-1, assigned address 3 |
39 |
> > > > |
40 |
> > > > Y la configuración de mi XFree |
41 |
> > > > |
42 |
> > > > Identifier "Mouse1" |
43 |
> > > > Driver "mouse" |
44 |
> > > > Option "Protocol" "PS/2" |
45 |
> > > > Option "Device" "/dev/psaux" |
46 |
> > > > |
47 |
> > > > Identifier "USB Mice" |
48 |
> > > > Driver "mouse" |
49 |
> > > > Option "Protocol" "IMPS/2" |
50 |
> > > > Option "Device" "/dev/input/mice" |
51 |
> > > > Option "ZAxisMapping" "4 5" |
52 |
> > > > Option "Buttons" "3" |
53 |
> > > > |
54 |
> > > > InputDevice "Mouse1" "CorePointer" |
55 |
> > > > InputDevice "USB Mice" "SendCoreEvents" |
56 |
> > > > |
57 |
> > > > Si podeis ayudarme... no me apaño nada con el ratón del portátil. |
58 |
> > > > |
59 |
> > > > Gracias por adelantado. |
60 |
> > > > |
61 |
> > > > |
62 |
> > > > -- |
63 |
> > > > gentoo-user-es@g.o mailing list |
64 |
> > > > |
65 |
> > > |
66 |
> > > Yo tengo funcionando el touchpad y un ratón optico USB |
67 |
> > > esta es mi configuración |
68 |
> > > |
69 |
> > > root # lsmod |
70 |
> > > ... |
71 |
> > > mousedev 5492 1 |
72 |
> > > hid 22308 0 (unused) |
73 |
> > > input 5440 0 [mousedev hid] |
74 |
> > > usb-uhci 26316 0 (unused) |
75 |
> > > usbcore 75520 1 [usb-storage hid usb-uhci] |
76 |
> > > ... |
77 |
> > > |
78 |
> > |
79 |
> > Ya tengo todos esos módulos cargados: |
80 |
> > |
81 |
> > vaio root # lsmod |
82 |
> > Module Size Used by Not tainted |
83 |
> > usbmouse 2200 0 (unused) |
84 |
> > hid 14820 0 (unused) |
85 |
> > mousedev 4244 1 |
86 |
> > input 3520 0 [usbmouse mousedev] |
87 |
> > usb-uhci 23596 0 (unused) |
88 |
> > usbcore 63008 1 [usbmouse hid usb-uhci] |
89 |
> > radeon 80056 0 (unused) |
90 |
> > trident 29972 1 |
91 |
> > soundcore 3972 3 [trident] |
92 |
> > ac97_codec 10920 0 [trident] |
93 |
> > ide-scsi 8528 0 |
94 |
> > |
95 |
> > |
96 |
> > > y el XF86Config-4 |
97 |
> > > |
98 |
> > > Section "InputDevice" |
99 |
> > > Identifier "Mouse0" |
100 |
> > > Driver "mouse" |
101 |
> > > Option "Device" "/dev/gpmdata" |
102 |
> > > #Option "Device" "/dev/mouse" |
103 |
> > > Option "Protocol" "IMPS/2" |
104 |
> > > Option "Emulate3Buttons" "yes" |
105 |
> > > EndSection |
106 |
> > |
107 |
> > yo /dev/gmpdata no lo tengo, uso /dev/psaux. |
108 |
> > Y el protocolo no uso IMPS/2 pq se me vuelve loco el ratón, uso PS/2 |
109 |
> > |
110 |
> > > |
111 |
> > > Section "InputDevice" |
112 |
> > > Identifier "Mouse1" |
113 |
> > > Driver "mouse" |
114 |
> > > Option "Protocol" "IMPS/2" |
115 |
> > > Option "Device" "/dev/input/mice" |
116 |
> > > Option "SendCoreEvents" "yes" |
117 |
> > > Option "Emulate3Buttons" "no" |
118 |
> > > Option "ZAxisMapping" "4 5" |
119 |
> > > EndSection |
120 |
> > > |
121 |
> > > Section "ServerLayout" |
122 |
> > > Identifier "XFree86 Configured" |
123 |
> > > Screen 0 "Screen0" 0 0 |
124 |
> > > InputDevice "Mouse0" "CorePointer" |
125 |
> > > InputDevice "Mouse1" |
126 |
> > > InputDevice "Keyboard0" "CoreKeyboard" |
127 |
> > > EndSection |
128 |
> > |
129 |
> > Esto ahora lo tengo igual que tú para probar, y sigue sin funcionar :'(. |
130 |
> > |
131 |
> > > |
132 |
> > > |
133 |
> > > En lo único en lo que se diferencia del tuyo es en que yo pongo la |
134 |
> > > opción "SendCoreEvents" en la conf. del ratón, no en la del servidor, y |
135 |
> > > que además no tengo la directiva Buttons. |
136 |
> > > |
137 |
> > > y al conectar desconectar el ratón me dice: |
138 |
> > > |
139 |
> > > Jun 21 18:43:09 [kernel] usb.c: USB disconnect on device 00:1f.2-1 |
140 |
> > > address 2 |
141 |
> > > Jun 21 18:43:15 [kernel] hub.c: new USB device 00:1f.2-1, assigned |
142 |
> > > address 3 |
143 |
> > > Jun 21 18:43:15 [kernel] input0: USB HID v1.00 Mouse [KYE Genius USB |
144 |
> > > Wheel Mouse] on usb1:3.0 |
145 |
> > > |
146 |
> > |
147 |
> > Lo de los errores no se pq es... |
148 |
> > |
149 |
> > usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110 |
150 |
> > usb_control/bulk_msg: timeout |
151 |
> > usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110 |
152 |
> > usb_control/bulk_msg: timeout |
153 |
> > usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110 |
154 |
> > usb_control/bulk_msg: timeout |
155 |
> > usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110 |
156 |
> > usb_control/bulk_msg: timeout |
157 |
> > |
158 |
> > Así unos cuantos bastantes... |
159 |
> > |
160 |
> > > |
161 |
> > > Como ves, a mi no me da el error ese |
162 |
> > > |
163 |
> > > sbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110 |
164 |
> > > |
165 |
> > > ¿Tienes montado el usbdevfs? |
166 |
> > > |
167 |
> > > spiderman root # mount |
168 |
> > > ... |
169 |
> > > none on /proc/bus/usb type usbfs (rw) |
170 |
> > > |
171 |
> > > Por el error que te de tiene que ser algo de eso. (Se monta |
172 |
> > > automáticamente en mi caso, no aparece en el fstab) Prueba poniendo (si |
173 |
> > > no lo tienes montado) |
174 |
> > > |
175 |
> > > mount -t usbfs none /proc/bus/usb |
176 |
> > > |
177 |
> > |
178 |
> > Si, si que está montado: |
179 |
> > |
180 |
> > vaio root # mount |
181 |
> > /dev/hda3 on / type ext3 (rw,noatime) |
182 |
> > proc on /proc type proc (rw) |
183 |
> > none on /dev type devfs (rw) |
184 |
> > tmpfs on /mnt/.init.d type tmpfs (rw,mode=0644,size=2048k) |
185 |
> > tmpfs on /dev/shm type tmpfs (rw) |
186 |
> > usbdevfs on /proc/bus/usb type usbdevfs (rw) |
187 |
> > |
188 |
> > |
189 |
> > > Espero que te sirve de algo |
190 |
> > > |
191 |
> > |
192 |
> > Que extraño, no me funciona nada de lo que leo en los manuales, ni en |
193 |
> > los foros ni nada de nada. No se muy bien por donde seguir investigando. |
194 |
> > |
195 |
> > > Saludos |
196 |
> > > |
197 |
> > > |
198 |
> > > -- |
199 |
> > > gentoo-user-es@g.o mailing list |
200 |
> > > |
201 |
> > |
202 |
> > |
203 |
> > -- |
204 |
> > gentoo-user-es@g.o mailing list |
205 |
> |
206 |
> |
207 |
> -- |
208 |
> gentoo-user-es@g.o mailing list |
209 |
> |
210 |
|
211 |
|
212 |
-- |
213 |
gentoo-user-es@g.o mailing list |