1 |
Ahí lo llevas, (recuerda que además necesitas activar el ratón en la |
2 |
sección de input core support del kernel) |
3 |
|
4 |
# |
5 |
# USB support |
6 |
# |
7 |
CONFIG_USB=m |
8 |
# CONFIG_USB_DEBUG is not set |
9 |
CONFIG_USB_DEVICEFS=y |
10 |
# CONFIG_USB_BANDWIDTH is not set |
11 |
# CONFIG_USB_LONG_TIMEOUT is not set |
12 |
CONFIG_USB_EHCI_HCD=m |
13 |
CONFIG_USB_UHCI=m |
14 |
CONFIG_USB_UHCI_ALT=m |
15 |
CONFIG_USB_OHCI=m |
16 |
CONFIG_USB_AUDIO=m |
17 |
CONFIG_USB_EMI26=m |
18 |
CONFIG_USB_BLUETOOTH=m |
19 |
CONFIG_USB_MIDI=m |
20 |
CONFIG_USB_STORAGE=m |
21 |
# CONFIG_USB_STORAGE_DEBUG is not set |
22 |
# CONFIG_USB_STORAGE_DATAFAB is not set |
23 |
# CONFIG_USB_STORAGE_FREECOM is not set |
24 |
# CONFIG_USB_STORAGE_ISD200 is not set |
25 |
# CONFIG_USB_STORAGE_DPCM is not set |
26 |
# CONFIG_USB_STORAGE_HP8200e is not set |
27 |
# CONFIG_USB_STORAGE_SDDR09 is not set |
28 |
# CONFIG_USB_STORAGE_SDDR55 is not set |
29 |
# CONFIG_USB_STORAGE_JUMPSHOT is not set |
30 |
CONFIG_USB_ACM=m |
31 |
CONFIG_USB_PRINTER=m |
32 |
# CONFIG_USB_HID is not set |
33 |
# CONFIG_USB_HIDINPUT is not set |
34 |
# CONFIG_USB_HIDDEV is not set |
35 |
CONFIG_USB_KBD=m |
36 |
CONFIG_USB_MOUSE=m |
37 |
# CONFIG_USB_AIPTEK is not set |
38 |
# CONFIG_USB_WACOM is not set |
39 |
CONFIG_USB_DC2XX=m |
40 |
CONFIG_USB_MDC800=m |
41 |
CONFIG_USB_SCANNER=m |
42 |
CONFIG_USB_MICROTEK=m |
43 |
CONFIG_USB_HPUSBSCSI=m |
44 |
CONFIG_USB_IBMCAM=m |
45 |
CONFIG_USB_OV511=m |
46 |
CONFIG_USB_PWC=m |
47 |
CONFIG_USB_SE401=m |
48 |
CONFIG_USB_STV680=m |
49 |
CONFIG_USB_VICAM=m |
50 |
CONFIG_USB_DSBR=m |
51 |
CONFIG_USB_DABUSB=m |
52 |
# CONFIG_USB_PEGASUS is not set |
53 |
# CONFIG_USB_RTL8150 is not set |
54 |
# CONFIG_USB_KAWETH is not set |
55 |
# CONFIG_USB_CATC is not set |
56 |
# CONFIG_USB_CDCETHER is not set |
57 |
# CONFIG_USB_USBNET is not set |
58 |
# CONFIG_USB_USS720 is not set |
59 |
|
60 |
|
61 |
|
62 |
On Mon, 2003-06-23 at 15:56, David Gil wrote: |
63 |
> No tengo ese modulo. |
64 |
> |
65 |
> Yo pienso que deber ser un problema de mi configuración USB en el |
66 |
> kernel, pq el log del Xfree no escupe ningún error. |
67 |
> |
68 |
> ¿Alguien me pasa su config del kernel (solo la parte del usb) para |
69 |
> echarle un vistazo? |
70 |
> |
71 |
> Gracias. |
72 |
> |
73 |
> El lun, 23 de 06 de 2003 a las 10:40, Pablo Pardo escribió: |
74 |
> > Ahora mismo no me acuerdo de cual es la diferencia, pero creo que yo uso el |
75 |
> > uhci, no el usb-uhci. A ver si eso funciona. Salu2. |
76 |
> > |
77 |
> > Pablo Pardo. |
78 |
> > |
79 |
> > ----- Original Message ----- |
80 |
> > From: "David Gil" <enibal@×××××.es> |
81 |
> > To: "Jesús González" <kch@×××××.org> |
82 |
> > Cc: "gentoo-user-es" <gentoo-user-es@g.o> |
83 |
> > Sent: Saturday, June 21, 2003 7:32 PM |
84 |
> > Subject: Re: [gentoo-user-es] raton usb en portatil |
85 |
> > |
86 |
> > |
87 |
> > > Pffff, te voy contestando: |
88 |
> > > |
89 |
> > > El sáb, 21 de 06 de 2003 a las 18:54, Jesús González escribió: |
90 |
> > > > On s?, 2003-06-21 at 17:01, David Gil wrote: |
91 |
> > > > > Hola lista. |
92 |
> > > > > |
93 |
> > > > > Acabo de comprarme un flamante portatil Sony VAIO, y me he comprado un |
94 |
> > > > > ratón usb de estos opticos, pero no consigo configurarlo. |
95 |
> > > > > |
96 |
> > > > > He seguido el manual de configuración de escritorio sin ningún |
97 |
> > > > > resultado. |
98 |
> > > > > |
99 |
> > > > > Os copio parte de lo que dice mi kernel cuando desenchufo y vuelvo a |
100 |
> > > > > enchufar el ratón. |
101 |
> > > > > |
102 |
> > > > > usb.c: USB disconnect on device 00:0c.0-1 address 2 |
103 |
> > > > > usb_control/bulk_msg: timeout |
104 |
> > > > > usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 |
105 |
> > ret |
106 |
> > > > > -110 |
107 |
> > > > > hub.c: new USB device 00:0c.0-1, assigned address 3 |
108 |
> > > > > |
109 |
> > > > > Y la configuración de mi XFree |
110 |
> > > > > |
111 |
> > > > > Identifier "Mouse1" |
112 |
> > > > > Driver "mouse" |
113 |
> > > > > Option "Protocol" "PS/2" |
114 |
> > > > > Option "Device" "/dev/psaux" |
115 |
> > > > > |
116 |
> > > > > Identifier "USB Mice" |
117 |
> > > > > Driver "mouse" |
118 |
> > > > > Option "Protocol" "IMPS/2" |
119 |
> > > > > Option "Device" "/dev/input/mice" |
120 |
> > > > > Option "ZAxisMapping" "4 5" |
121 |
> > > > > Option "Buttons" "3" |
122 |
> > > > > |
123 |
> > > > > InputDevice "Mouse1" "CorePointer" |
124 |
> > > > > InputDevice "USB Mice" "SendCoreEvents" |
125 |
> > > > > |
126 |
> > > > > Si podeis ayudarme... no me apaño nada con el ratón del portátil. |
127 |
> > > > > |
128 |
> > > > > Gracias por adelantado. |
129 |
> > > > > |
130 |
> > > > > |
131 |
> > > > > -- |
132 |
> > > > > gentoo-user-es@g.o mailing list |
133 |
> > > > > |
134 |
> > > > |
135 |
> > > > Yo tengo funcionando el touchpad y un ratón optico USB |
136 |
> > > > esta es mi configuración |
137 |
> > > > |
138 |
> > > > root # lsmod |
139 |
> > > > ... |
140 |
> > > > mousedev 5492 1 |
141 |
> > > > hid 22308 0 (unused) |
142 |
> > > > input 5440 0 [mousedev hid] |
143 |
> > > > usb-uhci 26316 0 (unused) |
144 |
> > > > usbcore 75520 1 [usb-storage hid usb-uhci] |
145 |
> > > > ... |
146 |
> > > > |
147 |
> > > |
148 |
> > > Ya tengo todos esos módulos cargados: |
149 |
> > > |
150 |
> > > vaio root # lsmod |
151 |
> > > Module Size Used by Not tainted |
152 |
> > > usbmouse 2200 0 (unused) |
153 |
> > > hid 14820 0 (unused) |
154 |
> > > mousedev 4244 1 |
155 |
> > > input 3520 0 [usbmouse mousedev] |
156 |
> > > usb-uhci 23596 0 (unused) |
157 |
> > > usbcore 63008 1 [usbmouse hid usb-uhci] |
158 |
> > > radeon 80056 0 (unused) |
159 |
> > > trident 29972 1 |
160 |
> > > soundcore 3972 3 [trident] |
161 |
> > > ac97_codec 10920 0 [trident] |
162 |
> > > ide-scsi 8528 0 |
163 |
> > > |
164 |
> > > |
165 |
> > > > y el XF86Config-4 |
166 |
> > > > |
167 |
> > > > Section "InputDevice" |
168 |
> > > > Identifier "Mouse0" |
169 |
> > > > Driver "mouse" |
170 |
> > > > Option "Device" "/dev/gpmdata" |
171 |
> > > > #Option "Device" "/dev/mouse" |
172 |
> > > > Option "Protocol" "IMPS/2" |
173 |
> > > > Option "Emulate3Buttons" "yes" |
174 |
> > > > EndSection |
175 |
> > > |
176 |
> > > yo /dev/gmpdata no lo tengo, uso /dev/psaux. |
177 |
> > > Y el protocolo no uso IMPS/2 pq se me vuelve loco el ratón, uso PS/2 |
178 |
> > > |
179 |
> > > > |
180 |
> > > > Section "InputDevice" |
181 |
> > > > Identifier "Mouse1" |
182 |
> > > > Driver "mouse" |
183 |
> > > > Option "Protocol" "IMPS/2" |
184 |
> > > > Option "Device" "/dev/input/mice" |
185 |
> > > > Option "SendCoreEvents" "yes" |
186 |
> > > > Option "Emulate3Buttons" "no" |
187 |
> > > > Option "ZAxisMapping" "4 5" |
188 |
> > > > EndSection |
189 |
> > > > |
190 |
> > > > Section "ServerLayout" |
191 |
> > > > Identifier "XFree86 Configured" |
192 |
> > > > Screen 0 "Screen0" 0 0 |
193 |
> > > > InputDevice "Mouse0" "CorePointer" |
194 |
> > > > InputDevice "Mouse1" |
195 |
> > > > InputDevice "Keyboard0" "CoreKeyboard" |
196 |
> > > > EndSection |
197 |
> > > |
198 |
> > > Esto ahora lo tengo igual que tú para probar, y sigue sin funcionar :'(. |
199 |
> > > |
200 |
> > > > |
201 |
> > > > |
202 |
> > > > En lo único en lo que se diferencia del tuyo es en que yo pongo la |
203 |
> > > > opción "SendCoreEvents" en la conf. del ratón, no en la del servidor, y |
204 |
> > > > que además no tengo la directiva Buttons. |
205 |
> > > > |
206 |
> > > > y al conectar desconectar el ratón me dice: |
207 |
> > > > |
208 |
> > > > Jun 21 18:43:09 [kernel] usb.c: USB disconnect on device 00:1f.2-1 |
209 |
> > > > address 2 |
210 |
> > > > Jun 21 18:43:15 [kernel] hub.c: new USB device 00:1f.2-1, assigned |
211 |
> > > > address 3 |
212 |
> > > > Jun 21 18:43:15 [kernel] input0: USB HID v1.00 Mouse [KYE Genius USB |
213 |
> > > > Wheel Mouse] on usb1:3.0 |
214 |
> > > > |
215 |
> > > |
216 |
> > > Lo de los errores no se pq es... |
217 |
> > > |
218 |
> > > usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110 |
219 |
> > > usb_control/bulk_msg: timeout |
220 |
> > > usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110 |
221 |
> > > usb_control/bulk_msg: timeout |
222 |
> > > usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110 |
223 |
> > > usb_control/bulk_msg: timeout |
224 |
> > > usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110 |
225 |
> > > usb_control/bulk_msg: timeout |
226 |
> > > |
227 |
> > > Así unos cuantos bastantes... |
228 |
> > > |
229 |
> > > > |
230 |
> > > > Como ves, a mi no me da el error ese |
231 |
> > > > |
232 |
> > > > sbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110 |
233 |
> > > > |
234 |
> > > > ¿Tienes montado el usbdevfs? |
235 |
> > > > |
236 |
> > > > spiderman root # mount |
237 |
> > > > ... |
238 |
> > > > none on /proc/bus/usb type usbfs (rw) |
239 |
> > > > |
240 |
> > > > Por el error que te de tiene que ser algo de eso. (Se monta |
241 |
> > > > automáticamente en mi caso, no aparece en el fstab) Prueba poniendo (si |
242 |
> > > > no lo tienes montado) |
243 |
> > > > |
244 |
> > > > mount -t usbfs none /proc/bus/usb |
245 |
> > > > |
246 |
> > > |
247 |
> > > Si, si que está montado: |
248 |
> > > |
249 |
> > > vaio root # mount |
250 |
> > > /dev/hda3 on / type ext3 (rw,noatime) |
251 |
> > > proc on /proc type proc (rw) |
252 |
> > > none on /dev type devfs (rw) |
253 |
> > > tmpfs on /mnt/.init.d type tmpfs (rw,mode=0644,size=2048k) |
254 |
> > > tmpfs on /dev/shm type tmpfs (rw) |
255 |
> > > usbdevfs on /proc/bus/usb type usbdevfs (rw) |
256 |
> > > |
257 |
> > > |
258 |
> > > > Espero que te sirve de algo |
259 |
> > > > |
260 |
> > > |
261 |
> > > Que extraño, no me funciona nada de lo que leo en los manuales, ni en |
262 |
> > > los foros ni nada de nada. No se muy bien por donde seguir investigando. |
263 |
> > > |
264 |
> > > > Saludos |
265 |
> > > > |
266 |
> > > > |
267 |
> > > > -- |
268 |
> > > > gentoo-user-es@g.o mailing list |
269 |
> > > > |
270 |
> > > |
271 |
> > > |
272 |
> > > -- |
273 |
> > > gentoo-user-es@g.o mailing list |
274 |
> > |
275 |
> > |
276 |
> > -- |
277 |
> > gentoo-user-es@g.o mailing list |
278 |
> > |
279 |
> |
280 |
> |
281 |
> -- |
282 |
> gentoo-user-es@g.o mailing list |
283 |
> |
284 |
|
285 |
|
286 |
-- |
287 |
gentoo-user-es@g.o mailing list |