1 |
faco-gentoo root # dmesg |
2 |
ver Revision: 7.00alpha2 |
3 |
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
4 |
VP_IDE: IDE controller at PCI slot 0000:00:11.1 |
5 |
VP_IDE: chipset revision 6 |
6 |
VP_IDE: not 100% native mode: will probe irqs later |
7 |
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
8 |
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 |
9 |
ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:pio |
10 |
ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA |
11 |
hda: Maxtor 6E040L0, ATA DISK drive |
12 |
Using anticipatory io scheduler |
13 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
14 |
hdc: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive |
15 |
hdd: Hewlett-Packard CD-Writer Plus 8100, ATAPI CD/DVD-ROM drive |
16 |
ide1 at 0x170-0x177,0x376 on irq 15 |
17 |
hda: max request size: 128KiB |
18 |
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133) |
19 |
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > |
20 |
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) |
21 |
Uniform CD-ROM driver Revision: 3.12 |
22 |
hdd: ATAPI 24X CD-ROM CD-R/RW drive, 1024kB Cache, DMA |
23 |
Console: switching to colour frame buffer device 80x30 |
24 |
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver |
25 |
v2.1 |
26 |
uhci_hcd 0000:00:10.0: UHCI Host Controller |
27 |
uhci_hcd 0000:00:10.0: irq 21, io base 0000d800 |
28 |
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 |
29 |
hub 1-0:1.0: USB hub found |
30 |
hub 1-0:1.0: 2 ports detected |
31 |
uhci_hcd 0000:00:10.1: UHCI Host Controller |
32 |
uhci_hcd 0000:00:10.1: irq 21, io base 0000dc00 |
33 |
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 |
34 |
hub 2-0:1.0: USB hub found |
35 |
hub 2-0:1.0: 2 ports detected |
36 |
uhci_hcd 0000:00:10.2: UHCI Host Controller |
37 |
uhci_hcd 0000:00:10.2: irq 21, io base 0000e000 |
38 |
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 |
39 |
hub 3-0:1.0: USB hub found |
40 |
hub 3-0:1.0: 2 ports detected |
41 |
drivers/usb/core/usb.c: registered new driver hiddev |
42 |
drivers/usb/core/usb.c: registered new driver hid |
43 |
drivers/usb/input/hid-core.c: v2.0:USB HID core driver |
44 |
mice: PS/2 mouse device common for all mice |
45 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
46 |
input: AT Translated Set 2 keyboard on isa0060/serio0 |
47 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
48 |
I2O Core - (C) Copyright 1999 Red Hat Software |
49 |
I2O: Event thread created as pid 12 |
50 |
i2o: Checking for PCI I2O controllers... |
51 |
I2O configuration manager v 0.04. |
52 |
(C) Copyright 1999 Red Hat Software |
53 |
NET: Registered protocol family 2 |
54 |
IP: routing cache hash table of 4096 buckets, 32Kbytes |
55 |
TCP: Hash tables configured (established 32768 bind 32768) |
56 |
NET: Registered protocol family 1 |
57 |
NET: Registered protocol family 10 |
58 |
IPv6 over IPv4 tunneling driver |
59 |
NET: Registered protocol family 17 |
60 |
ACPI: (supports S0 S1 S4 S5) |
61 |
request_module: failed /sbin/modprobe -- nls_iso8859-1. error = -16 |
62 |
Unable to load NLS charset iso8859-1 |
63 |
found reiserfs format "3.6" with standard journal |
64 |
Reiserfs journal params: device hda3, size 8192, journal first block 18, max |
65 |
trans len 1024, max batch 900, max commit age 30, max trans age 30 |
66 |
reiserfs: checking transaction log (hda3) for (hda3) |
67 |
Using r5 hash to sort names |
68 |
VFS: Mounted root (reiserfs filesystem) readonly. |
69 |
Freeing unused kernel memory: 376k freed |
70 |
hub 1-0:1.0: new USB device on port 2, assigned address 2 |
71 |
Adding 514040k swap on /dev/hda5. Priority:-1 extents:1 |
72 |
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled |
73 |
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
74 |
CSLIP: code copyright 1989 Regents of the University of California |
75 |
PPP generic driver version 2.4.2 |
76 |
found reiserfs format "3.6" with standard journal |
77 |
Reiserfs journal params: device hda7, size 8192, journal first block 18, max |
78 |
trans len 1024, max batch 900, max commit age 30, max trans age 30 |
79 |
reiserfs: checking transaction log (hda7) for (hda7) |
80 |
Using r5 hash to sort names |
81 |
found reiserfs format "3.6" with standard journal |
82 |
Reiserfs journal params: device hda6, size 8192, journal first block 18, max |
83 |
trans len 1024, max batch 900, max commit age 30, max trans age 30 |
84 |
reiserfs: checking transaction log (hda6) for (hda6) |
85 |
Using r5 hash to sort names |
86 |
found reiserfs format "3.6" with standard journal |
87 |
Reiserfs journal params: device hda2, size 8192, journal first block 18, max |
88 |
trans len 1024, max batch 900, max commit age 30, max trans age 30 |
89 |
reiserfs: checking transaction log (hda2) for (hda2) |
90 |
Using r5 hash to sort names |
91 |
drivers/usb/input/hid-core.c: ctrl urb status -104 received |
92 |
drivers/usb/input/hid-core.c: timeout initializing reports |
93 |
|
94 |
input: USB HID v1.00 Mouse [Logitech Inc. iFeel Mouse ] on |
95 |
usb-0000:00:10.0-2 |
96 |
eth0: no IPv6 routers present |
97 |
|
98 |
|
99 |
faco-gentoo root # lspci -v |
100 |
00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge |
101 |
Subsystem: VIA Technologies, Inc. P4M266 Host Bridge |
102 |
Flags: bus master, 66Mhz, medium devsel, latency 8 |
103 |
Memory at e8000000 (32-bit, prefetchable) [size=32M] |
104 |
Capabilities: [a0] AGP version 2.0 |
105 |
Capabilities: [c0] Power Management version 2 |
106 |
|
107 |
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if |
108 |
00 [Normal decode]) |
109 |
Flags: bus master, 66Mhz, medium devsel, latency 0 |
110 |
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 |
111 |
Memory behind bridge: ea000000-ebffffff |
112 |
Prefetchable memory behind bridge: e0000000-e7ffffff |
113 |
Capabilities: [80] Power Management version 2 |
114 |
|
115 |
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08) |
116 |
Subsystem: Creative Labs CT4760 SBLive! |
117 |
Flags: bus master, medium devsel, latency 32, IRQ 17 |
118 |
I/O ports at d000 [size=32] |
119 |
Capabilities: [dc] Power Management version 1 |
120 |
|
121 |
00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev |
122 |
08) |
123 |
Subsystem: Creative Labs Gameport Joystick |
124 |
Flags: bus master, medium devsel, latency 32 |
125 |
I/O ports at d400 [size=8] |
126 |
Capabilities: [dc] Power Management version 1 |
127 |
|
128 |
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 |
129 |
[UHCI]) |
130 |
Subsystem: VIA Technologies, Inc. USB |
131 |
Flags: bus master, medium devsel, latency 32, IRQ 21 |
132 |
I/O ports at d800 [size=32] |
133 |
Capabilities: [80] Power Management version 2 |
134 |
|
135 |
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 |
136 |
[UHCI]) |
137 |
Subsystem: VIA Technologies, Inc. USB |
138 |
Flags: bus master, medium devsel, latency 32, IRQ 21 |
139 |
I/O ports at dc00 [size=32] |
140 |
Capabilities: [80] Power Management version 2 |
141 |
|
142 |
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 |
143 |
[UHCI]) |
144 |
Subsystem: VIA Technologies, Inc. USB |
145 |
Flags: bus master, medium devsel, latency 32, IRQ 21 |
146 |
I/O ports at e000 [size=32] |
147 |
Capabilities: [80] Power Management version 2 |
148 |
|
149 |
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 |
150 |
[EHCI]) |
151 |
Subsystem: VIA Technologies, Inc. USB 2.0 |
152 |
Flags: bus master, medium devsel, latency 32, IRQ 21 |
153 |
Memory at ec000000 (32-bit, non-prefetchable) [size=256] |
154 |
Capabilities: [80] Power Management version 2 |
155 |
|
156 |
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge |
157 |
Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge |
158 |
Flags: bus master, stepping, medium devsel, latency 0 |
159 |
Capabilities: [c0] Power Management version 2 |
160 |
|
161 |
00:11.1 IDE interface: VIA Technologies, Inc. |
162 |
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) |
163 |
(prog-if 8a [Master SecP PriP]) |
164 |
Subsystem: VIA Technologies, Inc. |
165 |
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE |
166 |
Flags: bus master, medium devsel, latency 32, IRQ 20 |
167 |
I/O ports at e400 [size=16] |
168 |
Capabilities: [c0] Power Management version 2 |
169 |
|
170 |
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) |
171 |
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet |
172 |
Controller on VT8235 |
173 |
Flags: bus master, medium devsel, latency 32, IRQ 23 |
174 |
I/O ports at e800 [size=256] |
175 |
Memory at ec001000 (32-bit, non-prefetchable) [size=256] |
176 |
Capabilities: [40] Power Management version 2 |
177 |
|
178 |
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] |
179 |
(prog-if 00 [VGA]) |
180 |
Subsystem: S3 Inc. VT8375 [ProSavage8 KM266/KL266] |
181 |
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 16 |
182 |
Memory at eb000000 (32-bit, non-prefetchable) [size=512K] |
183 |
Memory at e0000000 (32-bit, prefetchable) [size=128M] |
184 |
Expansion ROM at <unassigned> [disabled] [size=64K] |
185 |
Capabilities: [dc] Power Management version 2 |
186 |
Capabilities: [80] AGP version 2.0 |
187 |
|
188 |
|
189 |
--- |
190 |
|
191 |
I tried what you said, but ..., nothing !! |
192 |
|
193 |
:( |
194 |
|
195 |
|
196 |
On Thursday 08 January 2004 00:44, Onur Kucuk wrote: |
197 |
> On Wed, 7 Jan 2004 21:19:10 -0300 |
198 |
> linux-newbie-owner@×××××××××××.org wrote: |
199 |
> |
200 |
> LNOKO> You mean, to copy and paste de .config file, and what "lspci -v" |
201 |
> LNOKO> and"dmesg" says ? |
202 |
> |
203 |
> |
204 |
> Yes I meant that, in case my suggestion does not help. |
205 |
|
206 |
-- |
207 |
Facundo Suárez |
208 |
FDSoft SA |
209 |
icq:121172697 |
210 |
jabber:faco@××××××××××.ar |
211 |
msn:facundo_suarez |
212 |
Neuquén-Argentina |