Re: [gentoo-user-es] Tecla Alt Gr

[Diego Navarro]

he probado lo que has puesto pero nada de nada, sigo sin poder utilizar
la tecla alt gr en ninguna aplicacion
mi archivo /etc/rc.conf es el siguiente:

# /etc/rc.conf: Global startup script configuration settings
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/rc.conf,v 1.20
2003/04/27 18:39:59 azarah Exp $

# Use KEYMAP to specify the default console keymap.  There is a complete
tree
# of keymaps in /usr/share/keymaps to choose from.  This setting is used
by the
# /etc/init.d/keymaps script.

KEYMAP="es euro2"

# The map to load for extended keyboards.  Most users should leave this
as is.

SET_WINDOWKEYS="yes"
EXTENDED_KEYMAP=
##EXTENDED_KEYMAPS="backspace keypad"

# CONSOLEFONT specifies the default font that you'd like Linux to use on
the
# console.  You can find a good selection of fonts in
/usr/share/consolefonts;
# you shouldn't specify the trailing ".psf.gz", just the font name
below.
# To use the default console font, comment out the CONSOLEFONT setting
below.
# This setting is used by the /etc/init.d/consolefont script (NOTE: if
you do
# not want to use it, run "rc-update del consolefont" as root).

CONSOLEFONT="lat9w-16"

# CONSOLETRANSALTION is the charset map file to use.  Leave commented to
use
# the default one.  Have a look in /usr/share/consoletrans for a
selection of
# map files you can use.

#CONSOLETRANSLATION="8859-1_to_uni"

# Set CLOCK to "UTC" if your system clock is set to UTC (also known as
# Greenwich Mean Time).  If your clock is set to the local time, then
set CLOCK
# to "local".  This setting is used by the /etc/init.d/clock script.

CLOCK="local"

# Set EDITOR to your preferred editor.

EDITOR="/bin/nano"
#EDITOR="/usr/bin/vim"
#EDITOR="/usr/bin/emacs"

# Set PROTOCOLS to the protocols that you plan to use.  Gentoo Linux
will only
# enable module auto-loading for these protocols, eliminating annoying
module
# not found errors.
#
# NOTE: Do NOT uncomment the next lines, but add them to 'PROTOCOLS=...'
line!!
#
# Num   Protocol
# 1:    Unix
# 2:    IPv4
# 3:    Amateur Radio AX.25
# 4:    IPX
# 5:    DDP / appletalk
# 6:    Amateur Radio NET/ROM
# 9:    X.25
# 10:   IPv6
# 11:   ROSE / Amateur Radio X.25 PLP
# 19:   Acorn Econet

# Most users want this:
PROTOCOLS="1 2"

#For IPv6 support:
#PROTOCOLS="1 2 10"

# What display manager do you use ?  [ xdm | gdm | kdm | elogin |
entrance ]
DISPLAYMANAGER="gdm"

# XSESSION is a new variable to control what window manager to start
# default with X if run with xdm, startx or xinit.  The default behavior
# is to look in /etc/X11/Sessions/ and run the script in matching the
# value that XSESSION is set to.  The support scripts is smart enouth to
# look in all bin directories if it cant find a match in
/etc/X11/Sessions/,
# so setting it to "enligtenment" can also work.  This is basically used
# as a way for the system admin to configure a default system wide WM,
# allthough it will work if the user export XSESSION in his
.bash_profile, etc.
#
# NOTE:  1) this behaviour is overridden when a ~/.xinitrc exists, and
startx
#           is called.
#        2) even if a ~/.xsession exist, if XSESSION can be resolved, it
will
#           be executed rather than ~/.xsession, else KDM breaks ...
#
# Defaults depending on what you install currently include:
#
# Gnome - will start gnome-session
# kde-<version> - will start startkde (ex: kde-3.0.2)
# Xsession - will start a terminal and a few other nice apps

XSESSION="Gnome"



El jue, 12-02-2004 a las 18:50, Anarconda escribió:
> 	En mi opinión no es un problema del XF86Config, es decir, la tecla te
> ha de funcionar en la consola (por ejemplo, para poner la arroba de una
> dirección e-mail) si no puedes conseguirlo prueba lo siguiente en el
> archivo /etc/rc.conf
>
> ===============================
> KEYMAP="es euro2"
>
> # Should we first load the 'windowkeys' console keymap?  Most x86 users will
> # say "yes" here.  Note that non-x86 users should leave it as "no".
>
> SET_WINDOWKEYS="yes"
>
> # The maps to load for extended keyboards.  Most users will leave this
> as is.
>
> EXTENDED_KEYMAPS=
> #EXTENDED_KEYMAPS="backspace keypad"
>
> # CONSOLEFONT specifies the default font that you'd like Linux to use on the
> # console.  You can find a good selection of fonts in
> /usr/share/consolefonts;
> # you shouldn't specify the trailing ".psf.gz", just the font name below.
> # To use the default console font, comment out the CONSOLEFONT setting
> below.
> # This setting is used by the /etc/init.d/consolefont script (NOTE: if
> you do
> # not want to use it, run "rc-update del consolefont" as root).
>
> CONSOLEFONT="lat9w-16"
>
> ===============================
>
> A mi me funciona perfectamente y espero que a ti también.
>
> Saludos.
>
>
> Diego Navarro wrote:
> > no hay manera, alguien tiene alguna idea de por que no puedo utilizar
> > esa tecla?? yo creo tener los ficheros de configuracion correctamente
> > si alguien es tan amable podria poner sus archivos para compararlos con
> > los mios para saber donde esta el fallo
> > gracias
> >
> >
> > El mié, 11-02-2004 a las 16:54, Marcos Garcia escribió:
> >
> >>para cosas del teclado yo lo configuré con el  comando "xf86cfg"
> >>y me va todo genial (teclado de 105 teclas, multimedia gracias al programa
> >>"hotkeys" y el driver para Itouch)
> >>suerte
> >>El Miércoles, 11 de Febrero de 2004 01:39, diego escribió:
> >>
> >>>El caso es que hace poco he reinstalado de nuevo pero ahora tengo el
> >>>problema de que la tecla alt gr no funciona
> >>>Tengo el teclado Genius Comfy KB-19e y he probado tanto con 102 teclas
> >>>como con 105. creo recordar que la anterior vez tenia puesto 105
> >>>Alguna idea de por que no me funciona?
> >>>
> >>>Estos son los ficheros
> >>>/etc/X11/XF86config
> >>># File generated by xf86config.
> >>>
> >>>
> >>>Section "Module"
> >>>
> >>># This loads the DBE extension module.
> >>>
> >>>    Load        "dbe"     # Double buffer extension
> >>>
> >>>    SubSection  "extmod"
> >>>      Option    "omit xfree86-dga"   # don't initialise the DGA
> >>>extension
> >>>    EndSubSection
> >>>
> >>># This loads the Type1 and FreeType font modules
> >>>    Load        "type1"
> >>>    Load        "speedo"
> >>>
> >>>EndSection
> >>>
> >>># **********************************************************************
> >>>
> >>># Files section.  This allows default font and rgb paths to be set
> >>># **********************************************************************
> >>>
> >>>
> >>>Section "Files"
> >>>
> >>>
> >>>    RgbPath   "/usr/X11R6/lib/X11/rgb"
> >>>
> >>>
> >>>    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
> >>>    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
> >>>    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
> >>>    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
> >>>    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
> >>>    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
> >>>#    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
> >>>#    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
> >>>    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
> >>>    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
> >>>
> >>>
> >>>
> >>>EndSection
> >>>
> >>># **********************************************************************
> >>>
> >>># Server flags section.
> >>># **********************************************************************
> >>>
> >>>
> >>>Section "ServerFlags"
> >>>
> >>>
> >>>
> >>>EndSection
> >>>
> >>># **********************************************************************
> >>>
> >>># Input devices
> >>># **********************************************************************
> >>>
> >>>
> >>># **********************************************************************
> >>>
> >>># Core keyboard's InputDevice section
> >>># **********************************************************************
> >>>
> >>>
> >>>Section "InputDevice"
> >>>
> >>>    Identifier   "Keyboard1"
> >>>    Driver   "Keyboard"
> >>>
> >>>    Option "AutoRepeat" "500 30"
> >>>
> >>>    Option "XkbRules"   "xfree86"
> >>>    Option "XkbModel"   "pc105"
> >>>    Option "XkbLayout"   "es"
> >>>    Option "XkbVariant"   "es"
> >>>
> >>>EndSection
> >>>
> >>>
> >>># **********************************************************************
> >>>
> >>># Core Pointer's InputDevice section
> >>># **********************************************************************
> >>>
> >>>
> >>>Section "InputDevice"
> >>>
> >>># Identifier and driver
> >>>
> >>>    Identifier   "Mouse1"
> >>>    Driver   "mouse"
> >>>    Option "Protocol"    "IMPS/2"
> >>>    Option "Device"      "/dev/mouse"
> >>>    Option "ZAxisMapping"   "4 5"
> >>>
> >>>EndSection
> >>>
> >>># **********************************************************************
> >>>
> >>># Monitor section
> >>># **********************************************************************
> >>>
> >>>
> >>># Any number of monitor sections may be present
> >>>
> >>>Section "Monitor"
> >>>
> >>>    Identifier  "lg"
> >>>
> >>>
> >>>    HorizSync   31.5 - 48.5
> >>>
> >>>    VertRefresh 50-100
> >>>
> >>>EndSection
> >>>
> >>>
> >>># **********************************************************************
> >>>
> >>># Graphics device section
> >>># **********************************************************************
> >>>
> >>>
> >>># Standard VGA Device:
> >>>
> >>>Section "Device"
> >>>    Identifier   "Standard VGA"
> >>>    VendorName   "Unknown"
> >>>    BoardName   "Unknown"
> >>>
> >>>    Driver     "vga"
> >>>
> >>>EndSection
> >>>
> >>># Device configured by xf86config:
> >>>
> >>>Section "Device"
> >>>    Identifier  "gforce4mx"
> >>>    Driver      "nv"
> >>>    #VideoRam    65536
> >>>    # Insert Clocks lines here if appropriate
> >>>EndSection
> >>>
> >>>
> >>># **********************************************************************
> >>>
> >>># Screen sections
> >>># **********************************************************************
> >>>
> >>>
> >>>
> >>>Section "Screen"
> >>>    Identifier  "Screen 1"
> >>>    Device      "gforce4mx"
> >>>    Monitor     "lg"
> >>>    DefaultDepth 24
> >>>
> >>>    Subsection "Display"
> >>>        Depth       8
> >>>        Modes       "1280x1024" "1024x768" "800x600" "640x480"
> >>>        ViewPort    0 0
> >>>    EndSubsection
> >>>    Subsection "Display"
> >>>        Depth       16
> >>>        Modes       "1280x1024" "1024x768" "800x600" "640x480"
> >>>        ViewPort    0 0
> >>>    EndSubsection
> >>>    Subsection "Display"
> >>>        Depth       24
> >>>        Modes       "1280x1024" "1024x768" "800x600" "640x480"
> >>>        ViewPort    0 0
> >>>    EndSubsection
> >>>EndSection
> >>>
> >>># **********************************************************************
> >>>
> >>># ServerLayout sections.
> >>># **********************************************************************
> >>>
> >>>
> >>>
> >>>Section "ServerLayout"
> >>>
> >>># The Identifier line must be present
> >>>    Identifier  "Simple Layout"
> >>>
> >>>
> >>>    Screen "Screen 1"
> >>>
> >>>
> >>>    InputDevice "Mouse1" "CorePointer"
> >>>    InputDevice "Keyboard1" "CoreKeyboard"
> >>>
> >>>EndSection
> >>>
> >>># EndSection
> >>>
> >>>/etc/rc.conf
> >>># /etc/rc.conf: Global startup script configuration settings
> >>>
> >>>
> >>>KEYMAP="es euro2"
> >>>
> >>># The map to load for extended keyboards.  Most users should leave this
> >>>as is.
> >>>
> >>>EXTENDED_KEYMAP="windowkeys"
> >>>
> >>>CONSOLEFONT="lat0-16"
> >>>
> >>>
> >>>#CONSOLETRANSLATION="8859-1_to_uni"
> >>>
> >>>
> >>>CLOCK="local"
> >>>
> >>># Set EDITOR to your preferred editor.
> >>>
> >>>EDITOR="/bin/nano"
> >>>
> >>># NOTE: Do NOT uncomment the next lines, but add them to 'PROTOCOLS=...'
> >>>line!!
> >>>#
> >>># Num   Protocol
> >>># 1:    Unix
> >>># 2:    IPv4
> >>># 3:    Amateur Radio AX.25
> >>># 4:    IPX
> >>># 5:    DDP / appletalk
> >>># 6:    Amateur Radio NET/ROM
> >>># 9:    X.25
> >>># 10:   IPv6
> >>># 11:   ROSE / Amateur Radio X.25 PLP
> >>># 19:   Acorn Econet
> >>>
> >>># Most users want this:
> >>>PROTOCOLS="1 2"
> >>>
> >>># What display manager do you use ?  [ xdm | gdm | kdm | elogin |
> >>>entrance ]
> >>>DISPLAYMANAGER="gdm"
> >>>
> >>>
> >>>
> >>>XSESSION="Gnome"
> >>
> >>--
> >>gentoo-user-es@g.o mailing list
> >>
> >>
> >>---Publicidad--------------------------------------------------------
> >>Únete a los miles de sin pareja en Meetic... ¡te vas a enamorar!
> >>http://www.iespana.es/_reloc/email.meetic
> >
> >
> >
> > ---Publicidad--------------------------------------------------------
> > Juega con Ventura24.es, lotería inteligente y multiplica tus
> > posibilidades!! http://www.iespana.es/_reloc/email.ventura
> >
> >
> >
> > --
> > gentoo-user-es@g.o mailing list
> >
> >


---Publicidad--------------------------------------------------------
Únete a los miles de sin pareja en Meetic... ¡te vas a enamorar!
http://www.iespana.es/_reloc/email.meetic


--
gentoo-user-es@g.o mailing list