| 1 |
hola gente: |
| 2 |
|
| 3 |
estaba yo tan contento que habíamos comprado un dell para ponerlo como |
| 4 |
servidor y jubilar ya el piii que se queda un poco dormido.. |
| 5 |
|
| 6 |
entonces les digo a mis compis que me inserten el livecd y me den acceso |
| 7 |
por red.. para ver si empezaba a instalarle algo.. ya sabeis "empezar es |
| 8 |
tener la mitad del trabajo hecho" |
| 9 |
|
| 10 |
pero me pego la primera en la frente.. |
| 11 |
no consigo activar el disco duro.. ñññeee |
| 12 |
|
| 13 |
no encuentro nada en el /dev/ a lo que hacerle un fdisk.. |
| 14 |
si que hay un /dev/hda pero solo tiene 52megas.. creo que es un invento |
| 15 |
del liveCd.. o no lo entiendo: [1] |
| 16 |
|
| 17 |
|
| 18 |
estoy seguro que es cargar algún módulo pero no sé cual.. |
| 19 |
mi esperiencia con otros DELL con discos duros SCSI tambien era activar |
| 20 |
el módulo 'aacraid' |
| 21 |
|
| 22 |
pero se me ha quedado pillado en el 'modprobe' aunque parece que lo ha |
| 23 |
levantado.. no se corta ni con ctrl+c ni con kill -9.. |
| 24 |
|
| 25 |
he intentado levantar otros módulos mirando los help de los módulos del |
| 26 |
kernel: |
| 27 |
# modprobe scsi_mod |
| 28 |
FATAL: Module scsi_mod not found. |
| 29 |
# modprobe sg |
| 30 |
este no da error.. pero nadie lo usa |
| 31 |
|
| 32 |
he encontrado esto en google: |
| 33 |
http://www.linuxquestions.org/questions/archive/47/2005/03/1/262404 |
| 34 |
pero no veo que me ayude a activar mi disco. |
| 35 |
|
| 36 |
|
| 37 |
aquí adjunto todos los datos que puedo recopilar a ver si a alguien se |
| 38 |
le ocurre alguna sugerencia. |
| 39 |
|
| 40 |
gracias |
| 41 |
d2clon |
| 42 |
|
| 43 |
[1]------- |
| 44 |
livecd root # fdisk /dev/hda |
| 45 |
You will not be able to write the partition table. |
| 46 |
Note: sector size is 2048 (not 512) |
| 47 |
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF |
| 48 |
disklabel |
| 49 |
Building a new DOS disklabel. Changes will remain in memory only, |
| 50 |
until you decide to write them. After that, of course, the previous |
| 51 |
content won't be recoverable. |
| 52 |
|
| 53 |
Warning: invalid flag 0x0000 of partition table 4 will be corrected by |
| 54 |
w(rite) |
| 55 |
|
| 56 |
Command (m for help): p |
| 57 |
|
| 58 |
Disk /dev/hda: 52 MB, 52992000 bytes |
| 59 |
255 heads, 63 sectors/track, 1 cylinders |
| 60 |
Units = cylinders of 16065 * 2048 = 32901120 bytes |
| 61 |
|
| 62 |
Device Boot Start End Blocks Id System |
| 63 |
|
| 64 |
|
| 65 |
==lsmod===================================== |
| 66 |
Module Size Used by |
| 67 |
aacraid 31463 1 |
| 68 |
ipv6 182560 12 |
| 69 |
ata_piix 5574 1 |
| 70 |
libata 25316 1 ata_piix |
| 71 |
evdev 6464 0 |
| 72 |
tg3 65860 0 |
| 73 |
parport_pc 27072 0 |
| 74 |
parport 22728 1 parport_pc |
| 75 |
sbp2 16744 0 |
| 76 |
ohci1394 24836 0 |
| 77 |
ieee1394 62008 2 sbp2,ohci1394 |
| 78 |
ohci_hcd 15044 0 |
| 79 |
uhci_hcd 23152 0 |
| 80 |
usb_storage 46208 0 |
| 81 |
ehci_hcd 21028 0 |
| 82 |
|
| 83 |
== lspci ========================== |
| 84 |
(fijaos que no sale ningún dispositivo SCSI.. a ver si va a ser que no |
| 85 |
está enchufado el disco duro o algo) |
| 86 |
|
| 87 |
0000:00:00.0 Host bridge: Intel Corp.: Unknown device 2588 (rev 04) |
| 88 |
0000:00:01.0 PCI bridge: Intel Corp.: Unknown device 2589 (rev 04) |
| 89 |
0000:00:02.0 VGA compatible controller: Intel Corp.: Unknown device 258a |
| 90 |
(rev 04) |
| 91 |
0000:00:1c.0 PCI bridge: Intel Corp.: Unknown device 2660 (rev 03) |
| 92 |
0000:00:1c.1 PCI bridge: Intel Corp.: Unknown device 2662 (rev 03) |
| 93 |
0000:00:1d.0 USB Controller: Intel Corp.: Unknown device 2658 (rev 03) |
| 94 |
0000:00:1d.1 USB Controller: Intel Corp.: Unknown device 2659 (rev 03) |
| 95 |
0000:00:1d.2 USB Controller: Intel Corp.: Unknown device 265a (rev 03) |
| 96 |
0000:00:1d.3 USB Controller: Intel Corp.: Unknown device 265b (rev 03) |
| 97 |
0000:00:1d.7 USB Controller: Intel Corp.: Unknown device 265c (rev 03) |
| 98 |
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev d3) |
| 99 |
0000:00:1f.0 ISA bridge: Intel Corp.: Unknown device 2640 (rev 03) |
| 100 |
0000:00:1f.1 IDE interface: Intel Corp.: Unknown device 266f (rev 03) |
| 101 |
0000:00:1f.2 IDE interface: Intel Corp.: Unknown device 2652 (rev 03) |
| 102 |
0000:00:1f.3 SMBus: Intel Corp.: Unknown device 266a (rev 03) |
| 103 |
0000:02:00.0 Ethernet controller: Broadcom Corporation: Unknown device |
| 104 |
1677 (rev 01) |
| 105 |
0000:04:02.0 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID |
| 106 |
(rev 10) |
| 107 |
0000:04:02.1 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID |
| 108 |
(rev 10) |
| 109 |
|
| 110 |
== ls -l /dev/ ============== |
| 111 |
(quitando todos lo "tty" que había mogollón) |
| 112 |
(si os fijais hay un hda.. pero solo tiene 52 megas.. creo que es un |
| 113 |
invento del liveCd) |
| 114 |
total 0 |
| 115 |
lrwxrwxrwx 1 root root 8 Sep 28 19:42 cdrom -> /dev/hda |
| 116 |
drwxr-xr-x 2 root root 0 Sep 28 19:41 cdroms |
| 117 |
lrwxrwxrwx 1 root root 11 Sep 28 19:41 core -> /proc/kcore |
| 118 |
drwxr-xr-x 2 root root 0 Sep 28 19:41 fb |
| 119 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 fb0 -> fb/0 |
| 120 |
crw-rw---- 1 root root 10, 62 Sep 28 19:41 fbsplash |
| 121 |
lrwxrwxrwx 1 root root 13 Sep 28 19:41 fd -> /proc/self/fd |
| 122 |
crw-rw-rw- 1 root root 1, 7 Sep 28 19:41 full |
| 123 |
brw-rw---- 1 root cdrom 3, 0 Sep 28 19:41 hda |
| 124 |
drwxr-xr-x 3 root root 0 Sep 28 19:41 ide |
| 125 |
prw------- 1 root root 0 Sep 28 19:42 initctl |
| 126 |
crw-rw---- 1 root root 10, 63 Sep 28 19:41 inotify |
| 127 |
drwxr-xr-x 2 root root 0 Sep 28 19:41 input |
| 128 |
crw-r----- 1 root kmem 1, 2 Sep 28 19:41 kmem |
| 129 |
crw-rw---- 1 root root 1, 11 Sep 28 19:41 kmsg |
| 130 |
srw-rw-rw- 1 root root 0 Sep 28 19:42 log |
| 131 |
drwxr-xr-x 2 root root 0 Sep 28 19:41 loop |
| 132 |
lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop0 -> loop/0 |
| 133 |
lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop1 -> loop/1 |
| 134 |
lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop2 -> loop/2 |
| 135 |
lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop3 -> loop/3 |
| 136 |
lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop4 -> loop/4 |
| 137 |
lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop5 -> loop/5 |
| 138 |
lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop6 -> loop/6 |
| 139 |
lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop7 -> loop/7 |
| 140 |
crw-r----- 1 root kmem 1, 1 Sep 28 19:41 mem |
| 141 |
crw-rw-rw- 1 root root 1, 3 Sep 28 19:41 null |
| 142 |
crw-r----- 1 root kmem 1, 4 Sep 28 19:41 port |
| 143 |
drwxr-xr-x 2 root root 0 Sep 28 19:41 pts |
| 144 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram0 -> rd/0 |
| 145 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram1 -> rd/1 |
| 146 |
lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram10 -> rd/10 |
| 147 |
lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram11 -> rd/11 |
| 148 |
lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram12 -> rd/12 |
| 149 |
lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram13 -> rd/13 |
| 150 |
lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram14 -> rd/14 |
| 151 |
lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram15 -> rd/15 |
| 152 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram2 -> rd/2 |
| 153 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram3 -> rd/3 |
| 154 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram4 -> rd/4 |
| 155 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram5 -> rd/5 |
| 156 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram6 -> rd/6 |
| 157 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram7 -> rd/7 |
| 158 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram8 -> rd/8 |
| 159 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram9 -> rd/9 |
| 160 |
crw-rw-rw- 1 root root 1, 8 Sep 28 19:41 random |
| 161 |
drwxr-xr-x 2 root root 0 Sep 28 19:41 rd |
| 162 |
drwxrwxrwt 2 root root 40 Sep 28 19:41 shm |
| 163 |
lrwxrwxrwx 1 root root 24 Sep 28 19:41 sndstat -> |
| 164 |
/proc/asound/oss/sndstat |
| 165 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 stderr -> fd/2 |
| 166 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 stdin -> fd/0 |
| 167 |
lrwxrwxrwx 1 root root 4 Sep 28 19:41 stdout -> fd/1 |
| 168 |
drwxr-xr-x 2 root root 0 Sep 28 19:41 tts |
| 169 |
cr--r--r-- 1 root root 1, 9 Sep 28 19:41 urandom |
| 170 |
drwxr-xr-x 2 root root 0 Sep 28 19:41 vc |
| 171 |
drwxr-xr-x 2 root root 0 Sep 28 19:42 vcc |
| 172 |
lrwxrwxrwx 1 root root 5 Sep 28 19:41 vcs -> vcc/0 |
| 173 |
lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs1 -> vcc/1 |
| 174 |
lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcs12 -> vcc/12 |
| 175 |
lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs2 -> vcc/2 |
| 176 |
lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs3 -> vcc/3 |
| 177 |
lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs4 -> vcc/4 |
| 178 |
lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs5 -> vcc/5 |
| 179 |
lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs6 -> vcc/6 |
| 180 |
lrwxrwxrwx 1 root root 6 Sep 28 19:41 vcsa -> vcc/a0 |
| 181 |
lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa1 -> vcc/a1 |
| 182 |
lrwxrwxrwx 1 root root 7 Sep 28 19:42 vcsa12 -> vcc/a12 |
| 183 |
lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa2 -> vcc/a2 |
| 184 |
lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa3 -> vcc/a3 |
| 185 |
lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa4 -> vcc/a4 |
| 186 |
lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa5 -> vcc/a5 |
| 187 |
lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa6 -> vcc/a6 |
| 188 |
crw-rw-rw- 1 root root 1, 5 Sep 28 19:41 zero |
| 189 |
|
| 190 |
|
| 191 |
===dmesg========= |
| 192 |
Linux version 2.6.9-gentoo-r1 (root@inertia) (gcc version 3.3.4 20040623 |
| 193 |
(Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 SMP Thu Nov 25 |
| 194 |
03:24:02 UTC 2004 |
| 195 |
BIOS-provided physical RAM map: |
| 196 |
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) |
| 197 |
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
| 198 |
BIOS-e820: 0000000000100000 - 000000003f68cc00 (usable) |
| 199 |
BIOS-e820: 000000003f68cc00 - 000000003f68ec00 (ACPI NVS) |
| 200 |
BIOS-e820: 000000003f68ec00 - 000000003f690c00 (ACPI data) |
| 201 |
BIOS-e820: 000000003f690c00 - 0000000040000000 (reserved) |
| 202 |
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) |
| 203 |
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) |
| 204 |
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) |
| 205 |
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) |
| 206 |
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) |
| 207 |
118MB HIGHMEM available. |
| 208 |
896MB LOWMEM available. |
| 209 |
found SMP MP-table at 000fe710 |
| 210 |
On node 0 totalpages: 259724 |
| 211 |
DMA zone: 4096 pages, LIFO batch:1 |
| 212 |
Normal zone: 225280 pages, LIFO batch:16 |
| 213 |
HighMem zone: 30348 pages, LIFO batch:7 |
| 214 |
DMI 2.3 present. |
| 215 |
ACPI: RSDP (v000 DELL ) @ 0x000fec00 |
| 216 |
ACPI: RSDT (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fcc8f |
| 217 |
ACPI: FADT (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fcccb |
| 218 |
ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd0e5e |
| 219 |
ACPI: MADT (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fcd3f |
| 220 |
ACPI: BOOT (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fcdb1 |
| 221 |
ACPI: MCFG (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fcdd9 |
| 222 |
ACPI: HPET (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fce17 |
| 223 |
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 |
| 224 |
ACPI: Local APIC address 0xfee00000 |
| 225 |
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) |
| 226 |
Processor #0 15:4 APIC version 20 |
| 227 |
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) |
| 228 |
Processor #1 15:4 APIC version 20 |
| 229 |
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) |
| 230 |
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) |
| 231 |
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) |
| 232 |
Using ACPI for processor (LAPIC) configuration information |
| 233 |
Intel MultiProcessor Specification v1.4 |
| 234 |
Virtual Wire compatibility mode. |
| 235 |
OEM ID: DELL Product ID: PE SC420 APIC at: 0xFEE00000 |
| 236 |
I/O APIC #8 Version 32 at 0xFEC00000. |
| 237 |
Enabling APIC mode: Flat. Using 1 I/O APICs |
| 238 |
Processors: 2 |
| 239 |
Built 1 zonelists |
| 240 |
Kernel command line: initrd=gentoo.igz root=/dev/ram0 init=/linuxrc |
| 241 |
acpi=ht looptype=squashfs loop=/livecd.squashfs udev nodevfs cdroot |
| 242 |
vga=791 dokeymap splash=silent,theme:livecd-2004.3 BOOT_IMAGE=gentoo |
| 243 |
fbsplash: silent |
| 244 |
fbsplash: theme livecd-2004.3 |
| 245 |
Initializing CPU#0 |
| 246 |
PID hash table entries: 4096 (order: 12, 65536 bytes) |
| 247 |
Detected 2794.605 MHz processor. |
| 248 |
Using tsc for high-res timesource |
| 249 |
Speakup v-2.00 CVS: Wed Oct 20 14:26:13 EDT 2004 : initialized |
| 250 |
Console: colour dummy device 80x25 |
| 251 |
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| 252 |
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| 253 |
Memory: 1023644k/1038896k available (2296k kernel code, 14560k reserved, |
| 254 |
536k data, 576k init, 121392k highmem) |
| 255 |
Checking if this processor honours the WP bit even in supervisor mode... Ok. |
| 256 |
Calibrating delay loop... 5505.02 BogoMIPS (lpj=2752512) |
| 257 |
Mount-cache hash table entries: 512 (order: 0, 4096 bytes) |
| 258 |
Couldn't initialize miscdevice /dev/synth. |
| 259 |
CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 |
| 260 |
CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000 |
| 261 |
monitor/mwait feature present. |
| 262 |
using mwait in idle threads. |
| 263 |
CPU: Trace cache: 12K uops, L1 D cache: 16K |
| 264 |
CPU: L2 cache: 1024K |
| 265 |
CPU: Physical Processor ID: 0 |
| 266 |
CPU: After all inits, caps: bfebfbff 00100000 00000000 00000080 |
| 267 |
Enabling fast FPU save and restore... done. |
| 268 |
Enabling unmasked SIMD FPU exception support... done. |
| 269 |
Checking 'hlt' instruction... OK. |
| 270 |
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01 |
| 271 |
per-CPU timeslice cutoff: 2926.23 usecs. |
| 272 |
task migration cache decay timeout: 3 msecs. |
| 273 |
Booting processor 1/1 eip 2000 |
| 274 |
Initializing CPU#1 |
| 275 |
Calibrating delay loop... 5570.56 BogoMIPS (lpj=2785280) |
| 276 |
CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 |
| 277 |
CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000 |
| 278 |
monitor/mwait feature present. |
| 279 |
CPU: Trace cache: 12K uops, L1 D cache: 16K |
| 280 |
CPU: L2 cache: 1024K |
| 281 |
CPU: Physical Processor ID: 0 |
| 282 |
CPU: After all inits, caps: bfebfbff 00100000 00000000 00000080 |
| 283 |
CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01 |
| 284 |
Total of 2 processors activated (11075.58 BogoMIPS). |
| 285 |
ENABLING IO-APIC IRQs |
| 286 |
..TIMER: vector=0x31 pin1=2 pin2=0 |
| 287 |
checking TSC synchronization across 2 CPUs: passed. |
| 288 |
Brought up 2 CPUs |
| 289 |
checking if image is initramfs...it isn't (no cpio magic); looks like an |
| 290 |
initrd |
| 291 |
Freeing initrd memory: 1615k freed |
| 292 |
NET: Registered protocol family 16 |
| 293 |
EISA bus registered |
| 294 |
PCI: PCI BIOS revision 2.10 entry at 0xfb34b, last bus=4 |
| 295 |
PCI: Using MMCONFIG |
| 296 |
mtrr: v2.0 (20020519) |
| 297 |
ACPI: Subsystem revision 20040816 |
| 298 |
ACPI: Interpreter disabled. |
| 299 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
| 300 |
SCSI subsystem initialized |
| 301 |
usbcore: registered new driver usbfs |
| 302 |
usbcore: registered new driver hub |
| 303 |
PCI: Probing PCI hardware |
| 304 |
PCI: Probing PCI hardware (bus 00) |
| 305 |
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 |
| 306 |
PCI: Transparent bridge - 0000:00:1e.0 |
| 307 |
PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0 |
| 308 |
PCI->APIC IRQ transform: (B0,I29,P0) -> 21 |
| 309 |
PCI->APIC IRQ transform: (B0,I29,P1) -> 22 |
| 310 |
PCI->APIC IRQ transform: (B0,I29,P2) -> 18 |
| 311 |
PCI->APIC IRQ transform: (B0,I29,P3) -> 23 |
| 312 |
PCI->APIC IRQ transform: (B0,I29,P0) -> 21 |
| 313 |
PCI->APIC IRQ transform: (B0,I31,P0) -> 16 |
| 314 |
PCI->APIC IRQ transform: (B0,I31,P2) -> 20 |
| 315 |
PCI->APIC IRQ transform: (B0,I31,P1) -> 17 |
| 316 |
PCI->APIC IRQ transform: (B2,I0,P0) -> 16 |
| 317 |
PCI->APIC IRQ transform: (B4,I2,P0) -> 18 |
| 318 |
PCI->APIC IRQ transform: (B4,I2,P1) -> 19 |
| 319 |
Simple Boot Flag at 0x7a set to 0x1 |
| 320 |
Starting balanced_irq |
| 321 |
highmem bounce pool size: 64 pages |
| 322 |
devfs: 2004-01-31 Richard Gooch (rgooch@××××××××××.au) |
| 323 |
devfs: boot_options: 0x0 |
| 324 |
SGI XFS with ACLs, security attributes, realtime, large block numbers, |
| 325 |
no debug enabled |
| 326 |
SGI XFS Quota Management subsystem |
| 327 |
Initializing Cryptographic API |
| 328 |
inotify init: minor=63 |
| 329 |
vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, size 3072k |
| 330 |
vesafb: mode is 1024x768x16, linelength=2048, pages=4 |
| 331 |
vesafb: protected mode interface info at 00ff:44f0 |
| 332 |
vesafb: scrolling: redraw |
| 333 |
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 |
| 334 |
Console: switching to colour frame buffer device 128x48 |
| 335 |
fbsplash: console 0 using theme 'livecd-2004.3' |
| 336 |
fbsplash: switched splash state to 'on' on console 0 |
| 337 |
fb0: VESA VGA frame buffer device |
| 338 |
isapnp: Scanning for PnP cards... |
| 339 |
isapnp: No Plug & Play device found |
| 340 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 341 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 342 |
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled |
| 343 |
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 344 |
mice: PS/2 mouse device common for all mice |
| 345 |
input: AT Translated Set 2 keyboard on isa0060/serio0 |
| 346 |
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize |
| 347 |
loop: loaded (max 8 devices) |
| 348 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
| 349 |
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
| 350 |
ICH6: IDE controller at PCI slot 0000:00:1f.1 |
| 351 |
ICH6: chipset revision 3 |
| 352 |
ICH6: not 100% native mode: will probe irqs later |
| 353 |
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio |
| 354 |
Probing IDE interface ide0... |
| 355 |
hda: LITE-ON CD-ROM LTN-489S, ATAPI CD/DVD-ROM drive |
| 356 |
Using deadline io scheduler |
| 357 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
| 358 |
Probing IDE interface ide1... |
| 359 |
ide1: Wait for ready failed before probe ! |
| 360 |
Probing IDE interface ide2... |
| 361 |
ide2: Wait for ready failed before probe ! |
| 362 |
Probing IDE interface ide3... |
| 363 |
ide3: Wait for ready failed before probe ! |
| 364 |
Probing IDE interface ide4... |
| 365 |
ide4: Wait for ready failed before probe ! |
| 366 |
Probing IDE interface ide5... |
| 367 |
ide5: Wait for ready failed before probe ! |
| 368 |
hda: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33) |
| 369 |
Uniform CD-ROM driver Revision: 3.20 |
| 370 |
usbcore: registered new driver hiddev |
| 371 |
usbcore: registered new driver usbhid |
| 372 |
drivers/usb/input/hid-core.c: v2.0:USB HID core driver |
| 373 |
CAPI Subsystem Rev 1.1.2.8 |
| 374 |
EISA: Probing bus 0 at eisa0 |
| 375 |
EISA: Detected 0 cards. |
| 376 |
NET: Registered protocol family 2 |
| 377 |
IP: routing cache hash table of 8192 buckets, 64Kbytes |
| 378 |
TCP: Hash tables configured (established 262144 bind 65536) |
| 379 |
NET: Registered protocol family 1 |
| 380 |
NET: Registered protocol family 17 |
| 381 |
RAMDISK: Compressed image found at block 0 |
| 382 |
VFS: Mounted root (ext2 filesystem) readonly. |
| 383 |
Freeing unused kernel memory: 576k freed |
| 384 |
EXT2-fs warning: checktime reached, running e2fsck is recommended |
| 385 |
ehci_hcd 0000:00:1d.7: EHCI Host Controller |
| 386 |
PCI: Setting latency timer of device 0000:00:1d.7 to 64 |
| 387 |
ehci_hcd 0000:00:1d.7: irq 21, pci mem f881c800 |
| 388 |
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 |
| 389 |
PCI: cache line size of 128 is not supported by device 0000:00:1d.7 |
| 390 |
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 |
| 391 |
hub 1-0:1.0: USB hub found |
| 392 |
hub 1-0:1.0: 8 ports detected |
| 393 |
Initializing USB Mass Storage driver... |
| 394 |
usbcore: registered new driver usb-storage |
| 395 |
USB Mass Storage support registered. |
| 396 |
USB Universal Host Controller Interface driver v2.2 |
| 397 |
uhci_hcd 0000:00:1d.0: UHCI Host Controller |
| 398 |
PCI: Setting latency timer of device 0000:00:1d.0 to 64 |
| 399 |
uhci_hcd 0000:00:1d.0: irq 21, io base 0000ff80 |
| 400 |
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| 401 |
hub 2-0:1.0: USB hub found |
| 402 |
hub 2-0:1.0: 2 ports detected |
| 403 |
uhci_hcd 0000:00:1d.1: UHCI Host Controller |
| 404 |
PCI: Setting latency timer of device 0000:00:1d.1 to 64 |
| 405 |
uhci_hcd 0000:00:1d.1: irq 22, io base 0000ff60 |
| 406 |
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 |
| 407 |
hub 3-0:1.0: USB hub found |
| 408 |
hub 3-0:1.0: 2 ports detected |
| 409 |
uhci_hcd 0000:00:1d.2: UHCI Host Controller |
| 410 |
PCI: Setting latency timer of device 0000:00:1d.2 to 64 |
| 411 |
uhci_hcd 0000:00:1d.2: irq 18, io base 0000ff40 |
| 412 |
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 |
| 413 |
hub 4-0:1.0: USB hub found |
| 414 |
hub 4-0:1.0: 2 ports detected |
| 415 |
uhci_hcd 0000:00:1d.3: UHCI Host Controller |
| 416 |
PCI: Setting latency timer of device 0000:00:1d.3 to 64 |
| 417 |
uhci_hcd 0000:00:1d.3: irq 23, io base 0000ff20 |
| 418 |
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 |
| 419 |
hub 5-0:1.0: USB hub found |
| 420 |
hub 5-0:1.0: 2 ports detected |
| 421 |
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
| 422 |
ieee1394: Initialized config rom entry `ip1394' |
| 423 |
sbp2: $Rev: 1219 $ Ben Collins <bcollins@××××××.org> |
| 424 |
ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find |
| 425 |
reiserfs on hda |
| 426 |
VFS: Can't find ext3 filesystem on dev hda. |
| 427 |
VFS: Can't find ext2 filesystem on dev hda. |
| 428 |
SQUASHFS error: Can't find a SQUASHFS superblock on hda |
| 429 |
FAT: bogus number of reserved sectors |
| 430 |
VFS: Can't find a valid FAT filesystem on dev hda. |
| 431 |
ISO 9660 Extensions: Microsoft Joliet Level 3 |
| 432 |
ISO 9660 Extensions: RRIP_1991A |
| 433 |
fbsplash: switching to verbose mode |
| 434 |
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] |
| 435 |
parport0: irq 7 detected |
| 436 |
tg3.c:v3.10 (September 14, 2004) |
| 437 |
PCI: Setting latency timer of device 0000:02:00.0 to 64 |
| 438 |
eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCIX:100MHz:32-bit) |
| 439 |
10/100/1000BaseT Ethernet 00:13:20:55:70:f5 |
| 440 |
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] |
| 441 |
TSOcap[1] |
| 442 |
kobject_register failed for aic79xx (-17) |
| 443 |
[<c023ecb7>] |
| 444 |
[<c029db4f>] |
| 445 |
[<c029dfba>] |
| 446 |
[<c0246e95>] |
| 447 |
[<f8dab39e>] |
| 448 |
[<f8da5553>] |
| 449 |
[<f882c00a>] |
| 450 |
[<c012ab57>] |
| 451 |
[<c01050e7>] |
| 452 |
libata version 1.02 loaded. |
| 453 |
Unable to handle kernel paging request at virtual address f8dbccbc |
| 454 |
printing eip: |
| 455 |
c023ec2d |
| 456 |
*pde = 1ffe9067 |
| 457 |
*pte = 00000000 |
| 458 |
Oops: 0002 [#1] |
| 459 |
SMP |
| 460 |
Modules linked in: ata_piix libata evdev tg3 parport_pc parport sbp2 |
| 461 |
ohci1394 ieee1394 ohci_hcd uhci_hcd usb_storage ehci_hcd |
| 462 |
CPU: 1 |
| 463 |
EIP: 0060:[<c023ec2d>] Not tainted VLI |
| 464 |
EFLAGS: 00010292 (2.6.9-gentoo-r1) |
| 465 |
eax: c03a3b64 ebx: f887e220 ecx: f8dbccbc edx: f887e23c |
| 466 |
esi: c03a3b6c edi: f887e204 ebp: 00000000 esp: f7843f50 |
| 467 |
ds: 007b es: 007b ss: 0068 |
| 468 |
Process modprobe (pid: 3345, threadinfo=f7842000 task=c1a68ef0) |
| 469 |
Stack: f887e220 ffffffea f887e204 c023ec9d f887e220 f887e220 f887e220 |
| 470 |
c03a3b00 |
| 471 |
c029db4f f887e220 f887e1e0 00000000 f887e280 f7842000 c029dfba |
| 472 |
f887e204 |
| 473 |
c0246e95 f887e204 c0399560 f887e460 c0399544 f882c00a f887e1e0 |
| 474 |
c012ab57 |
| 475 |
Call Trace: |
| 476 |
[<c023ec9d>] |
| 477 |
[<c029db4f>] |
| 478 |
[<c029dfba>] |
| 479 |
[<c0246e95>] |
| 480 |
[<f882c00a>] |
| 481 |
[<c012ab57>] |
| 482 |
[<c01050e7>] |
| 483 |
Code: 0f 85 1a 04 00 00 85 f6 75 0f 8b 43 28 83 c0 10 50 e8 98 01 00 00 |
| 484 |
89 c6 58 8b 43 28 83 c0 08 8b 48 04 8d 53 1c 89 43 1c 89 50 04 <89> 11 |
| 485 |
89 4a 04 8b 43 28 8b 38 8d 4f 48 89 c8 ba ff ff 00 00 f0 |
| 486 |
<6>fbsplash: console 11 using theme 'livecd-2004.3' |
| 487 |
fbsplash: switched splash state to 'on' on console 11 |
| 488 |
tg3: eth0: Link is up at 100 Mbps, full duplex. |
| 489 |
tg3: eth0: Flow control is on for TX and on for RX. |
| 490 |
tg3: eth0: Link is up at 100 Mbps, full duplex. |
| 491 |
tg3: eth0: Flow control is on for TX and on for RX. |
| 492 |
NET: Registered protocol family 10 |
| 493 |
Disabled Privacy Extensions on device c03b1220(lo) |
| 494 |
IPv6 over IPv4 tunneling driver |
| 495 |
eth0: no IPv6 routers present |
| 496 |
aacraid: falsely claims to have parameter commit |
| 497 |
Red Hat/Adaptec aacraid driver (1.1.2-lk2 Nov 25 2004) |
| 498 |
|
| 499 |
|
| 500 |
-- |
| 501 |
gentoo-user-es@g.o mailing list |
Archives