Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-user-es
Navigation:
Lists: gentoo-user-es: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: gentoo-user-es@g.o
From: pcmaster <pcmaster@...>
Subject: Re: gentoo en un poweredge sc420
Date: Fri, 30 Sep 2005 12:52:07 +0200
Hola,

En los mensajes que te muestra el sistema fíjate en un par de puntos:

El disco hda tiene un tamaño de sector de 2048 bytes. Eso es un CD. Los discos duros usan sectores de 512 bytes. Es posible que el Cd arranque con emulación de disco duro (si arrancase con emulación de disquet, sería de 1,44 MB y sería reconocido como disquetera, pero en eun disquet de 1,44 Mb creo que no cabe un kernel 2.6).

Si te fijas en los módulos que tienes cargados, uno de ellos es libata, es decir, que ha detectado una conteroladora SATA. Si el disco es SATA, será reconocido como disco SCSI, y el dispositivo será /dev/sda (o /dev/sdb, /dev/sdc, etc).

¿Tienes conectado algún disco Firewire? Fíjate que tienes cargado el módulo sbp2 (soporte para discos duros USB 2.0 y Firewire) que utiliza el módulo IEEE1394. Si no tiene sningún disco Firewire, intenta descargarlos.

Fíjate tambien que tienes cargados los módulos SATA:

ata_piix                5574  1
libata                 25316  1 ata_piix

libata es el soporte SATA, y ata_piix el "driver" para el chipset de Intel.

Intenta descargarlos y volverlos a cargar, a ver qué pasa.

En la BIOS del PC puedes seleccionar dos modos para el interfaz SATA: el nativo SATA y un segundo modo de "compatibilidad" en el cual emula un puerto PATA. Si uno no te funciona por algún motivo prueba el otro, aunque en modo nativo debería dar mejor rendimiento.

Por último, si has intantado hacer RAID desde la BIOS, comprueba si ese RAID es por software o hardware. Si lo hace por hard el chip SATA. ningún problema, pero si es por software, necesita drivers "windoseros" y no funcionara en Linux. En ese caso es mejor desactivar el RAID.

Saludos

On Thu, 29 Sep 2005 23:56:02 +0200
d2clon <d2clon@...> escribió:

> hola gente:
> 
> estaba yo tan contento que habíamos comprado un dell para ponerlo como 
> servidor y jubilar ya el piii que se queda un poco dormido..
> 
> entonces les digo a mis compis que me inserten el livecd y me den acceso 
> por red.. para ver si empezaba a instalarle algo.. ya sabeis "empezar es 
> tener la mitad del trabajo hecho"
> 
> pero me pego la primera en la frente..
> no consigo activar el disco duro.. ñññeee
> 
> no encuentro nada en el /dev/ a lo que hacerle un fdisk..
> si que hay un /dev/hda pero solo tiene 52megas.. creo que es un invento 
> del liveCd.. o no lo entiendo: [1]
> 
> 
> estoy seguro que es cargar algún módulo pero no sé cual..
> mi esperiencia con otros DELL con discos duros SCSI tambien era activar 
> el módulo 'aacraid'
> 
> pero se me ha quedado pillado en el 'modprobe' aunque parece que lo ha 
> levantado.. no se corta ni con ctrl+c ni con kill -9..
> 
> he intentado levantar otros módulos mirando los help de los módulos del 
> kernel:
> # modprobe scsi_mod
> FATAL: Module scsi_mod not found.
> # modprobe sg
> este no da error.. pero nadie lo usa
> 
> he encontrado esto en google:
> http://www.linuxquestions.org/questions/archive/47/2005/03/1/262404
> pero no veo que me ayude a activar mi disco.
> 
> 
> aquí adjunto todos los datos que puedo recopilar a ver si a alguien se 
> le ocurre alguna sugerencia.
> 
> gracias
> d2clon
> 
> [1]-------
> livecd root # fdisk /dev/hda
> You will not be able to write the partition table.
> Note: sector size is 2048 (not 512)
> Device contains neither a valid DOS partition table, nor Sun, SGI or OSF 
> disklabel
> Building a new DOS disklabel. Changes will remain in memory only,
> until you decide to write them. After that, of course, the previous
> content won't be recoverable.
> 
> Warning: invalid flag 0x0000 of partition table 4 will be corrected by 
> w(rite)
> 
> Command (m for help): p
> 
> Disk /dev/hda: 52 MB, 52992000 bytes
> 255 heads, 63 sectors/track, 1 cylinders
> Units = cylinders of 16065 * 2048 = 32901120 bytes
> 
>     Device Boot      Start         End      Blocks   Id  System
> 
> 
> ==lsmod=====================================
> Module                  Size  Used by
> aacraid                31463  1
> ipv6                  182560  12
> ata_piix                5574  1
> libata                 25316  1 ata_piix
> evdev                   6464  0
> tg3                    65860  0
> parport_pc             27072  0
> parport                22728  1 parport_pc
> sbp2                   16744  0
> ohci1394               24836  0
> ieee1394               62008  2 sbp2,ohci1394
> ohci_hcd               15044  0
> uhci_hcd               23152  0
> usb_storage            46208  0
> ehci_hcd               21028  0
> 
> == lspci ==========================
> (fijaos que no sale ningún dispositivo SCSI.. a ver si va a ser que no 
> está enchufado el disco duro o algo)
> 
> 0000:00:00.0 Host bridge: Intel Corp.: Unknown device 2588 (rev 04)
> 0000:00:01.0 PCI bridge: Intel Corp.: Unknown device 2589 (rev 04)
> 0000:00:02.0 VGA compatible controller: Intel Corp.: Unknown device 258a 
> (rev 04)
> 0000:00:1c.0 PCI bridge: Intel Corp.: Unknown device 2660 (rev 03)
> 0000:00:1c.1 PCI bridge: Intel Corp.: Unknown device 2662 (rev 03)
> 0000:00:1d.0 USB Controller: Intel Corp.: Unknown device 2658 (rev 03)
> 0000:00:1d.1 USB Controller: Intel Corp.: Unknown device 2659 (rev 03)
> 0000:00:1d.2 USB Controller: Intel Corp.: Unknown device 265a (rev 03)
> 0000:00:1d.3 USB Controller: Intel Corp.: Unknown device 265b (rev 03)
> 0000:00:1d.7 USB Controller: Intel Corp.: Unknown device 265c (rev 03)
> 0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev d3)
> 0000:00:1f.0 ISA bridge: Intel Corp.: Unknown device 2640 (rev 03)
> 0000:00:1f.1 IDE interface: Intel Corp.: Unknown device 266f (rev 03)
> 0000:00:1f.2 IDE interface: Intel Corp.: Unknown device 2652 (rev 03)
> 0000:00:1f.3 SMBus: Intel Corp.: Unknown device 266a (rev 03)
> 0000:02:00.0 Ethernet controller: Broadcom Corporation: Unknown device 
> 1677 (rev 01)
> 0000:04:02.0 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID 
> (rev 10)
> 0000:04:02.1 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID 
> (rev 10)
> 
> == ls -l /dev/ ==============
> (quitando todos lo "tty" que había mogollón)
> (si os fijais hay un hda.. pero solo tiene 52 megas.. creo que es un 
> invento del liveCd)
> total 0
> lrwxrwxrwx  1 root root       8 Sep 28 19:42 cdrom -> /dev/hda
> drwxr-xr-x  2 root root       0 Sep 28 19:41 cdroms
> lrwxrwxrwx  1 root root      11 Sep 28 19:41 core -> /proc/kcore
> drwxr-xr-x  2 root root       0 Sep 28 19:41 fb
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 fb0 -> fb/0
> crw-rw----  1 root root  10, 62 Sep 28 19:41 fbsplash
> lrwxrwxrwx  1 root root      13 Sep 28 19:41 fd -> /proc/self/fd
> crw-rw-rw-  1 root root   1,  7 Sep 28 19:41 full
> brw-rw----  1 root cdrom  3,  0 Sep 28 19:41 hda
> drwxr-xr-x  3 root root       0 Sep 28 19:41 ide
> prw-------  1 root root       0 Sep 28 19:42 initctl
> crw-rw----  1 root root  10, 63 Sep 28 19:41 inotify
> drwxr-xr-x  2 root root       0 Sep 28 19:41 input
> crw-r-----  1 root kmem   1,  2 Sep 28 19:41 kmem
> crw-rw----  1 root root   1, 11 Sep 28 19:41 kmsg
> srw-rw-rw-  1 root root       0 Sep 28 19:42 log
> drwxr-xr-x  2 root root       0 Sep 28 19:41 loop
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop0 -> loop/0
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop1 -> loop/1
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop2 -> loop/2
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop3 -> loop/3
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop4 -> loop/4
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop5 -> loop/5
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop6 -> loop/6
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop7 -> loop/7
> crw-r-----  1 root kmem   1,  1 Sep 28 19:41 mem
> crw-rw-rw-  1 root root   1,  3 Sep 28 19:41 null
> crw-r-----  1 root kmem   1,  4 Sep 28 19:41 port
> drwxr-xr-x  2 root root       0 Sep 28 19:41 pts
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram0 -> rd/0
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram1 -> rd/1
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram10 -> rd/10
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram11 -> rd/11
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram12 -> rd/12
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram13 -> rd/13
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram14 -> rd/14
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram15 -> rd/15
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram2 -> rd/2
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram3 -> rd/3
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram4 -> rd/4
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram5 -> rd/5
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram6 -> rd/6
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram7 -> rd/7
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram8 -> rd/8
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram9 -> rd/9
> crw-rw-rw-  1 root root   1,  8 Sep 28 19:41 random
> drwxr-xr-x  2 root root       0 Sep 28 19:41 rd
> drwxrwxrwt  2 root root      40 Sep 28 19:41 shm
> lrwxrwxrwx  1 root root      24 Sep 28 19:41 sndstat -> 
> /proc/asound/oss/sndstat
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 stderr -> fd/2
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 stdin -> fd/0
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 stdout -> fd/1
> drwxr-xr-x  2 root root       0 Sep 28 19:41 tts
> cr--r--r--  1 root root   1,  9 Sep 28 19:41 urandom
> drwxr-xr-x  2 root root       0 Sep 28 19:41 vc
> drwxr-xr-x  2 root root       0 Sep 28 19:42 vcc
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 vcs -> vcc/0
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs1 -> vcc/1
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcs12 -> vcc/12
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs2 -> vcc/2
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs3 -> vcc/3
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs4 -> vcc/4
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs5 -> vcc/5
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs6 -> vcc/6
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 vcsa -> vcc/a0
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa1 -> vcc/a1
> lrwxrwxrwx  1 root root       7 Sep 28 19:42 vcsa12 -> vcc/a12
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa2 -> vcc/a2
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa3 -> vcc/a3
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa4 -> vcc/a4
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa5 -> vcc/a5
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa6 -> vcc/a6
> crw-rw-rw-  1 root root   1,  5 Sep 28 19:41 zero
> 
> 
> ===dmesg=========
> Linux version 2.6.9-gentoo-r1 (root@inertia) (gcc version 3.3.4 20040623 
> (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 SMP Thu Nov 25 
> 03:24:02 UTC 2004
> BIOS-provided physical RAM map:
>   BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>   BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>   BIOS-e820: 0000000000100000 - 000000003f68cc00 (usable)
>   BIOS-e820: 000000003f68cc00 - 000000003f68ec00 (ACPI NVS)
>   BIOS-e820: 000000003f68ec00 - 000000003f690c00 (ACPI data)
>   BIOS-e820: 000000003f690c00 - 0000000040000000 (reserved)
>   BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>   BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
>   BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
>   BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
>   BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> 118MB HIGHMEM available.
> 896MB LOWMEM available.
> found SMP MP-table at 000fe710
> On node 0 totalpages: 259724
>    DMA zone: 4096 pages, LIFO batch:1
>    Normal zone: 225280 pages, LIFO batch:16
>    HighMem zone: 30348 pages, LIFO batch:7
> DMI 2.3 present.
> ACPI: RSDP (v000 DELL                                  ) @ 0x000fec00
> ACPI: RSDT (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fcc8f
> ACPI: FADT (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fcccb
> ACPI: SSDT (v001   DELL    st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd0e5e
> ACPI: MADT (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fcd3f
> ACPI: BOOT (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fcdb1
> ACPI: MCFG (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fcdd9
> ACPI: HPET (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fce17
> ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 15:4 APIC version 20
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1 15:4 APIC version 20
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
> Using ACPI for processor (LAPIC) configuration information
> Intel MultiProcessor Specification v1.4
>      Virtual Wire compatibility mode.
> OEM ID: DELL     Product ID: PE SC420     APIC at: 0xFEE00000
> I/O APIC #8 Version 32 at 0xFEC00000.
> Enabling APIC mode:  Flat.  Using 1 I/O APICs
> Processors: 2
> Built 1 zonelists
> Kernel command line: initrd=gentoo.igz root=/dev/ram0 init=/linuxrc 
> acpi=ht looptype=squashfs loop=/livecd.squashfs udev nodevfs cdroot 
> vga=791 dokeymap splash=silent,theme:livecd-2004.3 BOOT_IMAGE=gentoo
> fbsplash: silent
> fbsplash: theme livecd-2004.3
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 65536 bytes)
> Detected 2794.605 MHz processor.
> Using tsc for high-res timesource
> Speakup v-2.00 CVS: Wed Oct 20 14:26:13 EDT 2004 : initialized
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 1023644k/1038896k available (2296k kernel code, 14560k reserved, 
> 536k data, 576k init, 121392k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay loop... 5505.02 BogoMIPS (lpj=2752512)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> Couldn't initialize miscdevice /dev/synth.
> CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000
> CPU: After vendor identify, caps:  bfebfbff 00100000 00000000 00000000
> monitor/mwait feature present.
> using mwait in idle threads.
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: After all inits, caps:        bfebfbff 00100000 00000000 00000080
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
> per-CPU timeslice cutoff: 2926.23 usecs.
> task migration cache decay timeout: 3 msecs.
> Booting processor 1/1 eip 2000
> Initializing CPU#1
> Calibrating delay loop... 5570.56 BogoMIPS (lpj=2785280)
> CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000
> CPU: After vendor identify, caps:  bfebfbff 00100000 00000000 00000000
> monitor/mwait feature present.
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: After all inits, caps:        bfebfbff 00100000 00000000 00000080
> CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
> Total of 2 processors activated (11075.58 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 pin1=2 pin2=0
> checking TSC synchronization across 2 CPUs: passed.
> Brought up 2 CPUs
> checking if image is initramfs...it isn't (no cpio magic); looks like an 
> initrd
> Freeing initrd memory: 1615k freed
> NET: Registered protocol family 16
> EISA bus registered
> PCI: PCI BIOS revision 2.10 entry at 0xfb34b, last bus=4
> PCI: Using MMCONFIG
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040816
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> SCSI subsystem initialized
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> PCI: Transparent bridge - 0000:00:1e.0
> PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0
> PCI->APIC IRQ transform: (B0,I29,P0) -> 21
> PCI->APIC IRQ transform: (B0,I29,P1) -> 22
> PCI->APIC IRQ transform: (B0,I29,P2) -> 18
> PCI->APIC IRQ transform: (B0,I29,P3) -> 23
> PCI->APIC IRQ transform: (B0,I29,P0) -> 21
> PCI->APIC IRQ transform: (B0,I31,P0) -> 16
> PCI->APIC IRQ transform: (B0,I31,P2) -> 20
> PCI->APIC IRQ transform: (B0,I31,P1) -> 17
> PCI->APIC IRQ transform: (B2,I0,P0) -> 16
> PCI->APIC IRQ transform: (B4,I2,P0) -> 18
> PCI->APIC IRQ transform: (B4,I2,P1) -> 19
> Simple Boot Flag at 0x7a set to 0x1
> Starting balanced_irq
> highmem bounce pool size: 64 pages
> devfs: 2004-01-31 Richard Gooch (rgooch@...)
> devfs: boot_options: 0x0
> SGI XFS with ACLs, security attributes, realtime, large block numbers, 
> no debug enabled
> SGI XFS Quota Management subsystem
> Initializing Cryptographic API
> inotify init: minor=63
> vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, size 3072k
> vesafb: mode is 1024x768x16, linelength=2048, pages=4
> vesafb: protected mode interface info at 00ff:44f0
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 128x48
> fbsplash: console 0 using theme 'livecd-2004.3'
> fbsplash: switched splash state to 'on' on console 0
> fb0: VESA VGA frame buffer device
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard on isa0060/serio0
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> loop: loaded (max 8 devices)
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ICH6: IDE controller at PCI slot 0000:00:1f.1
> ICH6: chipset revision 3
> ICH6: not 100% native mode: will probe irqs later
>      ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> Probing IDE interface ide0...
> hda: LITE-ON CD-ROM LTN-489S, ATAPI CD/DVD-ROM drive
> Using deadline io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> ide1: Wait for ready failed before probe !
> Probing IDE interface ide2...
> ide2: Wait for ready failed before probe !
> Probing IDE interface ide3...
> ide3: Wait for ready failed before probe !
> Probing IDE interface ide4...
> ide4: Wait for ready failed before probe !
> Probing IDE interface ide5...
> ide5: Wait for ready failed before probe !
> hda: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> CAPI Subsystem Rev 1.1.2.8
> EISA: Probing bus 0 at eisa0
> EISA: Detected 0 cards.
> NET: Registered protocol family 2
> IP: routing cache hash table of 8192 buckets, 64Kbytes
> TCP: Hash tables configured (established 262144 bind 65536)
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 576k freed
> EXT2-fs warning: checktime reached, running e2fsck is recommended
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: irq 21, pci mem f881c800
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> USB Universal Host Controller Interface driver v2.2
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: irq 21, io base 0000ff80
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: irq 22, io base 0000ff60
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: irq 18, io base 0000ff40
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: irq 23, io base 0000ff20
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ieee1394: Initialized config rom entry `ip1394'
> sbp2: $Rev: 1219 $ Ben Collins <bcollins@...>
> ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find 
> reiserfs on hda
> VFS: Can't find ext3 filesystem on dev hda.
> VFS: Can't find ext2 filesystem on dev hda.
> SQUASHFS error: Can't find a SQUASHFS superblock on hda
> FAT: bogus number of reserved sectors
> VFS: Can't find a valid FAT filesystem on dev hda.
> ISO 9660 Extensions: Microsoft Joliet Level 3
> ISO 9660 Extensions: RRIP_1991A
> fbsplash: switching to verbose mode
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
> parport0: irq 7 detected
> tg3.c:v3.10 (September 14, 2004)
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCIX:100MHz:32-bit) 
> 10/100/1000BaseT Ethernet 00:13:20:55:70:f5
> eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] 
> TSOcap[1]
> kobject_register failed for aic79xx (-17)
>   [<c023ecb7>]
>   [<c029db4f>]
>   [<c029dfba>]
>   [<c0246e95>]
>   [<f8dab39e>]
>   [<f8da5553>]
>   [<f882c00a>]
>   [<c012ab57>]
>   [<c01050e7>]
> libata version 1.02 loaded.
> Unable to handle kernel paging request at virtual address f8dbccbc
>   printing eip:
> c023ec2d
> *pde = 1ffe9067
> *pte = 00000000
> Oops: 0002 [#1]
> SMP
> Modules linked in: ata_piix libata evdev tg3 parport_pc parport sbp2 
> ohci1394 ieee1394 ohci_hcd uhci_hcd usb_storage ehci_hcd
> CPU:    1
> EIP:    0060:[<c023ec2d>]    Not tainted VLI
> EFLAGS: 00010292   (2.6.9-gentoo-r1)
> eax: c03a3b64   ebx: f887e220   ecx: f8dbccbc   edx: f887e23c
> esi: c03a3b6c   edi: f887e204   ebp: 00000000   esp: f7843f50
> ds: 007b   es: 007b   ss: 0068
> Process modprobe (pid: 3345, threadinfo=f7842000 task=c1a68ef0)
> Stack: f887e220 ffffffea f887e204 c023ec9d f887e220 f887e220 f887e220 
> c03a3b00
>         c029db4f f887e220 f887e1e0 00000000 f887e280 f7842000 c029dfba 
> f887e204
>         c0246e95 f887e204 c0399560 f887e460 c0399544 f882c00a f887e1e0 
> c012ab57
> Call Trace:
>   [<c023ec9d>]
>   [<c029db4f>]
>   [<c029dfba>]
>   [<c0246e95>]
>   [<f882c00a>]
>   [<c012ab57>]
>   [<c01050e7>]
> Code: 0f 85 1a 04 00 00 85 f6 75 0f 8b 43 28 83 c0 10 50 e8 98 01 00 00 
> 89 c6 58 8b 43 28 83 c0 08 8b 48 04 8d 53 1c 89 43 1c 89 50 04 <89> 11 
> 89 4a 04 8b 43 28 8b 38 8d 4f 48 89 c8 ba ff ff 00 00 f0
>   <6>fbsplash: console 11 using theme 'livecd-2004.3'
> fbsplash: switched splash state to 'on' on console 11
> tg3: eth0: Link is up at 100 Mbps, full duplex.
> tg3: eth0: Flow control is on for TX and on for RX.
> tg3: eth0: Link is up at 100 Mbps, full duplex.
> tg3: eth0: Flow control is on for TX and on for RX.
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c03b1220(lo)
> IPv6 over IPv4 tunneling driver
> eth0: no IPv6 routers present
> aacraid: falsely claims to have parameter commit
> Red Hat/Adaptec aacraid driver (1.1.2-lk2 Nov 25 2004)
> 
> 
> -- 
> gentoo-user-es@g.o mailing list
> 

-- 
gentoo-user-es@g.o mailing list


References:
gentoo en un poweredge sc420
-- d2clon
Navigation:
Lists: gentoo-user-es: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
Re: gentoo en un poweredge sc420
Next by thread:
Re: gentoo en un poweredge sc420
Previous by date:
Re: gentoo en un poweredge sc420
Next by date:
Re: gentoo en un poweredge sc420


Updated Oct 31, 2011

Summary: Archive of the gentoo-user-es mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.