Re: [gentoo-user-es] gentoo en un poweredge sc420

[José Zamora]

Saludos.

Hola me parecio ver que estas iniciando con el cd livecd-2004.3 ¿ Esto
es verdad? ¿ Por que no instalas 2005.1 ?.

Por el link que envias tu máquina usa discos sata por lo que tendrias
que colocar.

#cfdisk /dev/sda
o
#fdisk /dev/sda

Bueno espero esto funcione.

atte:
José Zamora.

d2clon wrote:

> hola gente:
>
> estaba yo tan contento que habíamos comprado un dell para ponerlo como
> servidor y jubilar ya el piii que se queda un poco dormido..
>
> entonces les digo a mis compis que me inserten el livecd y me den
> acceso por red.. para ver si empezaba a instalarle algo.. ya sabeis
> "empezar es tener la mitad del trabajo hecho"
>
> pero me pego la primera en la frente..
> no consigo activar el disco duro.. ñññeee
>
> no encuentro nada en el /dev/ a lo que hacerle un fdisk..
> si que hay un /dev/hda pero solo tiene 52megas.. creo que es un
> invento del liveCd.. o no lo entiendo: [1]
>
>
> estoy seguro que es cargar algún módulo pero no sé cual..
> mi esperiencia con otros DELL con discos duros SCSI tambien era
> activar el módulo 'aacraid'
>
> pero se me ha quedado pillado en el 'modprobe' aunque parece que lo ha
> levantado.. no se corta ni con ctrl+c ni con kill -9..
>
> he intentado levantar otros módulos mirando los help de los módulos
> del kernel:
> # modprobe scsi_mod
> FATAL: Module scsi_mod not found.
> # modprobe sg
> este no da error.. pero nadie lo usa
>
> he encontrado esto en google:
> http://www.linuxquestions.org/questions/archive/47/2005/03/1/262404
> pero no veo que me ayude a activar mi disco.
>
>
> aquí adjunto todos los datos que puedo recopilar a ver si a alguien se
> le ocurre alguna sugerencia.
>
> gracias
> d2clon
>
> [1]-------
> livecd root # fdisk /dev/hda
> You will not be able to write the partition table.
> Note: sector size is 2048 (not 512)
> Device contains neither a valid DOS partition table, nor Sun, SGI or
> OSF disklabel
> Building a new DOS disklabel. Changes will remain in memory only,
> until you decide to write them. After that, of course, the previous
> content won't be recoverable.
>
> Warning: invalid flag 0x0000 of partition table 4 will be corrected by
> w(rite)
>
> Command (m for help): p
>
> Disk /dev/hda: 52 MB, 52992000 bytes
> 255 heads, 63 sectors/track, 1 cylinders
> Units = cylinders of 16065 * 2048 = 32901120 bytes
>
>    Device Boot      Start         End      Blocks   Id  System
>
>
> ==lsmod=====================================
> Module                  Size  Used by
> aacraid                31463  1
> ipv6                  182560  12
> ata_piix                5574  1
> libata                 25316  1 ata_piix
> evdev                   6464  0
> tg3                    65860  0
> parport_pc             27072  0
> parport                22728  1 parport_pc
> sbp2                   16744  0
> ohci1394               24836  0
> ieee1394               62008  2 sbp2,ohci1394
> ohci_hcd               15044  0
> uhci_hcd               23152  0
> usb_storage            46208  0
> ehci_hcd               21028  0
>
> == lspci ==========================
> (fijaos que no sale ningún dispositivo SCSI.. a ver si va a ser que no
> está enchufado el disco duro o algo)
>
> 0000:00:00.0 Host bridge: Intel Corp.: Unknown device 2588 (rev 04)
> 0000:00:01.0 PCI bridge: Intel Corp.: Unknown device 2589 (rev 04)
> 0000:00:02.0 VGA compatible controller: Intel Corp.: Unknown device
> 258a (rev 04)
> 0000:00:1c.0 PCI bridge: Intel Corp.: Unknown device 2660 (rev 03)
> 0000:00:1c.1 PCI bridge: Intel Corp.: Unknown device 2662 (rev 03)
> 0000:00:1d.0 USB Controller: Intel Corp.: Unknown device 2658 (rev 03)
> 0000:00:1d.1 USB Controller: Intel Corp.: Unknown device 2659 (rev 03)
> 0000:00:1d.2 USB Controller: Intel Corp.: Unknown device 265a (rev 03)
> 0000:00:1d.3 USB Controller: Intel Corp.: Unknown device 265b (rev 03)
> 0000:00:1d.7 USB Controller: Intel Corp.: Unknown device 265c (rev 03)
> 0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev d3)
> 0000:00:1f.0 ISA bridge: Intel Corp.: Unknown device 2640 (rev 03)
> 0000:00:1f.1 IDE interface: Intel Corp.: Unknown device 266f (rev 03)
> 0000:00:1f.2 IDE interface: Intel Corp.: Unknown device 2652 (rev 03)
> 0000:00:1f.3 SMBus: Intel Corp.: Unknown device 266a (rev 03)
> 0000:02:00.0 Ethernet controller: Broadcom Corporation: Unknown device
> 1677 (rev 01)
> 0000:04:02.0 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID
> (rev 10)
> 0000:04:02.1 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID
> (rev 10)
>
> == ls -l /dev/ ==============
> (quitando todos lo "tty" que había mogollón)
> (si os fijais hay un hda.. pero solo tiene 52 megas.. creo que es un
> invento del liveCd)
> total 0
> lrwxrwxrwx  1 root root       8 Sep 28 19:42 cdrom -> /dev/hda
> drwxr-xr-x  2 root root       0 Sep 28 19:41 cdroms
> lrwxrwxrwx  1 root root      11 Sep 28 19:41 core -> /proc/kcore
> drwxr-xr-x  2 root root       0 Sep 28 19:41 fb
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 fb0 -> fb/0
> crw-rw----  1 root root  10, 62 Sep 28 19:41 fbsplash
> lrwxrwxrwx  1 root root      13 Sep 28 19:41 fd -> /proc/self/fd
> crw-rw-rw-  1 root root   1,  7 Sep 28 19:41 full
> brw-rw----  1 root cdrom  3,  0 Sep 28 19:41 hda
> drwxr-xr-x  3 root root       0 Sep 28 19:41 ide
> prw-------  1 root root       0 Sep 28 19:42 initctl
> crw-rw----  1 root root  10, 63 Sep 28 19:41 inotify
> drwxr-xr-x  2 root root       0 Sep 28 19:41 input
> crw-r-----  1 root kmem   1,  2 Sep 28 19:41 kmem
> crw-rw----  1 root root   1, 11 Sep 28 19:41 kmsg
> srw-rw-rw-  1 root root       0 Sep 28 19:42 log
> drwxr-xr-x  2 root root       0 Sep 28 19:41 loop
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop0 -> loop/0
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop1 -> loop/1
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop2 -> loop/2
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop3 -> loop/3
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop4 -> loop/4
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop5 -> loop/5
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop6 -> loop/6
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 loop7 -> loop/7
> crw-r-----  1 root kmem   1,  1 Sep 28 19:41 mem
> crw-rw-rw-  1 root root   1,  3 Sep 28 19:41 null
> crw-r-----  1 root kmem   1,  4 Sep 28 19:41 port
> drwxr-xr-x  2 root root       0 Sep 28 19:41 pts
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram0 -> rd/0
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram1 -> rd/1
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram10 -> rd/10
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram11 -> rd/11
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram12 -> rd/12
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram13 -> rd/13
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram14 -> rd/14
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 ram15 -> rd/15
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram2 -> rd/2
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram3 -> rd/3
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram4 -> rd/4
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram5 -> rd/5
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram6 -> rd/6
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram7 -> rd/7
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram8 -> rd/8
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 ram9 -> rd/9
> crw-rw-rw-  1 root root   1,  8 Sep 28 19:41 random
> drwxr-xr-x  2 root root       0 Sep 28 19:41 rd
> drwxrwxrwt  2 root root      40 Sep 28 19:41 shm
> lrwxrwxrwx  1 root root      24 Sep 28 19:41 sndstat ->
> /proc/asound/oss/sndstat
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 stderr -> fd/2
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 stdin -> fd/0
> lrwxrwxrwx  1 root root       4 Sep 28 19:41 stdout -> fd/1
> drwxr-xr-x  2 root root       0 Sep 28 19:41 tts
> cr--r--r--  1 root root   1,  9 Sep 28 19:41 urandom
> drwxr-xr-x  2 root root       0 Sep 28 19:41 vc
> drwxr-xr-x  2 root root       0 Sep 28 19:42 vcc
> lrwxrwxrwx  1 root root       5 Sep 28 19:41 vcs -> vcc/0
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs1 -> vcc/1
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcs12 -> vcc/12
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs2 -> vcc/2
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs3 -> vcc/3
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs4 -> vcc/4
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs5 -> vcc/5
> lrwxrwxrwx  1 root root       5 Sep 28 19:42 vcs6 -> vcc/6
> lrwxrwxrwx  1 root root       6 Sep 28 19:41 vcsa -> vcc/a0
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa1 -> vcc/a1
> lrwxrwxrwx  1 root root       7 Sep 28 19:42 vcsa12 -> vcc/a12
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa2 -> vcc/a2
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa3 -> vcc/a3
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa4 -> vcc/a4
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa5 -> vcc/a5
> lrwxrwxrwx  1 root root       6 Sep 28 19:42 vcsa6 -> vcc/a6
> crw-rw-rw-  1 root root   1,  5 Sep 28 19:41 zero
>
>
> ===dmesg=========
> Linux version 2.6.9-gentoo-r1 (root@inertia) (gcc version 3.3.4
> 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 SMP Thu
> Nov 25 03:24:02 UTC 2004
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000003f68cc00 (usable)
>  BIOS-e820: 000000003f68cc00 - 000000003f68ec00 (ACPI NVS)
>  BIOS-e820: 000000003f68ec00 - 000000003f690c00 (ACPI data)
>  BIOS-e820: 000000003f690c00 - 0000000040000000 (reserved)
>  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
>  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
>  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
>  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> 118MB HIGHMEM available.
> 896MB LOWMEM available.
> found SMP MP-table at 000fe710
> On node 0 totalpages: 259724
>   DMA zone: 4096 pages, LIFO batch:1
>   Normal zone: 225280 pages, LIFO batch:16
>   HighMem zone: 30348 pages, LIFO batch:7
> DMI 2.3 present.
> ACPI: RSDP (v000 DELL                                  ) @ 0x000fec00
> ACPI: RSDT (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fcc8f
> ACPI: FADT (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fcccb
> ACPI: SSDT (v001   DELL    st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd0e5e
> ACPI: MADT (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fcd3f
> ACPI: BOOT (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fcdb1
> ACPI: MCFG (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fcdd9
> ACPI: HPET (v001 DELL    PESC420 0x00000007 ASL  0x00000061) @ 0x000fce17
> ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 15:4 APIC version 20
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1 15:4 APIC version 20
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
> Using ACPI for processor (LAPIC) configuration information
> Intel MultiProcessor Specification v1.4
>     Virtual Wire compatibility mode.
> OEM ID: DELL     Product ID: PE SC420     APIC at: 0xFEE00000
> I/O APIC #8 Version 32 at 0xFEC00000.
> Enabling APIC mode:  Flat.  Using 1 I/O APICs
> Processors: 2
> Built 1 zonelists
> Kernel command line: initrd=gentoo.igz root=/dev/ram0 init=/linuxrc
> acpi=ht looptype=squashfs loop=/livecd.squashfs udev nodevfs cdroot
> vga=791 dokeymap splash=silent,theme:livecd-2004.3 BOOT_IMAGE=gentoo
> fbsplash: silent
> fbsplash: theme livecd-2004.3
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 65536 bytes)
> Detected 2794.605 MHz processor.
> Using tsc for high-res timesource
> Speakup v-2.00 CVS: Wed Oct 20 14:26:13 EDT 2004 : initialized
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 1023644k/1038896k available (2296k kernel code, 14560k
> reserved, 536k data, 576k init, 121392k highmem)
> Checking if this processor honours the WP bit even in supervisor
> mode... Ok.
> Calibrating delay loop... 5505.02 BogoMIPS (lpj=2752512)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> Couldn't initialize miscdevice /dev/synth.
> CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000
> CPU: After vendor identify, caps:  bfebfbff 00100000 00000000 00000000
> monitor/mwait feature present.
> using mwait in idle threads.
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: After all inits, caps:        bfebfbff 00100000 00000000 00000080
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
> per-CPU timeslice cutoff: 2926.23 usecs.
> task migration cache decay timeout: 3 msecs.
> Booting processor 1/1 eip 2000
> Initializing CPU#1
> Calibrating delay loop... 5570.56 BogoMIPS (lpj=2785280)
> CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000
> CPU: After vendor identify, caps:  bfebfbff 00100000 00000000 00000000
> monitor/mwait feature present.
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: After all inits, caps:        bfebfbff 00100000 00000000 00000080
> CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
> Total of 2 processors activated (11075.58 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 pin1=2 pin2=0
> checking TSC synchronization across 2 CPUs: passed.
> Brought up 2 CPUs
> checking if image is initramfs...it isn't (no cpio magic); looks like
> an initrd
> Freeing initrd memory: 1615k freed
> NET: Registered protocol family 16
> EISA bus registered
> PCI: PCI BIOS revision 2.10 entry at 0xfb34b, last bus=4
> PCI: Using MMCONFIG
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040816
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> SCSI subsystem initialized
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> PCI: Transparent bridge - 0000:00:1e.0
> PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0
> PCI->APIC IRQ transform: (B0,I29,P0) -> 21
> PCI->APIC IRQ transform: (B0,I29,P1) -> 22
> PCI->APIC IRQ transform: (B0,I29,P2) -> 18
> PCI->APIC IRQ transform: (B0,I29,P3) -> 23
> PCI->APIC IRQ transform: (B0,I29,P0) -> 21
> PCI->APIC IRQ transform: (B0,I31,P0) -> 16
> PCI->APIC IRQ transform: (B0,I31,P2) -> 20
> PCI->APIC IRQ transform: (B0,I31,P1) -> 17
> PCI->APIC IRQ transform: (B2,I0,P0) -> 16
> PCI->APIC IRQ transform: (B4,I2,P0) -> 18
> PCI->APIC IRQ transform: (B4,I2,P1) -> 19
> Simple Boot Flag at 0x7a set to 0x1
> Starting balanced_irq
> highmem bounce pool size: 64 pages
> devfs: 2004-01-31 Richard Gooch (rgooch@××××××××××.au)
> devfs: boot_options: 0x0
> SGI XFS with ACLs, security attributes, realtime, large block numbers,
> no debug enabled
> SGI XFS Quota Management subsystem
> Initializing Cryptographic API
> inotify init: minor=63
> vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, size 3072k
> vesafb: mode is 1024x768x16, linelength=2048, pages=4
> vesafb: protected mode interface info at 00ff:44f0
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 128x48
> fbsplash: console 0 using theme 'livecd-2004.3'
> fbsplash: switched splash state to 'on' on console 0
> fb0: VESA VGA frame buffer device
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard on isa0060/serio0
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> loop: loaded (max 8 devices)
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> ICH6: IDE controller at PCI slot 0000:00:1f.1
> ICH6: chipset revision 3
> ICH6: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> Probing IDE interface ide0...
> hda: LITE-ON CD-ROM LTN-489S, ATAPI CD/DVD-ROM drive
> Using deadline io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> ide1: Wait for ready failed before probe !
> Probing IDE interface ide2...
> ide2: Wait for ready failed before probe !
> Probing IDE interface ide3...
> ide3: Wait for ready failed before probe !
> Probing IDE interface ide4...
> ide4: Wait for ready failed before probe !
> Probing IDE interface ide5...
> ide5: Wait for ready failed before probe !
> hda: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> CAPI Subsystem Rev 1.1.2.8
> EISA: Probing bus 0 at eisa0
> EISA: Detected 0 cards.
> NET: Registered protocol family 2
> IP: routing cache hash table of 8192 buckets, 64Kbytes
> TCP: Hash tables configured (established 262144 bind 65536)
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 576k freed
> EXT2-fs warning: checktime reached, running e2fsck is recommended
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: irq 21, pci mem f881c800
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> USB Universal Host Controller Interface driver v2.2
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: irq 21, io base 0000ff80
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: irq 22, io base 0000ff60
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: irq 18, io base 0000ff40
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: irq 23, io base 0000ff20
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ieee1394: Initialized config rom entry `ip1394'
> sbp2: $Rev: 1219 $ Ben Collins <bcollins@××××××.org>
> ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find
> reiserfs on hda
> VFS: Can't find ext3 filesystem on dev hda.
> VFS: Can't find ext2 filesystem on dev hda.
> SQUASHFS error: Can't find a SQUASHFS superblock on hda
> FAT: bogus number of reserved sectors
> VFS: Can't find a valid FAT filesystem on dev hda.
> ISO 9660 Extensions: Microsoft Joliet Level 3
> ISO 9660 Extensions: RRIP_1991A
> fbsplash: switching to verbose mode
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
> parport0: irq 7 detected
> tg3.c:v3.10 (September 14, 2004)
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)]
> (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:13:20:55:70:f5
> eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1]
> TSOcap[1]
> kobject_register failed for aic79xx (-17)
>  [<c023ecb7>]
>  [<c029db4f>]
>  [<c029dfba>]
>  [<c0246e95>]
>  [<f8dab39e>]
>  [<f8da5553>]
>  [<f882c00a>]
>  [<c012ab57>]
>  [<c01050e7>]
> libata version 1.02 loaded.
> Unable to handle kernel paging request at virtual address f8dbccbc
>  printing eip:
> c023ec2d
> *pde = 1ffe9067
> *pte = 00000000
> Oops: 0002 [#1]
> SMP
> Modules linked in: ata_piix libata evdev tg3 parport_pc parport sbp2
> ohci1394 ieee1394 ohci_hcd uhci_hcd usb_storage ehci_hcd
> CPU:    1
> EIP:    0060:[<c023ec2d>]    Not tainted VLI
> EFLAGS: 00010292   (2.6.9-gentoo-r1)
> eax: c03a3b64   ebx: f887e220   ecx: f8dbccbc   edx: f887e23c
> esi: c03a3b6c   edi: f887e204   ebp: 00000000   esp: f7843f50
> ds: 007b   es: 007b   ss: 0068
> Process modprobe (pid: 3345, threadinfo=f7842000 task=c1a68ef0)
> Stack: f887e220 ffffffea f887e204 c023ec9d f887e220 f887e220 f887e220
> c03a3b00
>        c029db4f f887e220 f887e1e0 00000000 f887e280 f7842000 c029dfba
> f887e204
>        c0246e95 f887e204 c0399560 f887e460 c0399544 f882c00a f887e1e0
> c012ab57
> Call Trace:
>  [<c023ec9d>]
>  [<c029db4f>]
>  [<c029dfba>]
>  [<c0246e95>]
>  [<f882c00a>]
>  [<c012ab57>]
>  [<c01050e7>]
> Code: 0f 85 1a 04 00 00 85 f6 75 0f 8b 43 28 83 c0 10 50 e8 98 01 00
> 00 89 c6 58 8b 43 28 83 c0 08 8b 48 04 8d 53 1c 89 43 1c 89 50 04 <89>
> 11 89 4a 04 8b 43 28 8b 38 8d 4f 48 89 c8 ba ff ff 00 00 f0
>  <6>fbsplash: console 11 using theme 'livecd-2004.3'
> fbsplash: switched splash state to 'on' on console 11
> tg3: eth0: Link is up at 100 Mbps, full duplex.
> tg3: eth0: Flow control is on for TX and on for RX.
> tg3: eth0: Link is up at 100 Mbps, full duplex.
> tg3: eth0: Flow control is on for TX and on for RX.
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c03b1220(lo)
> IPv6 over IPv4 tunneling driver
> eth0: no IPv6 routers present
> aacraid: falsely claims to have parameter commit
> Red Hat/Adaptec aacraid driver (1.1.2-lk2 Nov 25 2004)
>
>

-- 
gentoo-user-es@g.o mailing list