1 |
Una experiencia que yo tuve con las máquina DELL es que en el BIOS hay |
2 |
una opción para el manejo de discos duros, las opciones por defecto |
3 |
sólo funcionabam para güindous xp, pero al cambiar el modo de |
4 |
indetificación de los discos duros funcionaba bien para todos. |
5 |
|
6 |
2005/9/29, d2clon <d2clon@×××××××××××××××.org>: |
7 |
> hola gente: |
8 |
> |
9 |
> estaba yo tan contento que habíamos comprado un dell para ponerlo como |
10 |
> servidor y jubilar ya el piii que se queda un poco dormido.. |
11 |
> |
12 |
> entonces les digo a mis compis que me inserten el livecd y me den acceso |
13 |
> por red.. para ver si empezaba a instalarle algo.. ya sabeis "empezar es |
14 |
> tener la mitad del trabajo hecho" |
15 |
> |
16 |
> pero me pego la primera en la frente.. |
17 |
> no consigo activar el disco duro.. ñññeee |
18 |
> |
19 |
> no encuentro nada en el /dev/ a lo que hacerle un fdisk.. |
20 |
> si que hay un /dev/hda pero solo tiene 52megas.. creo que es un invento |
21 |
> del liveCd.. o no lo entiendo: [1] |
22 |
> |
23 |
> |
24 |
> estoy seguro que es cargar algún módulo pero no sé cual.. |
25 |
> mi esperiencia con otros DELL con discos duros SCSI tambien era activar |
26 |
> el módulo 'aacraid' |
27 |
> |
28 |
> pero se me ha quedado pillado en el 'modprobe' aunque parece que lo ha |
29 |
> levantado.. no se corta ni con ctrl+c ni con kill -9.. |
30 |
> |
31 |
> he intentado levantar otros módulos mirando los help de los módulos del |
32 |
> kernel: |
33 |
> # modprobe scsi_mod |
34 |
> FATAL: Module scsi_mod not found. |
35 |
> # modprobe sg |
36 |
> este no da error.. pero nadie lo usa |
37 |
> |
38 |
> he encontrado esto en google: |
39 |
> http://www.linuxquestions.org/questions/archive/47/2005/03/1/262404 |
40 |
> pero no veo que me ayude a activar mi disco. |
41 |
> |
42 |
> |
43 |
> aquí adjunto todos los datos que puedo recopilar a ver si a alguien se |
44 |
> le ocurre alguna sugerencia. |
45 |
> |
46 |
> gracias |
47 |
> d2clon |
48 |
> |
49 |
> [1]------- |
50 |
> livecd root # fdisk /dev/hda |
51 |
> You will not be able to write the partition table. |
52 |
> Note: sector size is 2048 (not 512) |
53 |
> Device contains neither a valid DOS partition table, nor Sun, SGI or OSF |
54 |
> disklabel |
55 |
> Building a new DOS disklabel. Changes will remain in memory only, |
56 |
> until you decide to write them. After that, of course, the previous |
57 |
> content won't be recoverable. |
58 |
> |
59 |
> Warning: invalid flag 0x0000 of partition table 4 will be corrected by |
60 |
> w(rite) |
61 |
> |
62 |
> Command (m for help): p |
63 |
> |
64 |
> Disk /dev/hda: 52 MB, 52992000 bytes |
65 |
> 255 heads, 63 sectors/track, 1 cylinders |
66 |
> Units = cylinders of 16065 * 2048 = 32901120 bytes |
67 |
> |
68 |
> Device Boot Start End Blocks Id System |
69 |
> |
70 |
> |
71 |
> ==lsmod===================================== |
72 |
> Module Size Used by |
73 |
> aacraid 31463 1 |
74 |
> ipv6 182560 12 |
75 |
> ata_piix 5574 1 |
76 |
> libata 25316 1 ata_piix |
77 |
> evdev 6464 0 |
78 |
> tg3 65860 0 |
79 |
> parport_pc 27072 0 |
80 |
> parport 22728 1 parport_pc |
81 |
> sbp2 16744 0 |
82 |
> ohci1394 24836 0 |
83 |
> ieee1394 62008 2 sbp2,ohci1394 |
84 |
> ohci_hcd 15044 0 |
85 |
> uhci_hcd 23152 0 |
86 |
> usb_storage 46208 0 |
87 |
> ehci_hcd 21028 0 |
88 |
> |
89 |
> == lspci ========================== |
90 |
> (fijaos que no sale ningún dispositivo SCSI.. a ver si va a ser que no |
91 |
> está enchufado el disco duro o algo) |
92 |
> |
93 |
> 0000:00:00.0 Host bridge: Intel Corp.: Unknown device 2588 (rev 04) |
94 |
> 0000:00:01.0 PCI bridge: Intel Corp.: Unknown device 2589 (rev 04) |
95 |
> 0000:00:02.0 VGA compatible controller: Intel Corp.: Unknown device 258a |
96 |
> (rev 04) |
97 |
> 0000:00:1c.0 PCI bridge: Intel Corp.: Unknown device 2660 (rev 03) |
98 |
> 0000:00:1c.1 PCI bridge: Intel Corp.: Unknown device 2662 (rev 03) |
99 |
> 0000:00:1d.0 USB Controller: Intel Corp.: Unknown device 2658 (rev 03) |
100 |
> 0000:00:1d.1 USB Controller: Intel Corp.: Unknown device 2659 (rev 03) |
101 |
> 0000:00:1d.2 USB Controller: Intel Corp.: Unknown device 265a (rev 03) |
102 |
> 0000:00:1d.3 USB Controller: Intel Corp.: Unknown device 265b (rev 03) |
103 |
> 0000:00:1d.7 USB Controller: Intel Corp.: Unknown device 265c (rev 03) |
104 |
> 0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev d3) |
105 |
> 0000:00:1f.0 ISA bridge: Intel Corp.: Unknown device 2640 (rev 03) |
106 |
> 0000:00:1f.1 IDE interface: Intel Corp.: Unknown device 266f (rev 03) |
107 |
> 0000:00:1f.2 IDE interface: Intel Corp.: Unknown device 2652 (rev 03) |
108 |
> 0000:00:1f.3 SMBus: Intel Corp.: Unknown device 266a (rev 03) |
109 |
> 0000:02:00.0 Ethernet controller: Broadcom Corporation: Unknown device |
110 |
> 1677 (rev 01) |
111 |
> 0000:04:02.0 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID |
112 |
> (rev 10) |
113 |
> 0000:04:02.1 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID |
114 |
> (rev 10) |
115 |
> |
116 |
> == ls -l /dev/ ============== |
117 |
> (quitando todos lo "tty" que había mogollón) |
118 |
> (si os fijais hay un hda.. pero solo tiene 52 megas.. creo que es un |
119 |
> invento del liveCd) |
120 |
> total 0 |
121 |
> lrwxrwxrwx 1 root root 8 Sep 28 19:42 cdrom -> /dev/hda |
122 |
> drwxr-xr-x 2 root root 0 Sep 28 19:41 cdroms |
123 |
> lrwxrwxrwx 1 root root 11 Sep 28 19:41 core -> /proc/kcore |
124 |
> drwxr-xr-x 2 root root 0 Sep 28 19:41 fb |
125 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 fb0 -> fb/0 |
126 |
> crw-rw---- 1 root root 10, 62 Sep 28 19:41 fbsplash |
127 |
> lrwxrwxrwx 1 root root 13 Sep 28 19:41 fd -> /proc/self/fd |
128 |
> crw-rw-rw- 1 root root 1, 7 Sep 28 19:41 full |
129 |
> brw-rw---- 1 root cdrom 3, 0 Sep 28 19:41 hda |
130 |
> drwxr-xr-x 3 root root 0 Sep 28 19:41 ide |
131 |
> prw------- 1 root root 0 Sep 28 19:42 initctl |
132 |
> crw-rw---- 1 root root 10, 63 Sep 28 19:41 inotify |
133 |
> drwxr-xr-x 2 root root 0 Sep 28 19:41 input |
134 |
> crw-r----- 1 root kmem 1, 2 Sep 28 19:41 kmem |
135 |
> crw-rw---- 1 root root 1, 11 Sep 28 19:41 kmsg |
136 |
> srw-rw-rw- 1 root root 0 Sep 28 19:42 log |
137 |
> drwxr-xr-x 2 root root 0 Sep 28 19:41 loop |
138 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop0 -> loop/0 |
139 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop1 -> loop/1 |
140 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop2 -> loop/2 |
141 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop3 -> loop/3 |
142 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop4 -> loop/4 |
143 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop5 -> loop/5 |
144 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop6 -> loop/6 |
145 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:41 loop7 -> loop/7 |
146 |
> crw-r----- 1 root kmem 1, 1 Sep 28 19:41 mem |
147 |
> crw-rw-rw- 1 root root 1, 3 Sep 28 19:41 null |
148 |
> crw-r----- 1 root kmem 1, 4 Sep 28 19:41 port |
149 |
> drwxr-xr-x 2 root root 0 Sep 28 19:41 pts |
150 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram0 -> rd/0 |
151 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram1 -> rd/1 |
152 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram10 -> rd/10 |
153 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram11 -> rd/11 |
154 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram12 -> rd/12 |
155 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram13 -> rd/13 |
156 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram14 -> rd/14 |
157 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:41 ram15 -> rd/15 |
158 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram2 -> rd/2 |
159 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram3 -> rd/3 |
160 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram4 -> rd/4 |
161 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram5 -> rd/5 |
162 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram6 -> rd/6 |
163 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram7 -> rd/7 |
164 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram8 -> rd/8 |
165 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 ram9 -> rd/9 |
166 |
> crw-rw-rw- 1 root root 1, 8 Sep 28 19:41 random |
167 |
> drwxr-xr-x 2 root root 0 Sep 28 19:41 rd |
168 |
> drwxrwxrwt 2 root root 40 Sep 28 19:41 shm |
169 |
> lrwxrwxrwx 1 root root 24 Sep 28 19:41 sndstat -> |
170 |
> /proc/asound/oss/sndstat |
171 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 stderr -> fd/2 |
172 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 stdin -> fd/0 |
173 |
> lrwxrwxrwx 1 root root 4 Sep 28 19:41 stdout -> fd/1 |
174 |
> drwxr-xr-x 2 root root 0 Sep 28 19:41 tts |
175 |
> cr--r--r-- 1 root root 1, 9 Sep 28 19:41 urandom |
176 |
> drwxr-xr-x 2 root root 0 Sep 28 19:41 vc |
177 |
> drwxr-xr-x 2 root root 0 Sep 28 19:42 vcc |
178 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:41 vcs -> vcc/0 |
179 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs1 -> vcc/1 |
180 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcs12 -> vcc/12 |
181 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs2 -> vcc/2 |
182 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs3 -> vcc/3 |
183 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs4 -> vcc/4 |
184 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs5 -> vcc/5 |
185 |
> lrwxrwxrwx 1 root root 5 Sep 28 19:42 vcs6 -> vcc/6 |
186 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:41 vcsa -> vcc/a0 |
187 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa1 -> vcc/a1 |
188 |
> lrwxrwxrwx 1 root root 7 Sep 28 19:42 vcsa12 -> vcc/a12 |
189 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa2 -> vcc/a2 |
190 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa3 -> vcc/a3 |
191 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa4 -> vcc/a4 |
192 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa5 -> vcc/a5 |
193 |
> lrwxrwxrwx 1 root root 6 Sep 28 19:42 vcsa6 -> vcc/a6 |
194 |
> crw-rw-rw- 1 root root 1, 5 Sep 28 19:41 zero |
195 |
> |
196 |
> |
197 |
> ===dmesg========= |
198 |
> Linux version 2.6.9-gentoo-r1 (root@inertia) (gcc version 3.3.4 20040623 |
199 |
> (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 SMP Thu Nov 25 |
200 |
> 03:24:02 UTC 2004 |
201 |
> BIOS-provided physical RAM map: |
202 |
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) |
203 |
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
204 |
> BIOS-e820: 0000000000100000 - 000000003f68cc00 (usable) |
205 |
> BIOS-e820: 000000003f68cc00 - 000000003f68ec00 (ACPI NVS) |
206 |
> BIOS-e820: 000000003f68ec00 - 000000003f690c00 (ACPI data) |
207 |
> BIOS-e820: 000000003f690c00 - 0000000040000000 (reserved) |
208 |
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) |
209 |
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) |
210 |
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) |
211 |
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) |
212 |
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) |
213 |
> 118MB HIGHMEM available. |
214 |
> 896MB LOWMEM available. |
215 |
> found SMP MP-table at 000fe710 |
216 |
> On node 0 totalpages: 259724 |
217 |
> DMA zone: 4096 pages, LIFO batch:1 |
218 |
> Normal zone: 225280 pages, LIFO batch:16 |
219 |
> HighMem zone: 30348 pages, LIFO batch:7 |
220 |
> DMI 2.3 present. |
221 |
> ACPI: RSDP (v000 DELL ) @ 0x000fec00 |
222 |
> ACPI: RSDT (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fcc8f |
223 |
> ACPI: FADT (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fcccb |
224 |
> ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd0e5e |
225 |
> ACPI: MADT (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fcd3f |
226 |
> ACPI: BOOT (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fcdb1 |
227 |
> ACPI: MCFG (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fcdd9 |
228 |
> ACPI: HPET (v001 DELL PESC420 0x00000007 ASL 0x00000061) @ 0x000fce17 |
229 |
> ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 |
230 |
> ACPI: Local APIC address 0xfee00000 |
231 |
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) |
232 |
> Processor #0 15:4 APIC version 20 |
233 |
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) |
234 |
> Processor #1 15:4 APIC version 20 |
235 |
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) |
236 |
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) |
237 |
> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) |
238 |
> Using ACPI for processor (LAPIC) configuration information |
239 |
> Intel MultiProcessor Specification v1.4 |
240 |
> Virtual Wire compatibility mode. |
241 |
> OEM ID: DELL Product ID: PE SC420 APIC at: 0xFEE00000 |
242 |
> I/O APIC #8 Version 32 at 0xFEC00000. |
243 |
> Enabling APIC mode: Flat. Using 1 I/O APICs |
244 |
> Processors: 2 |
245 |
> Built 1 zonelists |
246 |
> Kernel command line: initrd=gentoo.igz root=/dev/ram0 init=/linuxrc |
247 |
> acpi=ht looptype=squashfs loop=/livecd.squashfs udev nodevfs cdroot |
248 |
> vga=791 dokeymap splash=silent,theme:livecd-2004.3 BOOT_IMAGE=gentoo |
249 |
> fbsplash: silent |
250 |
> fbsplash: theme livecd-2004.3 |
251 |
> Initializing CPU#0 |
252 |
> PID hash table entries: 4096 (order: 12, 65536 bytes) |
253 |
> Detected 2794.605 MHz processor. |
254 |
> Using tsc for high-res timesource |
255 |
> Speakup v-2.00 CVS: Wed Oct 20 14:26:13 EDT 2004 : initialized |
256 |
> Console: colour dummy device 80x25 |
257 |
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
258 |
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
259 |
> Memory: 1023644k/1038896k available (2296k kernel code, 14560k reserved, |
260 |
> 536k data, 576k init, 121392k highmem) |
261 |
> Checking if this processor honours the WP bit even in supervisor mode... Ok. |
262 |
> Calibrating delay loop... 5505.02 BogoMIPS (lpj=2752512) |
263 |
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes) |
264 |
> Couldn't initialize miscdevice /dev/synth. |
265 |
> CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 |
266 |
> CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000 |
267 |
> monitor/mwait feature present. |
268 |
> using mwait in idle threads. |
269 |
> CPU: Trace cache: 12K uops, L1 D cache: 16K |
270 |
> CPU: L2 cache: 1024K |
271 |
> CPU: Physical Processor ID: 0 |
272 |
> CPU: After all inits, caps: bfebfbff 00100000 00000000 00000080 |
273 |
> Enabling fast FPU save and restore... done. |
274 |
> Enabling unmasked SIMD FPU exception support... done. |
275 |
> Checking 'hlt' instruction... OK. |
276 |
> CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01 |
277 |
> per-CPU timeslice cutoff: 2926.23 usecs. |
278 |
> task migration cache decay timeout: 3 msecs. |
279 |
> Booting processor 1/1 eip 2000 |
280 |
> Initializing CPU#1 |
281 |
> Calibrating delay loop... 5570.56 BogoMIPS (lpj=2785280) |
282 |
> CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 |
283 |
> CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000 |
284 |
> monitor/mwait feature present. |
285 |
> CPU: Trace cache: 12K uops, L1 D cache: 16K |
286 |
> CPU: L2 cache: 1024K |
287 |
> CPU: Physical Processor ID: 0 |
288 |
> CPU: After all inits, caps: bfebfbff 00100000 00000000 00000080 |
289 |
> CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01 |
290 |
> Total of 2 processors activated (11075.58 BogoMIPS). |
291 |
> ENABLING IO-APIC IRQs |
292 |
> ..TIMER: vector=0x31 pin1=2 pin2=0 |
293 |
> checking TSC synchronization across 2 CPUs: passed. |
294 |
> Brought up 2 CPUs |
295 |
> checking if image is initramfs...it isn't (no cpio magic); looks like an |
296 |
> initrd |
297 |
> Freeing initrd memory: 1615k freed |
298 |
> NET: Registered protocol family 16 |
299 |
> EISA bus registered |
300 |
> PCI: PCI BIOS revision 2.10 entry at 0xfb34b, last bus=4 |
301 |
> PCI: Using MMCONFIG |
302 |
> mtrr: v2.0 (20020519) |
303 |
> ACPI: Subsystem revision 20040816 |
304 |
> ACPI: Interpreter disabled. |
305 |
> Linux Plug and Play Support v0.97 (c) Adam Belay |
306 |
> SCSI subsystem initialized |
307 |
> usbcore: registered new driver usbfs |
308 |
> usbcore: registered new driver hub |
309 |
> PCI: Probing PCI hardware |
310 |
> PCI: Probing PCI hardware (bus 00) |
311 |
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 |
312 |
> PCI: Transparent bridge - 0000:00:1e.0 |
313 |
> PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0 |
314 |
> PCI->APIC IRQ transform: (B0,I29,P0) -> 21 |
315 |
> PCI->APIC IRQ transform: (B0,I29,P1) -> 22 |
316 |
> PCI->APIC IRQ transform: (B0,I29,P2) -> 18 |
317 |
> PCI->APIC IRQ transform: (B0,I29,P3) -> 23 |
318 |
> PCI->APIC IRQ transform: (B0,I29,P0) -> 21 |
319 |
> PCI->APIC IRQ transform: (B0,I31,P0) -> 16 |
320 |
> PCI->APIC IRQ transform: (B0,I31,P2) -> 20 |
321 |
> PCI->APIC IRQ transform: (B0,I31,P1) -> 17 |
322 |
> PCI->APIC IRQ transform: (B2,I0,P0) -> 16 |
323 |
> PCI->APIC IRQ transform: (B4,I2,P0) -> 18 |
324 |
> PCI->APIC IRQ transform: (B4,I2,P1) -> 19 |
325 |
> Simple Boot Flag at 0x7a set to 0x1 |
326 |
> Starting balanced_irq |
327 |
> highmem bounce pool size: 64 pages |
328 |
> devfs: 2004-01-31 Richard Gooch (rgooch@××××××××××.au) |
329 |
> devfs: boot_options: 0x0 |
330 |
> SGI XFS with ACLs, security attributes, realtime, large block numbers, |
331 |
> no debug enabled |
332 |
> SGI XFS Quota Management subsystem |
333 |
> Initializing Cryptographic API |
334 |
> inotify init: minor=63 |
335 |
> vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, size 3072k |
336 |
> vesafb: mode is 1024x768x16, linelength=2048, pages=4 |
337 |
> vesafb: protected mode interface info at 00ff:44f0 |
338 |
> vesafb: scrolling: redraw |
339 |
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 |
340 |
> Console: switching to colour frame buffer device 128x48 |
341 |
> fbsplash: console 0 using theme 'livecd-2004.3' |
342 |
> fbsplash: switched splash state to 'on' on console 0 |
343 |
> fb0: VESA VGA frame buffer device |
344 |
> isapnp: Scanning for PnP cards... |
345 |
> isapnp: No Plug & Play device found |
346 |
> serio: i8042 AUX port at 0x60,0x64 irq 12 |
347 |
> serio: i8042 KBD port at 0x60,0x64 irq 1 |
348 |
> Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled |
349 |
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
350 |
> mice: PS/2 mouse device common for all mice |
351 |
> input: AT Translated Set 2 keyboard on isa0060/serio0 |
352 |
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize |
353 |
> loop: loaded (max 8 devices) |
354 |
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
355 |
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
356 |
> ICH6: IDE controller at PCI slot 0000:00:1f.1 |
357 |
> ICH6: chipset revision 3 |
358 |
> ICH6: not 100% native mode: will probe irqs later |
359 |
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio |
360 |
> Probing IDE interface ide0... |
361 |
> hda: LITE-ON CD-ROM LTN-489S, ATAPI CD/DVD-ROM drive |
362 |
> Using deadline io scheduler |
363 |
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
364 |
> Probing IDE interface ide1... |
365 |
> ide1: Wait for ready failed before probe ! |
366 |
> Probing IDE interface ide2... |
367 |
> ide2: Wait for ready failed before probe ! |
368 |
> Probing IDE interface ide3... |
369 |
> ide3: Wait for ready failed before probe ! |
370 |
> Probing IDE interface ide4... |
371 |
> ide4: Wait for ready failed before probe ! |
372 |
> Probing IDE interface ide5... |
373 |
> ide5: Wait for ready failed before probe ! |
374 |
> hda: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33) |
375 |
> Uniform CD-ROM driver Revision: 3.20 |
376 |
> usbcore: registered new driver hiddev |
377 |
> usbcore: registered new driver usbhid |
378 |
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver |
379 |
> CAPI Subsystem Rev 1.1.2.8 |
380 |
> EISA: Probing bus 0 at eisa0 |
381 |
> EISA: Detected 0 cards. |
382 |
> NET: Registered protocol family 2 |
383 |
> IP: routing cache hash table of 8192 buckets, 64Kbytes |
384 |
> TCP: Hash tables configured (established 262144 bind 65536) |
385 |
> NET: Registered protocol family 1 |
386 |
> NET: Registered protocol family 17 |
387 |
> RAMDISK: Compressed image found at block 0 |
388 |
> VFS: Mounted root (ext2 filesystem) readonly. |
389 |
> Freeing unused kernel memory: 576k freed |
390 |
> EXT2-fs warning: checktime reached, running e2fsck is recommended |
391 |
> ehci_hcd 0000:00:1d.7: EHCI Host Controller |
392 |
> PCI: Setting latency timer of device 0000:00:1d.7 to 64 |
393 |
> ehci_hcd 0000:00:1d.7: irq 21, pci mem f881c800 |
394 |
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 |
395 |
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7 |
396 |
> ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 |
397 |
> hub 1-0:1.0: USB hub found |
398 |
> hub 1-0:1.0: 8 ports detected |
399 |
> Initializing USB Mass Storage driver... |
400 |
> usbcore: registered new driver usb-storage |
401 |
> USB Mass Storage support registered. |
402 |
> USB Universal Host Controller Interface driver v2.2 |
403 |
> uhci_hcd 0000:00:1d.0: UHCI Host Controller |
404 |
> PCI: Setting latency timer of device 0000:00:1d.0 to 64 |
405 |
> uhci_hcd 0000:00:1d.0: irq 21, io base 0000ff80 |
406 |
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
407 |
> hub 2-0:1.0: USB hub found |
408 |
> hub 2-0:1.0: 2 ports detected |
409 |
> uhci_hcd 0000:00:1d.1: UHCI Host Controller |
410 |
> PCI: Setting latency timer of device 0000:00:1d.1 to 64 |
411 |
> uhci_hcd 0000:00:1d.1: irq 22, io base 0000ff60 |
412 |
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 |
413 |
> hub 3-0:1.0: USB hub found |
414 |
> hub 3-0:1.0: 2 ports detected |
415 |
> uhci_hcd 0000:00:1d.2: UHCI Host Controller |
416 |
> PCI: Setting latency timer of device 0000:00:1d.2 to 64 |
417 |
> uhci_hcd 0000:00:1d.2: irq 18, io base 0000ff40 |
418 |
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 |
419 |
> hub 4-0:1.0: USB hub found |
420 |
> hub 4-0:1.0: 2 ports detected |
421 |
> uhci_hcd 0000:00:1d.3: UHCI Host Controller |
422 |
> PCI: Setting latency timer of device 0000:00:1d.3 to 64 |
423 |
> uhci_hcd 0000:00:1d.3: irq 23, io base 0000ff20 |
424 |
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 |
425 |
> hub 5-0:1.0: USB hub found |
426 |
> hub 5-0:1.0: 2 ports detected |
427 |
> ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
428 |
> ieee1394: Initialized config rom entry `ip1394' |
429 |
> sbp2: $Rev: 1219 $ Ben Collins <bcollins@××××××.org> |
430 |
> ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find |
431 |
> reiserfs on hda |
432 |
> VFS: Can't find ext3 filesystem on dev hda. |
433 |
> VFS: Can't find ext2 filesystem on dev hda. |
434 |
> SQUASHFS error: Can't find a SQUASHFS superblock on hda |
435 |
> FAT: bogus number of reserved sectors |
436 |
> VFS: Can't find a valid FAT filesystem on dev hda. |
437 |
> ISO 9660 Extensions: Microsoft Joliet Level 3 |
438 |
> ISO 9660 Extensions: RRIP_1991A |
439 |
> fbsplash: switching to verbose mode |
440 |
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] |
441 |
> parport0: irq 7 detected |
442 |
> tg3.c:v3.10 (September 14, 2004) |
443 |
> PCI: Setting latency timer of device 0000:02:00.0 to 64 |
444 |
> eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCIX:100MHz:32-bit) |
445 |
> 10/100/1000BaseT Ethernet 00:13:20:55:70:f5 |
446 |
> eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] |
447 |
> TSOcap[1] |
448 |
> kobject_register failed for aic79xx (-17) |
449 |
> [<c023ecb7>] |
450 |
> [<c029db4f>] |
451 |
> [<c029dfba>] |
452 |
> [<c0246e95>] |
453 |
> [<f8dab39e>] |
454 |
> [<f8da5553>] |
455 |
> [<f882c00a>] |
456 |
> [<c012ab57>] |
457 |
> [<c01050e7>] |
458 |
> libata version 1.02 loaded. |
459 |
> Unable to handle kernel paging request at virtual address f8dbccbc |
460 |
> printing eip: |
461 |
> c023ec2d |
462 |
> *pde = 1ffe9067 |
463 |
> *pte = 00000000 |
464 |
> Oops: 0002 [#1] |
465 |
> SMP |
466 |
> Modules linked in: ata_piix libata evdev tg3 parport_pc parport sbp2 |
467 |
> ohci1394 ieee1394 ohci_hcd uhci_hcd usb_storage ehci_hcd |
468 |
> CPU: 1 |
469 |
> EIP: 0060:[<c023ec2d>] Not tainted VLI |
470 |
> EFLAGS: 00010292 (2.6.9-gentoo-r1) |
471 |
> eax: c03a3b64 ebx: f887e220 ecx: f8dbccbc edx: f887e23c |
472 |
> esi: c03a3b6c edi: f887e204 ebp: 00000000 esp: f7843f50 |
473 |
> ds: 007b es: 007b ss: 0068 |
474 |
> Process modprobe (pid: 3345, threadinfo=f7842000 task=c1a68ef0) |
475 |
> Stack: f887e220 ffffffea f887e204 c023ec9d f887e220 f887e220 f887e220 |
476 |
> c03a3b00 |
477 |
> c029db4f f887e220 f887e1e0 00000000 f887e280 f7842000 c029dfba |
478 |
> f887e204 |
479 |
> c0246e95 f887e204 c0399560 f887e460 c0399544 f882c00a f887e1e0 |
480 |
> c012ab57 |
481 |
> Call Trace: |
482 |
> [<c023ec9d>] |
483 |
> [<c029db4f>] |
484 |
> [<c029dfba>] |
485 |
> [<c0246e95>] |
486 |
> [<f882c00a>] |
487 |
> [<c012ab57>] |
488 |
> [<c01050e7>] |
489 |
> Code: 0f 85 1a 04 00 00 85 f6 75 0f 8b 43 28 83 c0 10 50 e8 98 01 00 00 |
490 |
> 89 c6 58 8b 43 28 83 c0 08 8b 48 04 8d 53 1c 89 43 1c 89 50 04 <89> 11 |
491 |
> 89 4a 04 8b 43 28 8b 38 8d 4f 48 89 c8 ba ff ff 00 00 f0 |
492 |
> <6>fbsplash: console 11 using theme 'livecd-2004.3' |
493 |
> fbsplash: switched splash state to 'on' on console 11 |
494 |
> tg3: eth0: Link is up at 100 Mbps, full duplex. |
495 |
> tg3: eth0: Flow control is on for TX and on for RX. |
496 |
> tg3: eth0: Link is up at 100 Mbps, full duplex. |
497 |
> tg3: eth0: Flow control is on for TX and on for RX. |
498 |
> NET: Registered protocol family 10 |
499 |
> Disabled Privacy Extensions on device c03b1220(lo) |
500 |
> IPv6 over IPv4 tunneling driver |
501 |
> eth0: no IPv6 routers present |
502 |
> aacraid: falsely claims to have parameter commit |
503 |
> Red Hat/Adaptec aacraid driver (1.1.2-lk2 Nov 25 2004) |
504 |
> |
505 |
> |
506 |
> -- |
507 |
> gentoo-user-es@g.o mailing list |
508 |
> |
509 |
> |
510 |
|
511 |
|
512 |
-- |
513 |
"La televisón me respeta, se ríe con migo y no te mí" |
514 |
Homero J. Simpson |
515 |
|
516 |
-- |
517 |
gentoo-user-es@g.o mailing list |