| 1 |
Salut, |
| 2 |
|
| 3 |
je suis presque au bout de mes histoires de mise à jour udev, me reste |
| 4 |
un probleme que je ne capte pas. |
| 5 |
Et chauqe fois que ej cherche je tombe sur des docs relatives à |
| 6 |
d'anciennes versions de udev (celle que j'avais avant quoi). |
| 7 |
|
| 8 |
Exemple. |
| 9 |
J'ai une clef usb que usbview me voit comme ceci : (voir en bas du mail) |
| 10 |
|
| 11 |
et que lsusb voit ainsi : |
| 12 |
Bus 005 Device 003: ID 0ea0:2168 Ours Technology, Inc. Transcend |
| 13 |
JetFlash 2.0 |
| 14 |
|
| 15 |
Alors suite à montée de version, j'ai migré mes scripts udev perso et |
| 16 |
voilà par exemple ec que j'ai dans /etc/udev/rules.d/10-perso-USB.rules: |
| 17 |
#clef usb standard |
| 18 |
SUBSYSTEMS="usb",ATTRS{product}=="Flash Disk", NAME="%k", SYMLINK="usbdisk" |
| 19 |
|
| 20 |
|
| 21 |
Bon, |
| 22 |
et bien, ca ne marche pas, je veux dire par là : le lien /dev/usbdisk |
| 23 |
n'est jamais créé. |
| 24 |
|
| 25 |
Même chose pour mon appareil photo, mon scanner, mon lecteur de cartes |
| 26 |
mémoires ... |
| 27 |
|
| 28 |
Je me loupe où ? |
| 29 |
|
| 30 |
merci .... |
| 31 |
|
| 32 |
|
| 33 |
vlà aussi mon dmesg : |
| 34 |
|
| 35 |
usb 5-5: new high speed USB device using ehci_hcd and address 3 |
| 36 |
Initializing USB Mass Storage driver... |
| 37 |
scsi2 : SCSI emulation for USB Mass Storage devices |
| 38 |
usb-storage: device found at 3 |
| 39 |
usb-storage: waiting for device to settle before scanning |
| 40 |
usbcore: registered new driver usb-storage |
| 41 |
USB Mass Storage support registered. |
| 42 |
Vendor: Generic Model: USB Flash Disk Rev: 2.00 |
| 43 |
Type: Direct-Access ANSI SCSI revision: 02 |
| 44 |
ready |
| 45 |
SCSI device sdb: 255488 512-byte hdwr sectors (131 MB) |
| 46 |
sdb: Write Protect is off |
| 47 |
sdb: Mode Sense: 03 00 00 00 |
| 48 |
sdb: assuming drive cache: write through |
| 49 |
SCSI device sdb: 255488 512-byte hdwr sectors (131 MB) |
| 50 |
sdb: Write Protect is off |
| 51 |
sdb: Mode Sense: 03 00 00 00 |
| 52 |
sdb: assuming drive cache: write through |
| 53 |
sdb: unknown partition table |
| 54 |
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0 |
| 55 |
usb-storage: device scan complete |
| 56 |
|
| 57 |
|
| 58 |
|
| 59 |
<ci dessous la sortie usbview> |
| 60 |
|
| 61 |
Flash Disk |
| 62 |
Manufacturer: USB |
| 63 |
Serial Number: FCA4B94085E6F5EA |
| 64 |
Speed: 480Mb/s (high) |
| 65 |
USB Version: 2.00 |
| 66 |
Device Class: 00(>ifc ) |
| 67 |
Device Subclass: 00 |
| 68 |
Device Protocol: 00 |
| 69 |
Maximum Default Endpoint Size: 64 |
| 70 |
Number of Configurations: 1 |
| 71 |
Vendor Id: 0ea0 |
| 72 |
Product Id: 2168 |
| 73 |
Revision Number: 2.00 |
| 74 |
|
| 75 |
Config Number: 1 |
| 76 |
Number of Interfaces: 1 |
| 77 |
Attributes: 80 |
| 78 |
MaxPower Needed: 200mA |
| 79 |
|
| 80 |
Interface Number: 0 |
| 81 |
Name: usb-storage |
| 82 |
Alternate Number: 0 |
| 83 |
Class: 08(stor.) |
| 84 |
Sub Class: 6 |
| 85 |
Protocol: 50 |
| 86 |
Number of Endpoints: 3 |
| 87 |
|
| 88 |
Endpoint Address: 81 |
| 89 |
Direction: in |
| 90 |
Attribute: 2 |
| 91 |
Type: Bulk |
| 92 |
Max Packet Size: 512 |
| 93 |
Interval: 0ms |
| 94 |
|
| 95 |
Endpoint Address: 02 |
| 96 |
Direction: out |
| 97 |
Attribute: 2 |
| 98 |
Type: Bulk |
| 99 |
Max Packet Size: 512 |
| 100 |
Interval: 0ms |
| 101 |
|
| 102 |
Endpoint Address: 83 |
| 103 |
Direction: in |
| 104 |
Attribute: 3 |
| 105 |
Type: Int. |
| 106 |
Max Packet Size: 2 |
| 107 |
Interval: 125us |
| 108 |
-- |
| 109 |
gentoo-user-fr@g.o mailing list |
Archives