1 |
je met le résultat des smart mon tool, |
2 |
si quelqu'un pouvait me faire une traduction |
3 |
|
4 |
merci |
5 |
|
6 |
|
7 |
astar:~# smartctl --all /dev/hda5 |
8 |
smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen |
9 |
Home page is http://smartmontools.sourceforge.net/ |
10 |
|
11 |
=== START OF INFORMATION SECTION === |
12 |
Model Family: Western Digital Caviar family |
13 |
Device Model: WDC WD800BB-00CAA1 |
14 |
Serial Number: WD-WCA8E4664997 |
15 |
Firmware Version: 17.07W17 |
16 |
User Capacity: 80,026,361,856 bytes |
17 |
Device is: In smartctl database [for details use: -P show] |
18 |
ATA Version is: 5 |
19 |
ATA Standard is: Exact ATA specification draft version not indicated |
20 |
Local Time is: Wed Dec 28 13:26:09 2005 CET |
21 |
SMART support is: Available - device has SMART capability. |
22 |
SMART support is: Enabled |
23 |
|
24 |
=== START OF READ SMART DATA SECTION === |
25 |
SMART overall-health self-assessment test result: PASSED |
26 |
|
27 |
General SMART Values: |
28 |
Offline data collection status: (0x85) Offline data collection activity |
29 |
was aborted by an interrupting |
30 |
command from host. |
31 |
Auto Offline Data Collection: Enabled. |
32 |
Self-test execution status: ( 121) The previous self-test completed having |
33 |
the read element of the test failed. |
34 |
Total time to complete Offline |
35 |
data collection: (3120) seconds. |
36 |
Offline data collection |
37 |
capabilities: (0x3b) SMART execute Offline immediate. |
38 |
Auto Offline data collection |
39 |
on/off support. |
40 |
Suspend Offline collection upon new |
41 |
command. |
42 |
Offline surface scan supported. |
43 |
Self-test supported. |
44 |
Conveyance Self-test supported. |
45 |
No Selective Self-test supported. |
46 |
SMART capabilities: (0x0003) Saves SMART data before entering |
47 |
power-saving mode. |
48 |
Supports SMART auto save timer. |
49 |
Error logging capability: (0x01) Error logging supported. |
50 |
No General Purpose Logging support. |
51 |
Short self-test routine |
52 |
recommended polling time: ( 2) minutes. |
53 |
Extended self-test routine |
54 |
recommended polling time: ( 58) minutes. |
55 |
Conveyance self-test routine |
56 |
recommended polling time: ( 5) minutes. |
57 |
|
58 |
SMART Attributes Data Structure revision number: 16 |
59 |
Vendor Specific SMART Attributes with Thresholds: |
60 |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE |
61 |
UPDATED WHEN_FAILED RAW_VALUE |
62 |
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail |
63 |
Always - 0 |
64 |
3 Spin_Up_Time 0x0007 103 094 021 Pre-fail |
65 |
Always - 3925 |
66 |
4 Start_Stop_Count 0x0032 099 099 040 Old_age |
67 |
Always - 1373 |
68 |
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail |
69 |
Always - 3 |
70 |
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail |
71 |
Always - 0 |
72 |
9 Power_On_Hours 0x0032 090 090 000 Old_age |
73 |
Always - 7570 |
74 |
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail |
75 |
Always - 0 |
76 |
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail |
77 |
Always - 0 |
78 |
12 Power_Cycle_Count 0x0032 099 099 000 Old_age |
79 |
Always - 1362 |
80 |
196 Reallocated_Event_Count 0x0032 198 198 000 Old_age |
81 |
Always - 2 |
82 |
197 Current_Pending_Sector 0x0012 200 200 000 Old_age |
83 |
Always - 2 |
84 |
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age |
85 |
Always - 0 |
86 |
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age |
87 |
Always - 4 |
88 |
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail |
89 |
Offline - 0 |
90 |
|
91 |
SMART Error Log Version: 1 |
92 |
ATA Error Count: 224 (device log contains only the most recent five errors) |
93 |
CR = Command Register [HEX] |
94 |
FR = Features Register [HEX] |
95 |
SC = Sector Count Register [HEX] |
96 |
SN = Sector Number Register [HEX] |
97 |
CL = Cylinder Low Register [HEX] |
98 |
CH = Cylinder High Register [HEX] |
99 |
DH = Device/Head Register [HEX] |
100 |
DC = Device Command Register [HEX] |
101 |
ER = Error register [HEX] |
102 |
ST = Status register [HEX] |
103 |
Powered_Up_Time is measured from power on, and printed as |
104 |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
105 |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. |
106 |
|
107 |
Error 224 occurred at disk power-on lifetime: 1014 hours (42 days + 6 hours) |
108 |
When the command that caused the error occurred, the device was |
109 |
doing SMART Offline or Self-test. |
110 |
|
111 |
After command completion occurred, registers were: |
112 |
ER ST SC SN CL CH DH |
113 |
-- -- -- -- -- -- -- |
114 |
40 51 08 c6 76 0e e3 Error: UNC 8 sectors at LBA = 0x030e76c6 = 51279558 |
115 |
|
116 |
Commands leading to the command that caused the error were: |
117 |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
118 |
-- -- -- -- -- -- -- -- ---------------- -------------------- |
119 |
c8 00 08 bf 76 0e e3 00 03:29:41.450 READ DMA |
120 |
c8 00 08 b7 76 0e e3 00 03:29:41.450 READ DMA |
121 |
c8 00 02 b9 76 0e e3 00 03:29:41.450 READ DMA |
122 |
c8 00 08 ef d2 b7 e2 00 03:29:41.050 READ DMA |
123 |
c8 00 08 4f 43 bb e2 00 03:29:41.050 READ DMA |
124 |
|
125 |
Error 223 occurred at disk power-on lifetime: 1014 hours (42 days + 6 hours) |
126 |
When the command that caused the error occurred, the device was |
127 |
doing SMART Offline or Self-test. |
128 |
|
129 |
After command completion occurred, registers were: |
130 |
ER ST SC SN CL CH DH |
131 |
-- -- -- -- -- -- -- |
132 |
40 51 38 c6 76 0e e3 Error: UNC 56 sectors at LBA = 0x030e76c6 = 51279558 |
133 |
|
134 |
Commands leading to the command that caused the error were: |
135 |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
136 |
-- -- -- -- -- -- -- -- ---------------- -------------------- |
137 |
c8 00 38 bf 76 0e e3 00 03:21:12.550 READ DMA |
138 |
c8 00 40 b7 76 0e e3 00 03:21:09.550 READ DMA |
139 |
ca 00 08 ef 1e 5c e2 00 03:21:08.000 WRITE DMA |
140 |
ca 00 10 df 1e 5c e2 00 03:21:08.000 WRITE DMA |
141 |
ca 00 08 e7 d2 fb e2 00 03:21:05.700 WRITE DMA |
142 |
|
143 |
Error 222 occurred at disk power-on lifetime: 1014 hours (42 days + 6 hours) |
144 |
When the command that caused the error occurred, the device was |
145 |
doing SMART Offline or Self-test. |
146 |
|
147 |
After command completion occurred, registers were: |
148 |
ER ST SC SN CL CH DH |
149 |
-- -- -- -- -- -- -- |
150 |
40 51 40 c6 76 0e e3 Error: UNC 64 sectors at LBA = 0x030e76c6 = 51279558 |
151 |
|
152 |
Commands leading to the command that caused the error were: |
153 |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
154 |
-- -- -- -- -- -- -- -- ---------------- -------------------- |
155 |
c8 00 40 b7 76 0e e3 00 03:21:09.550 READ DMA |
156 |
ca 00 08 ef 1e 5c e2 00 03:21:08.000 WRITE DMA |
157 |
ca 00 10 df 1e 5c e2 00 03:21:08.000 WRITE DMA |
158 |
ca 00 08 e7 d2 fb e2 00 03:21:05.700 WRITE DMA |
159 |
ca 00 08 ff c2 fb e2 00 03:21:05.700 WRITE DMA |
160 |
|
161 |
Error 221 occurred at disk power-on lifetime: 1014 hours (42 days + 6 hours) |
162 |
When the command that caused the error occurred, the device was |
163 |
doing SMART Offline or Self-test. |
164 |
|
165 |
After command completion occurred, registers were: |
166 |
ER ST SC SN CL CH DH |
167 |
-- -- -- -- -- -- -- |
168 |
40 51 b8 c6 76 0e e3 Error: UNC 184 sectors at LBA = 0x030e76c6 = 51279558 |
169 |
|
170 |
Commands leading to the command that caused the error were: |
171 |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
172 |
-- -- -- -- -- -- -- -- ---------------- -------------------- |
173 |
c8 00 b8 bf 76 0e e3 00 03:17:41.200 READ DMA |
174 |
c8 00 40 6f c3 88 e2 00 03:17:41.200 READ DMA |
175 |
c8 00 20 47 c3 88 e2 00 03:17:41.200 READ DMA |
176 |
c8 00 18 2f c3 88 e2 00 03:17:41.200 READ DMA |
177 |
c8 00 08 77 0a b6 e2 00 03:17:41.200 READ DMA |
178 |
|
179 |
Error 220 occurred at disk power-on lifetime: 1014 hours (42 days + 6 hours) |
180 |
When the command that caused the error occurred, the device was |
181 |
doing SMART Offline or Self-test. |
182 |
|
183 |
After command completion occurred, registers were: |
184 |
ER ST SC SN CL CH DH |
185 |
-- -- -- -- -- -- -- |
186 |
40 51 08 c6 76 0e e3 Error: UNC 8 sectors at LBA = 0x030e76c6 = 51279558 |
187 |
|
188 |
Commands leading to the command that caused the error were: |
189 |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
190 |
-- -- -- -- -- -- -- -- ---------------- -------------------- |
191 |
c8 00 08 bf 76 0e e3 00 03:17:24.400 READ DMA |
192 |
c8 00 08 b7 76 0e e3 00 03:17:24.400 READ DMA |
193 |
c8 00 02 b9 76 0e e3 00 03:17:24.400 READ DMA |
194 |
c8 00 08 4f 43 bb e2 00 03:17:24.400 READ DMA |
195 |
c8 00 18 ff 42 89 e2 00 03:17:24.400 READ DMA |
196 |
|
197 |
SMART Self-test log structure revision number 1 |
198 |
Num Test_Description Status Remaining |
199 |
LifeTime(hours) LBA_of_first_error |
200 |
# 1 Extended offline Completed: read failure 90% 1014 |
201 |
51279558 |
202 |
# 2 Short offline Completed without error 00% 166 - |
203 |
|
204 |
Device does not support Selective Self Tests/Logging |
205 |
|
206 |
|
207 |
On 12/28/05, Antoine Raillon <antoine.raillon@××××××.net> wrote: |
208 |
> jm pp <jm.pppp@×××××.com> a écrit : |
209 |
> |
210 |
> 'jour ;p |
211 |
> |
212 |
> > qq un aurait un diagnotic |
213 |
> |
214 |
> Ca pour moi, c'est un dd mort et bien mort ;) |
215 |
> |
216 |
> Si tes logs kernels étaient pas sur ce disque, remonte les sur qqes |
217 |
> jours, tu dois pouvoir trouver des erreurs similaires dedans qui |
218 |
> t'indiqueront depuis quand il déconnait et essayait de te prévenir ;) |
219 |
> |
220 |
> pour ce qui est des données.. je ne sais pas si il existe qqchose |
221 |
> comme easyrecovery (ou autre) sous linux, mais ca m'etonnerait bien que |
222 |
> non. Sinon tu peux toujours tenter avec dd (la commande, pas |
223 |
> l'abréviation ;p) |
224 |
> |
225 |
> bon courage ! |
226 |
> |
227 |
> -- |
228 |
> Antoine Raillon <antoine.raillon@××××××.net> |
229 |
> |
230 |
> |
231 |
> -- |
232 |
> gentoo-user-fr@g.o mailing list |
233 |
> |
234 |
> |
235 |
|
236 |
-- |
237 |
gentoo-user-fr@g.o mailing list |