Gentoo Archives: gentoo-user-hu

From: Bukuli Norbert <bukuli.norbert@×××××.com>
To: gentoo-user-hu@l.g.o
Subject: Re: [gentoo-user-hu] Re: CD eject probléma
Date: Fri, 25 Jun 2010 08:02:14
Message-Id: AANLkTinMwC7RQFlAsb5UfkrBYcDDhhILhBhxcc1g1wHw@mail.gmail.com
In Reply to: Re: [gentoo-user-hu] Re: CD eject probléma by Testa
Szia!

Elvileg nincs.
Este leszek gép előtt, akkor tudom megmondani pontosan.

Testa <testa.a.tapos@×××××.com> írta (2010. június 24. 23:54):
> Bocs hogy közbe röfögök nem olvastam végig mindent elég figyelmesen. > De nincs véletlen bekapcsolva a scsi emuláció???? > > On 23 June 2010 23:30, Bukuli Norbert <bukuli.norbert@×××××.com> wrote: >> A config magától generálódik, minden induláskor. >> >> $ sudo grep 0000:03:00.0 /var/log/dmesg >> pci 0000:03:00.0: reg 24 32bit mmio: [0xf8000000-0xf8001fff] >> pci 0000:03:00.0: PME# supported from D3hot >> pci 0000:03:00.0: PME# disabled >> ahci 0000:03:00.0: version 3.0 >> ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode >> ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part >> ahci 0000:03:00.0: setting latency timer to 64 >> >> >> $ sudo grep 0000:03:00.1 /var/log/dmesg >> pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007] >> pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103] >> pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207] >> pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303] >> pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f] >> jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02) >> pci 0000:03:00.1: enabling device (0000 -> 0001) >> pci 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >> jmicron 0000:03:00.1: 100% native mode on irq 17 >> pci 0000:03:00.1: setting latency timer to 64 >> >> Sajnos nem vagyok tisztában vele, hogy a PCI buszon milyen szabályok >> szerint történik az eszközök számozása, de ha a .1 végűt összevetem a >> korábban írtakkal, akkor lehet némi tartománybeli egyezést >> megfigyelni: >> >> ide0 at 0xc000-0xc007,0xc102 on irq 17 >> pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007] >> >> ill.: >> >> ide1 at 0xc200-0xc207,0xc302 on irq 17 >> pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207] >> >> >> Persze lehet, hogy ez két teljesen külön álló buszon szereplő >> címtartomány és csak véletlen egybeesésről van szó. >> >> 2010/6/23 cjvt <cjvt@××××××××.hu>: >>> Nem biztos de ez alapjan a NEC-nek a rule-ban nem a >>> pci-0000:03:00.0 -on kene lennie? >>> >>> >>> 2010. június 23. 22:44:52 dátummal Bukuli Norbert az alábbiakat írta: >>>> Úgy értettem, hogy egy eject folyamán nem keletkezik semmilyen >>>> bejegyzés a dmesgben. >>>> >>>> A vonatkozó sorok: >>>> Probing IDE interface ide0... >>>> hda: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive >>>> hdb: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive >>>> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >>>> hda: UDMA/33 mode selected >>>> hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >>>> hdb: UDMA/66 mode selected >>>> Probing IDE interface ide1... >>>> ide0 at 0xc000-0xc007,0xc102 on irq 17 >>>> ide1 at 0xc200-0xc207,0xc302 on irq 17 >>>> ide_generic: please use "probe_mask=0x3f" module parameter for probing >>>> all legacy ISA IDE ports >>>> ide-gd driver 1.18 >>>> ide-cd driver 5.00 >>>> ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache >>>> Uniform CD-ROM driver Revision: 3.20 >>>> ide-cd: hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache >>>> >>>> ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>>> ata4.01: HPA detected: current 234439535, native 234441648 >>>> ata4.01: ATA-7: SAMSUNG HD120IJ, WZ100-33, max UDMA7 >>>> ata4.01: 234439535 sectors, multi 16: LBA48 NCQ (depth 0/32) >>>> ata4.01: configured for UDMA/133 >>>> >>>> ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320) >>>> ata3.01: HPA detected: current 976771055, native 976773168 >>>> ata3.01: ATA-8: WDC WD5000AAKS-22A7B0, 01.03B01, max UDMA/133 >>>> ata3.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32) >>>> ata3.01: configured for UDMA/133 >>>> >>>> >>>> # lshw -C disk >>>>   *-cdrom:0 >>>>        description: DVD writer >>>>        product: _NEC DVD_RW ND-3500AG >>>>        physical id: 0 >>>>        bus info: ide@0.0 >>>>        logical name: /dev/hda >>>>        version: 2.1B >>>>        capabilities: packet atapi cdrom removable nonmagnetic dma lba >>>> iordy audio cd-r cd-rw dvd dvd-r >>>>        configuration: mode=udma2 status=nodisc >>>>   *-cdrom:1 >>>>        description: DVD writer >>>>        product: PIONEER DVD-RW DVR-111D >>>>        vendor: Pioneer >>>>        physical id: 1 >>>>        bus info: ide@0.1 >>>>        logical name: /dev/hdb >>>>        version: 1.19 >>>>        capabilities: packet atapi cdrom removable nonmagnetic dma lba >>>> iordy pm audio cd-r cd-rw dvd dvd-r >>>>        configuration: mode=udma4 status=nodisc >>>>   *-disk:0 >>>>        description: ATA Disk >>>>        product: WDC WD5000AAKS-2 >>>>        vendor: Western Digital >>>>        physical id: 0 >>>>        bus info: scsi@2:0.1.0 >>>>        logical name: /dev/sda >>>>        version: 01.0 >>>>        serial: WD-WMASY3020281 >>>>        size: 465GiB (500GB) >>>>        capabilities: partitioned partitioned:dos >>>>        configuration: ansiversion=5 signature=24eeb6a2 >>>>   *-disk:1 >>>>        description: ATA Disk >>>>        product: SAMSUNG HD120IJ >>>>        physical id: 1 >>>>        bus info: scsi@3:0.1.0 >>>>        logical name: /dev/sdb >>>>        version: WZ10 >>>>        serial: S0AEJ1LYB06095 >>>>        size: 111GiB (120GB) >>>>        capabilities: partitioned partitioned:dos >>>>        configuration: ansiversion=5 signature=a8a8a8a8 >>>> >>> >>> >> >> >> >> -- >> Üdvözlettel: >> Bukuli Norbert >> >> > > > > -- > www.airndsoft.com > Artificial Intelligence Research aNd Development Software Company > >
-- Üdvözlettel: Bukuli Norbert

Replies

Subject Author
Re: [gentoo-user-hu] Re: CD eject probléma Bukuli Norbert <bukuli.norbert@×××××.com>