Gentoo Archives: gentoo-user-hu

From: Testa <testa.a.tapos@×××××.com>
To: gentoo-user-hu@l.g.o
Subject: Re: [gentoo-user-hu] Re: CD eject probléma
Date: Thu, 24 Jun 2010 21:54:56
Message-Id: AANLkTilAWRnHI46fNJ7Jb8J1WTcX0qXpQ3RekQs01Lbu@mail.gmail.com
In Reply to: Re: [gentoo-user-hu] Re: CD eject probléma by Bukuli Norbert
Bocs hogy közbe röfögök nem olvastam végig mindent elég figyelmesen.
De nincs véletlen bekapcsolva a scsi emuláció????

On 23 June 2010 23:30, Bukuli Norbert <bukuli.norbert@×××××.com> wrote:
> A config magától generálódik, minden induláskor. > > $ sudo grep 0000:03:00.0 /var/log/dmesg > pci 0000:03:00.0: reg 24 32bit mmio: [0xf8000000-0xf8001fff] > pci 0000:03:00.0: PME# supported from D3hot > pci 0000:03:00.0: PME# disabled > ahci 0000:03:00.0: version 3.0 > ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode > ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part > ahci 0000:03:00.0: setting latency timer to 64 > > > $ sudo grep 0000:03:00.1 /var/log/dmesg > pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007] > pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103] > pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207] > pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303] > pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f] > jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02) > pci 0000:03:00.1: enabling device (0000 -> 0001) > pci 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > jmicron 0000:03:00.1: 100% native mode on irq 17 > pci 0000:03:00.1: setting latency timer to 64 > > Sajnos nem vagyok tisztában vele, hogy a PCI buszon milyen szabályok > szerint történik az eszközök számozása, de ha a .1 végűt összevetem a > korábban írtakkal, akkor lehet némi tartománybeli egyezést > megfigyelni: > > ide0 at 0xc000-0xc007,0xc102 on irq 17 > pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007] > > ill.: > > ide1 at 0xc200-0xc207,0xc302 on irq 17 > pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207] > > > Persze lehet, hogy ez két teljesen külön álló buszon szereplő > címtartomány és csak véletlen egybeesésről van szó. > > 2010/6/23 cjvt <cjvt@××××××××.hu>: >> Nem biztos de ez alapjan a NEC-nek a rule-ban nem a >> pci-0000:03:00.0 -on kene lennie? >> >> >> 2010. június 23. 22:44:52 dátummal Bukuli Norbert az alábbiakat írta: >>> Úgy értettem, hogy egy eject folyamán nem keletkezik semmilyen >>> bejegyzés a dmesgben. >>> >>> A vonatkozó sorok: >>> Probing IDE interface ide0... >>> hda: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive >>> hdb: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive >>> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >>> hda: UDMA/33 mode selected >>> hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >>> hdb: UDMA/66 mode selected >>> Probing IDE interface ide1... >>> ide0 at 0xc000-0xc007,0xc102 on irq 17 >>> ide1 at 0xc200-0xc207,0xc302 on irq 17 >>> ide_generic: please use "probe_mask=0x3f" module parameter for probing >>> all legacy ISA IDE ports >>> ide-gd driver 1.18 >>> ide-cd driver 5.00 >>> ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache >>> Uniform CD-ROM driver Revision: 3.20 >>> ide-cd: hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache >>> >>> ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>> ata4.01: HPA detected: current 234439535, native 234441648 >>> ata4.01: ATA-7: SAMSUNG HD120IJ, WZ100-33, max UDMA7 >>> ata4.01: 234439535 sectors, multi 16: LBA48 NCQ (depth 0/32) >>> ata4.01: configured for UDMA/133 >>> >>> ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320) >>> ata3.01: HPA detected: current 976771055, native 976773168 >>> ata3.01: ATA-8: WDC WD5000AAKS-22A7B0, 01.03B01, max UDMA/133 >>> ata3.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32) >>> ata3.01: configured for UDMA/133 >>> >>> >>> # lshw -C disk >>>   *-cdrom:0 >>>        description: DVD writer >>>        product: _NEC DVD_RW ND-3500AG >>>        physical id: 0 >>>        bus info: ide@0.0 >>>        logical name: /dev/hda >>>        version: 2.1B >>>        capabilities: packet atapi cdrom removable nonmagnetic dma lba >>> iordy audio cd-r cd-rw dvd dvd-r >>>        configuration: mode=udma2 status=nodisc >>>   *-cdrom:1 >>>        description: DVD writer >>>        product: PIONEER DVD-RW DVR-111D >>>        vendor: Pioneer >>>        physical id: 1 >>>        bus info: ide@0.1 >>>        logical name: /dev/hdb >>>        version: 1.19 >>>        capabilities: packet atapi cdrom removable nonmagnetic dma lba >>> iordy pm audio cd-r cd-rw dvd dvd-r >>>        configuration: mode=udma4 status=nodisc >>>   *-disk:0 >>>        description: ATA Disk >>>        product: WDC WD5000AAKS-2 >>>        vendor: Western Digital >>>        physical id: 0 >>>        bus info: scsi@2:0.1.0 >>>        logical name: /dev/sda >>>        version: 01.0 >>>        serial: WD-WMASY3020281 >>>        size: 465GiB (500GB) >>>        capabilities: partitioned partitioned:dos >>>        configuration: ansiversion=5 signature=24eeb6a2 >>>   *-disk:1 >>>        description: ATA Disk >>>        product: SAMSUNG HD120IJ >>>        physical id: 1 >>>        bus info: scsi@3:0.1.0 >>>        logical name: /dev/sdb >>>        version: WZ10 >>>        serial: S0AEJ1LYB06095 >>>        size: 111GiB (120GB) >>>        capabilities: partitioned partitioned:dos >>>        configuration: ansiversion=5 signature=a8a8a8a8 >>> >> >> > > > > -- > Üdvözlettel: > Bukuli Norbert > >
-- www.airndsoft.com Artificial Intelligence Research aNd Development Software Company

Replies

Subject Author
Re: [gentoo-user-hu] Re: CD eject probléma Bukuli Norbert <bukuli.norbert@×××××.com>