Gentoo Archives: gentoo-user-hu

From: Aleph <alephlg@×××××.com>
To: gentoo-user-hu@l.g.o
Subject: Re: [gentoo-user-hu] Compiz-gond :(
Date: Tue, 06 Mar 2007 09:58:38
Message-Id: c3e6dbbe0703060158q35f23034gb16dd223409947dd@mail.gmail.com
In Reply to: Re: [gentoo-user-hu] Compiz-gond :( by "Bujdosó Ferenc"
# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
   # Multiple FontPath entries are allowed (they are concatenated together)
   # By default, Mandrake 6.0 and later now use a font server independent of
   # the X server to render fonts.
   FontPath "unix/:-1"
EndSection

Section "ServerFlags"
   #DontZap # disable <Crtl><Alt><BS> (server abort)
   #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
   AllowMouseOpenFail # allows the server to start up even if the mouse does
not work
EndSection

Section "Module"
   Load "dbe" # Double-Buffering Extension
   Load "v4l" # Video for Linux
   Load "extmod"
   Load "type1"
   Load "freetype"
   Load "glx" # 3D layer
EndSection

Section "InputDevice"
   Identifier "Keyboard1"
#    Driver "keyboard"
   Driver "kbd"
#    Option "CoreKeyboard"
#    Option "XkbRules" "xorg"
#    Option "XkbModel" "logicdp"
#    Option "XkbModel" "pc105"
   Option "XkbLayout" "hu"
#    Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
   Identifier "Mouse1"
   Driver "mouse"
   Option "Protocol" "ExplorerPS/2"
#    Option "Device" "/dev/mouse"
   Option "Device" "/dev/input/mice"
   Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
   Identifier "monitor1"
   VendorName "Generic"
   ModelName "1280x1024 @ 60 Hz"
   HorizSync 31.5-64.3
   VertRefresh 50-70

   # TV fullscreen mode or DVD fullscreen output.
   # 768x576 @ 79 Hz, 50 kHz hsync
   ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630

   # 768x576 @ 100 Hz, 61.6 kHz hsync
   ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection

Section "Device"
   Identifier "device1"
   VendorName "nVidia Corporation"
   BoardName "NVIDIA GeForce 6800 (generic)"
   Driver "nvidia"
#    Driver "nv"

   Option         "DPMS"                  "true"
#   Option         "DRI"                   "true"
   Option         "MonitorLayout"         "DFP"
   Option         "NoRenderExtension"     "Off"
   Option         "RandRRotation"         "on"
   Option         "RenderAccel"           "true"
   Option         "AllowGLXWithComposite" "true"
   Option         "XAANoOffscreenPixmaps" "true"
#    Option         "Rotate"                "CW"

EndSection

#Section "DRI"
#   Group 0
#   Mode 0666
#EndSection

Section "Extensions"
#    Option "XEVIE"     "Enable"
   Option "Composite" "Enable"
#    Option "RENDER"    "Enable"
EndSection

Section "Screen"
   Identifier  "screen1"
   Device      "device1"
   Monitor     "monitor1"
   Option      "AddARGBGLXVisuals" "True"
   DefaultColorDepth 24

   Subsection "Display"
       Depth 8
       Virtual 1280 1024
   EndSubsection

   Subsection "Display"
       Depth 15
       Virtual 1280 1024
   EndSubsection

   Subsection "Display"
       Depth 16
       Virtual 1280 1024
   EndSubsection

   Subsection "Display"
       Depth 24
       Virtual 1280 1024
   EndSubsection
EndSection

Section "ServerLayout"
#   Option      "AIGLX" "true"
   Identifier  "layout1"
   InputDevice "Keyboard1" "CoreKeyboard"
   InputDevice "Mouse1" "CorePointer"
   Screen      "screen1"
EndSection


Bujdosó Ferenc <bujdoso@×××.hu> írta, 2007.03.06.:
> > Sziasztok:) > > Nekem ezzel a beállítással siman megy. ( xorg.conf mellékelve:) ) > Nv 6200 agp > intel p4 > intel 852 > > Nézd át, lehet hogy meg mindig hianyzik valami. > Ami a lényeg: > > Section "Device" > ... > Option "NoRenderExtension" "Off" > Option "RenderAccel" "true" > Option "AllowGLXWithComposite" "true" > ... > EndSection > > Section "DRI" > Group 0 > Mode 0666 > EndSection > > Section "Extensions" > ... > Option "Composite" "Enable" > ... > EndSection > > Section "ServerLayout" > Option "AIGLX" "true" > ... > EndSection > > > Aleph írta: > > Szerintem az inkább Device (arra gondoltam, ahol a videokártya adatait > > adhatod meg), és az amire hivatkoztam meg kell, hogy legyen, mert > > nélküle az > > X sem indul :-) > > Próbáld meg a Beryl-t a beryl-manager-rel indítani konzolból, és lehet > > baj > > esetleg jogosultsággal talán. Valamint talán megoldódik a baj a > > Beryl-manager menuiben egy-két antibug opció kiválasztásával. Ne > > felejtsd el > > az ablakkezelőt mindegyik változtatás után újraindítani! > > > > Aleph > > > > Simon László <wingtsun.miskolc@×××××.com> írta, 2007.03.05.: > >> > >> ...most nézem.....az xorg.conf -ban nekem nincs Section "Drivers" ..az > >> gáz? > >> > >> > >> Aleph írta: > >> > >> Nekem is fut felfele mint az Ĺ?rĂźlt mindefĂŠle error/warning, de megy. > >> Xorg.conf-ban benne van az addRGBVisuals, vagy milyen sor? Ez az a > >> vĂĄltozĂł amit az "emerge -1 nvidia-drivers" vĂŠgĂŠn lĂĄthatsz az > >> Ăźzenetben, ĂŠs a drivers szekciĂłba kĂŠr. > >> Most nincs tĂśbb Ăśtletem, de holnap megint leszek. > >> > >> Aleph > >> > >> Simon LĂĄszlĂł <wingtsun.miskolc@×××××.com > Ă­rta, 2007.03.05.: > >> > > >> > Mit is kell keresnem a /etc.env.d -ben? Nekem csak egy dolog van > >> > benne,valami udev bejegyzĂŠs....:( > >> > > >> > > >> > > >> > > >> > >> > > > # File generated by XFdrake. > > # ********************************************************************** > # Refer to the XF86Config man page for details about the format of > # this file. > # ********************************************************************** > > Section "Files" > # Multiple FontPath entries are allowed (they are concatenated > together) > # By default, Mandrake 6.0 and later now use a font server independent > of > # the X server to render fonts. > FontPath "unix/:-1" > EndSection > > Section "ServerFlags" > #DontZap # disable <Crtl><Alt><BS> (server abort) > #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) > AllowMouseOpenFail # allows the server to start up even if the mouse > does not work > EndSection > > Section "Module" > Load "dbe" # Double-Buffering Extension > Load "v4l" # Video for Linux > Load "extmod" > Load "type1" > Load "freetype" > Load "glx" # 3D layer > EndSection > > Section "InputDevice" > Identifier "Keyboard1" > # Driver "keyboard" > Driver "kbd" > # Option "CoreKeyboard" > # Option "XkbRules" "xorg" > # Option "XkbModel" "logicdp" > # Option "XkbModel" "pc105" > Option "XkbLayout" "hu" > # Option "XkbOptions" "compose:rwin" > EndSection > > Section "InputDevice" > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "ExplorerPS/2" > # Option "Device" "/dev/mouse" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Monitor" > Identifier "monitor1" > VendorName "Generic" > ModelName "1280x1024 @ 60 Hz" > HorizSync 31.5-64.3 > VertRefresh 50-70 > > # TV fullscreen mode or DVD fullscreen output. > # 768x576 @ 79 Hz, 50 kHz hsync > ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 > > # 768x576 @ 100 Hz, 61.6 kHz hsync > ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 > EndSection > > Section "Device" > Identifier "device1" > VendorName "nVidia Corporation" > BoardName "NVIDIA GeForce 6800 (generic)" > Driver "nvidia" > # Driver "nv" > > Option "DPMS" "true" > Option "DRI" "true" > Option "MonitorLayout" "DFP" > Option "NoRenderExtension" "Off" > Option "RandRRotation" "on" > Option "RenderAccel" "true" > Option "AllowGLXWithComposite" "true" > Option "XAANoOffscreenPixmaps" "true" > # Option "Rotate" "CW" > > EndSection > > Section "DRI" > Group 0 > Mode 0666 > EndSection > > Section "Extensions" > # Option "XEVIE" "Enable" > Option "Composite" "Enable" > # Option "RENDER" "Enable" > EndSection > > Section "Screen" > Identifier "screen1" > Device "device1" > Monitor "monitor1" > Option "AddARGBGLXVisuals" "True" > DefaultColorDepth 24 > > Subsection "Display" > Depth 8 > Virtual 1280 1024 > EndSubsection > > Subsection "Display" > Depth 15 > Virtual 1280 1024 > EndSubsection > > Subsection "Display" > Depth 16 > Virtual 1280 1024 > EndSubsection > > Subsection "Display" > Depth 24 > Virtual 1280 1024 > EndSubsection > EndSection > > Section "ServerLayout" > Option "AIGLX" "true" > Identifier "layout1" > InputDevice "Keyboard1" "CoreKeyboard" > InputDevice "Mouse1" "CorePointer" > Screen "screen1" > EndSection > >