| 1 |
Helló! |
| 2 |
|
| 3 |
Van valakinek ötlete mért állhat le a cd írás ilyen hibaüzenettel? |
| 4 |
Csak ha cd-rõl egész cd-t akarok másolni akkor jön, ha merevlemezrõl |
| 5 |
akkor nem. |
| 6 |
Most próbáltam elõször mióta 3.2.2-es KDE-re upgradeltem, bár amint |
| 7 |
látszik a 0.11.6-ra lefokozott k3b-nél is ott a hiba, pedig régen nem |
| 8 |
volt. A setupon semmit sem változtattam és régen nem volt vele gond. |
| 9 |
|
| 10 |
Ami még gond lehet a cdrdao, amit szintén újra tettem mert 1.1.8-a2 volt |
| 11 |
CVS-bõl rég , most meg az 1.1.8 ebuildbõl, miután elõjött a hiba, de ez |
| 12 |
sem segített... |
| 13 |
|
| 14 |
betettem a cdrecord felhasználói beállítások közé -raw96r opciót ahogy |
| 15 |
tanácsolta és így a cd-rõl cd-re másolást klónozással meg tudom |
| 16 |
csinálni, de az elég lassú... |
| 17 |
|
| 18 |
Van ötletetek, hogy tudnám visszaállítani a rendes, közvetlen cd-rõl |
| 19 |
cd-re másolást, mert a -raw96r opcióval meg a normál írás nem akar menni... |
| 20 |
|
| 21 |
Kösz! |
| 22 |
barnabás |
| 23 |
|
| 24 |
|
| 25 |
---------------------------------------------------------- |
| 26 |
System |
| 27 |
----------------------- |
| 28 |
K3b Version: 0.11.6 |
| 29 |
KDE Version: 3.2.2 |
| 30 |
QT Version: 3.3.0 |
| 31 |
|
| 32 |
cdrecord |
| 33 |
----------------------- |
| 34 |
scsidev: '/dev/ide/host0/bus0/target1/lun0/cd' |
| 35 |
devname: '/dev/ide/host0/bus0/target1/lun0/cd' |
| 36 |
scsibus: -2 target: -2 lun: -2 |
| 37 |
Warning: Open by 'devname' is unintentional and not supported. |
| 38 |
Linux sg driver version: 3.5.27 |
| 39 |
SCSI buffer size: 64512 |
| 40 |
/usr/bin/cdrecord: Warning: controller returns wrong size for CD |
| 41 |
capabilities page. |
| 42 |
/usr/bin/cdrecord: Warning: controller returns wrong size for CD |
| 43 |
capabilities page. |
| 44 |
/usr/bin/cdrecord: Warning: controller returns wrong size for CD |
| 45 |
capabilities page. |
| 46 |
/usr/bin/cdrecord: Warning: controller returns wrong size for CD |
| 47 |
capabilities page. |
| 48 |
Cdrecord-Clone 2.01a25 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg |
| 49 |
Schilling |
| 50 |
TOC Type: 3 = CD-ROM XA mode 2 |
| 51 |
Waiting for data on stdin... |
| 52 |
Using libscg version 'schily-0.8'. |
| 53 |
Driveropts: 'burnfree' |
| 54 |
atapi: 1 |
| 55 |
Device type : Removable CD-ROM |
| 56 |
Version : 0 |
| 57 |
Response Format: 1 |
| 58 |
Vendor_info : 'ATAPI ' |
| 59 |
Identifikation : 'CD-RW 40X12 ' |
| 60 |
Revision : 'V.PW' |
| 61 |
Device seems to be: Generic mmc CD-RW. |
| 62 |
Current: 0x0009 |
| 63 |
Profile: 0x000A |
| 64 |
Profile: 0x0009 (current) |
| 65 |
Profile: 0x0008 |
| 66 |
Profile: 0x0002 (current) |
| 67 |
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). |
| 68 |
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED |
| 69 |
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R |
| 70 |
Drive buf size : 1981056 = 1934 KB |
| 71 |
FIFO size : 4194304 = 4096 KB |
| 72 |
/usr/bin/cdrecord: Warning: controller returns wrong size for CD |
| 73 |
capabilities page. |
| 74 |
/usr/bin/cdrecord: Warning: controller returns wrong size for CD |
| 75 |
capabilities page. |
| 76 |
Track 01: data 570 MB |
| 77 |
Total size: 652 MB (64:39.77) = 290983 sectors |
| 78 |
Lout start: 653 MB (64:41/58) = 290983 sectors |
| 79 |
Current Secsize: 2048 |
| 80 |
ATIP info from disk: |
| 81 |
Indicated writing power: 5 |
| 82 |
Is not unrestricted |
| 83 |
Is not erasable |
| 84 |
Disk sub type: Medium Type B, low Beta category (B-) (4) |
| 85 |
ATIP start of lead in: -11834 (97:24/16) |
| 86 |
ATIP start of lead out: 359849 (79:59/74) |
| 87 |
Disk type: Short strategy type (Phthalocyanine or similar) |
| 88 |
Manuf. index: 24 |
| 89 |
Manufacturer: SONY Corporation |
| 90 |
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 68866 |
| 91 |
Forcespeed is OFF. |
| 92 |
Starting to write CD/DVD at speed 16 in real SAO mode for single session. |
| 93 |
Last chance to quit, starting real write in 2 seconds. |
| 94 |
1 seconds. |
| 95 |
0 seconds. Operation starts. |
| 96 |
Waiting for reader process to fill input buffer ... input buffer ready. |
| 97 |
BURN-Free is ON. |
| 98 |
Performing OPC... |
| 99 |
Sending CUE sheet... |
| 100 |
/usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum |
| 101 |
pregapsize = 1. |
| 102 |
/usr/bin/cdrecord: Success. send_cue_sheet: scsi sendcmd: no error |
| 103 |
CDB: 5D 00 00 00 00 00 00 00 20 00 |
| 104 |
status: 0x2 (CHECK CONDITION) |
| 105 |
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 |
| 106 |
Sense Key: 0x5 Illegal Request, Segment 0 |
| 107 |
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 |
| 108 |
Sense flags: Blk 0 (not valid) |
| 109 |
resid: 32 |
| 110 |
cmd finished after 0.000s timeout 200s |
| 111 |
/usr/bin/cdrecord: CUE sheet still not accepted. Please try to write in |
| 112 |
RAW (-raw96r) mode. |
| 113 |
/usr/bin/cdrecord: Cannot send CUE sheet. |
| 114 |
/usr/bin/cdrecord: Could not write Lead-in. |
| 115 |
Writing time: 13.258s |
| 116 |
/usr/bin/cdrecord: fifo had 64 puts and 0 gets. |
| 117 |
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was |
| 118 |
100%. |
| 119 |
BURN-Free was never needed. |
| 120 |
|
| 121 |
cdrecord comand: |
| 122 |
----------------------- |
| 123 |
/usr/bin/cdrecord -v gracetime=2 dev=/dev/ide/host0/bus0/target1/lun0/cd |
| 124 |
-dao driveropts=burnfree -eject -overburn -waiti -xa1 -tsize=598261048 - |
| 125 |
|
| 126 |
|
| 127 |
-- |
| 128 |
gentoo-user-hu@g.o mailing list |
Archives