Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-user-hu
Navigation:
Lists: gentoo-user-hu: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: gentoo-user-hu@g.o
From: drstrange <strangedr@g.o>
Subject: Re: nvidia meg mindig
Date: Fri, 16 Jan 2004 00:11:28 +0100
Kispal Szabolcs wrote:

>On Thursday 15 January 2004 18.14, Balazs Pocze wrote:
>  
>
>>Kispal Szabolcs wrote:
>>    
>>
>>>Egyszeruen nem megy! Ha tudtok akkor segitsetek!
>>>
>>>Geforce M400 as kartyam van de nem birom tovabra sem feltelepiteni az 
>>>nvidia drivert sajat forditasu 2.6 os kernelemre.
>>>
>>>volt mar nvidia-kernel, nvidia-glx, opengl-update, symlinket is
>>>atjavitottam, XF86Configba is atirom a nv-t nvidiara.
>>>
>>>Es ekkor azt irja ki, hogy no screens found, mivel nem latja a kartyamat
>>>es igy nem tudja a drivert se betolteni. Ja amugy gdm-mel indul a
>>>rendszer. Mi lehet a hiba.
>>>
>>>ja es meg is lett patchelve, ha minden igaz a kernel.
>>>
>>>Elore is koszi
>>>      
>>>
>>hulye kérdés tudom, de be van töltve az nvidia modul?
>>
>>üdv,
>>   banyek
>>
>>
>>--
>>gentoo-user-hu@g.o mailing list
>>    
>>
>
>
>az /etc/modules.autoload.d/kernel-2.6 ba beirtam az nvidia -t ha erre 
>gondolsz.
>szoval be van toltve szerintem, meg az lsmod is azt irja ki, hogy be van 
>toltve
>
>egyeb otlet?
>  
>
Mivel ugyanilyen kártyám van, bemásolom az XF86Config fájlt ide, 
hasonlítsd össze, hátha rábukkansz valamire:

Section "Module"

# This loads the DBE extension module.

    Load        "dbe"          # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"
  #FontPath        "/usr/X11R6/lib/X11/fonts/artwiz"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath        "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#


# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

    FontPath     "/usr/X11R6/lib/X11/fonts/local"
    FontPath     "/usr/X11R6/lib/X11/fonts/misc"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
    FontPath     "/usr/X11R6/lib/X11/fonts/TTFnuovi"
    FontPath     "/usr/X11R6/lib/X11/fonts/artwiz-aleczapka"
    FontPath     "/usr/share/fonts/ttf-bitstream-vera"
    FontPath     "/usr/share/fonts/ttf/ja/aqua"
    FontPath     "/usr/local/share/fonts"
    FontPath     "/usr/share/fonts"
    FontPath     "/usr/X11R6/lib/X11/fonts"
    FontPath     "/usr/share/fonts/afms"
    FontPath     "/usr/share/fonts/ttf"
    FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath     "/usr/X11R6/lib/X11/fonts/freefont"
    FontPath     "/usr/X11R6/lib/X11/fonts/sharefont"
    FontPath     "/usr/X11R6/lib/X11/fonts/TTF"
    FontPath     "/usr/X11R6/lib/X11/fonts/ukr"
    FontPath     "/usr/share/fonts/ttf/ja"
EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier        "Keyboard1"
    Driver        "Keyboard"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option        "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"    "xfree86"
#    Option "XkbModel"    "pc101"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"        "xfree86"
    Option "XkbModel"        "pc105"
    Option "XkbLayout"        "hu_qwerty"
    Option "XkbOptions"        
"grp:switch,lv3:rwin_switch,grp_led:scroll,caps:shift_nocancel,altwin:left_meta_win"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier        "Mouse1"
    Driver        "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/psaux"
    Option "ZAxisMapping" "4 5"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"        "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"        "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "proview566"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   30.0-70.0

#    HorizSync        30-64         # multisync
#    HorizSync        31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync        15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-160
    DisplaySize 313 232
EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier        "Standard VGA"
    VendorName        "Unknown"
    BoardName        "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset        "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam        256

#    Clocks        25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
    Identifier  "geforcemx"
    Driver      "nvidia"
    Option "CursorShadow" "true"
    Option "CursorShadowAlpha" "60"
    Option "DigitalVibrance" "3"
    Option "NvAGP"  "1"

        # unsupported card
    #VideoRam    65536
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "geforcemx"
    Monitor     "proview566"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
                Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection



--
gentoo-user-hu@g.o mailing list

Replies:
Re: nvidia meg mindig
-- Kispal Szabolcs
References:
nvidia meg mindig
-- Kispal Szabolcs
Re: nvidia meg mindig
-- Balazs Pocze
Re: nvidia meg mindig
-- Kispal Szabolcs
Navigation:
Lists: gentoo-user-hu: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
Re: nvidia meg mindig
Next by thread:
Re: nvidia meg mindig
Previous by date:
Re: nvidia meg mindig
Next by date:
Re: nvidia meg mindig


Updated Jun 17, 2009

Summary: Archive of the gentoo-user-hu mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.