| 1 |
I have two |
| 2 |
<http://www.linuxquestions.org/questions/showthread.php?t=550380#>GeForce |
| 3 |
8800 GTS. Both are picked up by lspci (output listed at the end of the |
| 4 |
message). When I start X, I get errors saying that it can't initialize |
| 5 |
the second card so SLi will be disabled. 3D rendering does work however |
| 6 |
as I am able to run some 3d games and also run Beryl (even though I hate |
| 7 |
it and went back with fluxbox). I know my mobo is compatible with both |
| 8 |
the cards because 1) they (the GPUs) both work under WinDoze and 2) I |
| 9 |
had SLi enabled under Debian before I replaced it with Gentoo. I'm using |
| 10 |
the exact same proprietary drivers as I was using under Debain, and am |
| 11 |
using the same kernel config with the help of make oldconfig (I was |
| 12 |
using a custom compiled kernel under Debian as well). I'm attaching my |
| 13 |
/etc/X11/xorg.conf, /var/log/messages and /var/log/Xorg.0.log my |
| 14 |
message. Thank in advance, this is really bugging me and I may just be |
| 15 |
overlooking something simple. |
| 16 |
|
| 17 |
Thomas |
| 18 |
|
| 19 |
-[0000:00]-+-00.0 nVidia Corporation C51 Host Bridge |
| 20 |
+-00.1 nVidia Corporation C51 Memory Controller 0 |
| 21 |
+-00.2 nVidia Corporation C51 Memory Controller 1 |
| 22 |
+-00.3 nVidia Corporation C51 Memory Controller 5 |
| 23 |
+-00.4 nVidia Corporation C51 Memory Controller 4 |
| 24 |
+-00.5 nVidia Corporation C51 Host Bridge |
| 25 |
+-00.6 nVidia Corporation C51 Memory Controller 3 |
| 26 |
+-00.7 nVidia Corporation C51 Memory Controller 2 |
| 27 |
+-04.0-[0000:01]----00.0 nVidia Corporation G80 [GeForce |
| 28 |
8800 GTS] |
| 29 |
+-08.0 nVidia Corporation MCP55 Memory Controller |
| 30 |
+-09.0 nVidia Corporation MCP55 LPC Bridge |
| 31 |
+-09.1 nVidia Corporation MCP55 SMBus |
| 32 |
+-09.2 nVidia Corporation MCP55 Memory Controller |
| 33 |
+-0a.0 nVidia Corporation MCP55 USB Controller |
| 34 |
+-0a.1 nVidia Corporation MCP55 USB Controller |
| 35 |
+-0c.0 nVidia Corporation MCP55 IDE |
| 36 |
+-0d.0 nVidia Corporation MCP55 SATA Controller |
| 37 |
+-0d.1 nVidia Corporation MCP55 SATA Controller |
| 38 |
+-0d.2 nVidia Corporation MCP55 SATA Controller |
| 39 |
+-0e.0-[0000:02]----08.0 Texas Instruments TSB82AA2 |
| 40 |
IEEE-1394b Link Layer Controller |
| 41 |
+-0e.1 nVidia Corporation MCP55 High Definition Audio |
| 42 |
+-10.0 nVidia Corporation MCP55 Ethernet |
| 43 |
+-11.0 nVidia Corporation MCP55 Ethernet |
| 44 |
+-12.0-[0000:03]-- |
| 45 |
+-16.0-[0000:04]-- |
| 46 |
+-17.0-[0000:05]----00.0 nVidia Corporation G80 [GeForce |
| 47 |
8800 GTS] |
| 48 |
+-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] |
| 49 |
HyperTransport Technology Configuration |
| 50 |
+-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] |
| 51 |
Address Map |
| 52 |
+-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] |
| 53 |
DRAM Controller |
| 54 |
\-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] |
| 55 |
Miscellaneous Control |
Archives