1 |
Hi folks, perhaps someone can shed some light on this problem? |
2 |
|
3 |
nvidia driver fails to load. In dmesg I find this: |
4 |
|
5 |
nvidia: module license 'NVIDIA' taints kernel. |
6 |
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 |
7 |
PCI: Setting latency timer of device 0000:03:00.0 to 64 |
8 |
NVRM: The IO regions for your NVIDIA card are invalid. |
9 |
NVRM: Your system BIOS may have misconfigured your graphics card. |
10 |
NVRM: bar1 (framebuffer) appears to be wrong: 0x0 0x0 |
11 |
ACPI: PCI interrupt for device 0000:03:00.0 disabled |
12 |
nvidia: probe of 0000:03:00.0 failed with error -1 |
13 |
NVRM: the NVIDIA probe routine was not called for 1 device(s)!! |
14 |
NVRM: no devices probed, aborting! |
15 |
NVRM: this often occurs when rivafb is loaded and claims the device's |
16 |
resources. |
17 |
NVRM: try removing the rivafb module (or reconfiguring your kernel to |
18 |
remove |
19 |
NVRM: rivafb support) and then try loading the NVIDIA kernel module |
20 |
again. |
21 |
|
22 |
Now, this is an NVidia GeForce 6600 PCI-X card on an Intel SE7525RP2 |
23 |
motherboard with 1GB ram. Kernel 2.6.15 gentoo sources r1, nvidia |
24 |
drivers nvidia-kernel 1.0.6629-r5 and nvidia-glx 1.0.6629-r6. |
25 |
|
26 |
According to what little I've found on the web, there seems to be |
27 |
something weird with bios? I've tried cmos clear, and restarting with |
28 |
all cards unplugged, but I can't get it to work. |
29 |
Some sites suggested there might be some bios settings left if the |
30 |
pci-x had been plugged in before the ram expansion, which was the |
31 |
case here. |
32 |
|
33 |
Any suggestions? |
34 |
|
35 |
|
36 |
Thanks |
37 |
Jimmy |
38 |
-- |
39 |
gentoo-user@g.o mailing list |