1 |
on 02/22/2011 01:27 PM Mick wrote the following: |
2 |
> 2011/2/22 Thanasis <thanasis@××××××××××.org>: |
3 |
> |
4 |
>> How do we know which firmware file to load for which graphics card? |
5 |
>> (I have a Sapphire HD 5770 1GB GDDR5) |
6 |
>> |
7 |
> |
8 |
> I suspect it requires the JUNIPER_rlc.bin |
9 |
> |
10 |
> Check your dmesg/lspci/lshw for info on the chipset. |
11 |
> |
12 |
a section of the output of lswh shows: |
13 |
|
14 |
*-display |
15 |
description: VGA compatible controller |
16 |
product: Juniper [Radeon HD 5700 Series] |
17 |
vendor: ATI Technologies Inc |
18 |
physical id: 0 |
19 |
bus info: pci@0000:01:00.0 |
20 |
version: 00 |
21 |
width: 64 bits |
22 |
clock: 33MHz |
23 |
capabilities: pm pciexpress msi vga_controller |
24 |
bus_master cap_list rom |
25 |
configuration: driver=radeon latency=0 |
26 |
resources: irq:43 memory:d0000000-dfffffff |
27 |
memory:fe8c0000-fe8dffff ioport:b000(size=256) memory:fe8a0000-fe8bffff |
28 |
*-multimedia |
29 |
description: Audio device |
30 |
product: Juniper HDMI Audio [Radeon HD 5700 Series] |
31 |
vendor: ATI Technologies Inc |
32 |
physical id: 0.1 |
33 |
bus info: pci@0000:01:00.1 |
34 |
version: 00 |
35 |
width: 64 bits |
36 |
clock: 33MHz |
37 |
capabilities: pm pciexpress msi bus_master cap_list |
38 |
configuration: driver=HDA Intel latency=0 |
39 |
resources: irq:44 memory:fe8fc000-fe8fffff |
40 |
|
41 |
So it's probably the one you say, but in /lib64/firmware/radeon there are: |
42 |
JUNIPER_me.bin |
43 |
JUNIPER_pfp.bin |
44 |
JUNIPER_rlc.bin |
45 |
What is the difference between them? |
46 |
And which package owns them? Because equery shows nothing. |
47 |
|
48 |
equery b /lib64/firmware/radeon/JUNIPER_* |
49 |
* Searching for |
50 |
/lib64/firmware/radeon/JUNIPER_me.bin,/lib64/firmware/radeon/JUNIPER_pfp.bin,/lib64/firmware/radeon/JUNIPER_rlc.bin |
51 |
... |
52 |
# |