| 1 |
On Wed, Jul 31, 2013 at 09:11:22PM +0300, Thanasis wrote: |
| 2 |
> Early during booting phase, dmesg shows: |
| 3 |
> |
| 4 |
> [ 0.515651] ata6: SATA max UDMA/133 abar m8192@0xfdefe000 port |
| 5 |
> 0xfdefe180 irq 17 |
| 6 |
> [ 0.833387] ata6: SATA link down (SStatus 0 SControl 300) |
| 7 |
> |
| 8 |
> But later, it reports lots like the following stanza: |
| 9 |
> |
| 10 |
> [164362.715469] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4000000 |
| 11 |
> action 0xe frozen |
| 12 |
> [164362.715474] ata6: irq_stat 0x00000040, connection status changed |
| 13 |
> [164362.715479] ata6: SError: { DevExch } |
| 14 |
> [164362.715490] ata6: hard resetting link |
| 15 |
> [164363.433615] ata6: SATA link down (SStatus 0 SControl 300) |
| 16 |
> [164363.446934] ata6: EH complete |
| 17 |
> |
| 18 |
> Is it related to a disk drive, and if so, is there a way to know which |
| 19 |
> drive is on ata6? |
| 20 |
> |
| 21 |
> PS: There are two drives attached to the system, reported by dmesg like so: |
| 22 |
> [ 0.872490] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: |
| 23 |
> (80.0 GB/74.5 GiB) |
| 24 |
> [ 0.874828] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 |
| 25 |
> GB/232 GiB) |
| 26 |
|
| 27 |
Short and sweet... bad SATA cable, bad controller, or bad drive. |
| 28 |
|
| 29 |
Long and detailed later. |
| 30 |
-- |
| 31 |
Happy Penguin Computers >') |
| 32 |
126 Fenco Drive ( \ |
| 33 |
Tupelo, MS 38801 ^^ |
| 34 |
support@×××××××××××××××××××××.com |
| 35 |
662-269-2706 662-205-6424 |
| 36 |
http://happypenguincomputers.com/ |
| 37 |
|
| 38 |
A: Because it messes up the order in which people normally read text. |
| 39 |
Q: Why is top-posting such a bad thing? |
| 40 |
A: Top-posting. |
| 41 |
Q: What is the most annoying thing in e-mail? |
| 42 |
|
| 43 |
Don't top-post: http://en.wikipedia.org/wiki/Top_post#Top-posting |
Archives